Essex · England
Window & door mastic in High Easter, Essex
Window and door frames in High Easter need attention? We remove the old material, prepare the joints and seal them properly.
- White mastic on grey or black frames
- Draughts coming in around windows and doors
- Mastic that is falling out in pieces
Window mastic in High Easter
If you can feel air around a shut window, the gap is often at the frame. A new joint stops the air getting through and quietens the whistle on windy days. Where the air is getting in through the window itself, we’ll say so. If you are dealing with cracked internal joints between frame and plaster and mastic that’s falling out in pieces, we can help.
Somewhere as small as High Easter, older homes often have timber frames set in stone or brickwork. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- High Easter (CM1)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026

When something else is needed
To be straight with you, some problems need a different trade:
- Penetrating damp from a failed cavity tray or render
- Draughts through the window seals rather than the frame
- Rotten timber, which needs a joiner first
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly before you book.
Where we work in High Easter
- Patio & French doors
- Window sills
- Aluminium frames
- uPVC windows
- Composite doors
- Timber windows & doors
High Easter homes and the weather
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Parish Church of St Mary, the joint between an old wall and a newer frame is usually the first place rain gets in.
High Easter is about 7 miles north-west of Chelmsford, in Essex. Anywhere in CM1, we cover window mastic for homes and businesses. Our area takes in 644 places across Essex, from the larger towns to small villages. Our Chelmsford page covers work nearby, about 7 miles away.
Our applicators cover all of CM1 for window mastic and the streets around it. Window mastic is available to properties on The Street and Boreham Court and the roads around them. Other places close to High Easter include Stagden Cross (1 mile east), High Roding (2 miles north-west), Keeres Green (2 miles west), Roundbush Green (2 miles west) and Great Canfield (2 miles north-west). Further out, we also cover Chelmsford (7 miles south-east), Braintree (10 miles north-east), Harlow (11 miles west), Brentwood (13 miles south), Maldon (15 miles east) and Billericay (13 miles south).
Near you in High Easter
Typical jobs here are in homes near Cock And Bell pub. A little further out are Willingale Doe (4.5 miles south-west) and Broomfield Hospital (5.1 miles south-east).
Places near High Easter
Other services in High Easter
Common problems we fix in High Easter
Older frames were often sealed with products that set hard. Once it has hardened, the frame’s movement tears it from the wall, leaving a hairline gap down one side.
Look out for any of the following:
- A bead that does not match the frame
- Cracked internal joints between frame and plaster
- Leaking joints at the ends of sills
- Old mastic that has gone black or come away
Around High Easter, as everywhere, window mastic is only as good as the preparation behind it.
Comparing quotes
- How the colour is chosen
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant
- Is the old sealant removed completely?
Common questions in High Easter
Can you do window mastic in High Easter?
Yes, High Easter is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Is window mastic in High Easter guaranteed?
All our work, in High Easter and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
How much does window mastic cost in High Easter?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or drop us an email with a short description of the job.
Will resealing my frames help with draughts?
It will if the frame joint is the problem. We check where the draught is before any work starts.
How long should I leave it?
Cure times vary by product and the temperature. Before we leave, we will tell you the cure time.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
Aftercare tips
A little care helps the new joints last. We recommend:
- Avoid harsh chemicals near the mastic
- Use gentle cleaners on frames and sealant
- Keep jet washers away from the mastic
- Keep paint off silicone joints
Clean the frames with mild soapy water, and avoid solvent cleaners on the sealant.
Leaks generally show up in wet, windy weather, but resealing works best in dry conditions. Sorting cracked mastic early means the joint is sound before the bad weather.
What happens on the day
We keep the work tidy and contained to the area we’re working on, so you can get on with your day. Expect the work to take a morning for a couple of windows and a door. Somewhere as small as High Easter, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Each frame is looked over and we agree which ones need resealing.
- We remove the old mastic and clean the frame edge and wall.
- Where the gap is deep, backing rod goes in first.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- Every joint is tooled smooth and checked before we leave.
How to prepare
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
Get a quote
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Related advice
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Different surfaces, different methods
Patio & French doors
Heavy door frames can move more than windows. The sealant must cope with it without cracking.
uPVC windows
Plastic frames move a lot between a hot afternoon and a cold night, so we use a flexible, low-modulus sealant. We match white, brown, anthracite grey and black frames.
What affects the quote in High Easter
You’ll get a clear quote before any work starts. It takes into account:
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- The size of the job
- Which sealant suits the joint
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us for an honest opinion and a quote.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- The address or postcode of the job
- How many joints, rooms or windows are involved
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will explain what’s involved.
