Highland · Scotland
New-build mastic & snagging in Fearn, Highland
New build mastic for Fearn, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Joints pulling apart as timber shrinks
- Internal frame sealant that has split
- Sealant work across a run of new homes
New build mastic for homes and businesses in Fearn
Some new-home owners let the house settle before resealing. For small cosmetic gaps, that is reasonable, but a seal that is letting water through needs doing now. If you are dealing with kitchen sealant that has pulled off the wall and second-fix sealing on new plots, we can put it right.
Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. In older homes, timber floors move through the year too.
Each job carries a 12-month guarantee, large or small.
- Place
- Fearn (IV20)
- Region
- Highland
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Joints and finishes in Fearn homes
Fearn is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
In and around Fearn, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Fearn is about 13 miles north of Nairn, in Highland. Anywhere in IV20, we can carry out new build mastic at your property. Our area takes in 253 places across Highland, from the larger towns to small villages. There’s also a page for Aberdeen, about 80 miles away.
Postcode districts we cover here for new build mastic: IV20. Close by, we work in Hill of Fearn (1 mile north-west), Loans of Tullich (1 mile south-east), Balintore (2 miles south-east), Shandwick (2 miles south-east) and Arabella (2 miles south-west). Within a short drive, we also cover Nairn (13 miles south), Tain (5 miles north-west), Alness (12 miles south-west), Dornoch (8 miles north), Invergordon (10 miles south-west) and Fortrose (15 miles south-west). If you’re somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Fearn
The closest station to Fearn is Fearn station, about 1.5 miles west. Well-known places in the area include Milntown Castle (4.7 miles south-west). For a walk, there’s Loch Eye.
More services for Fearn
What sealant work can’t fix
We won’t take on work that won’t last, so these are the limits:
- Leaking fittings rather than failed sealant
- Baths and trays that move too much for sealant to cope with
- Structural cracks in walls or ceilings
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Where we work in Fearn
- Bathrooms & en suites
- Windows & doors
- Skirting & floors
- Plot handovers
- Kitchens
- Show homes
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Common problems we fix in Fearn
On many sites, sealant goes on in the final rush before handover. Dusty, unprimed joints are common, and the sealant sits on grit instead of the surface.
The most common problems we see are:
- Joints pulling apart as timber shrinks
- Leaking shower tray seals in a new home
- Untidy sealant flagged on a snagging list
- Sealant that never bonded to the surface
For new homes near Fearn station, it’s worth checking the sealant early, while snags are still fresh.
What your quote should include
- Which colour the sealant will be
- Whether they seal over old material or remove it
- What happens if they find a problem under the old sealant
- What the quote includes, VAT included or not
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Report sealant problems to your builder during the snagging period
- Keep water off fresh sealant until it has cured
- Look at the sealant regularly in the first couple of years
- Wipe joints with warm soapy water
Don’t stand on the bath edge or the lip of the tray. If a bath or tray moves when you stand in it, get it looked at.
Early snagging is easier snagging. Small faults turn into leaks if left.
How we quote for new build mastic
The price is agreed before any work begins. It’s based on:
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- Access and height
- Working hours on commercial sites
The cost reflects the work involved, not guesswork. That is why we ask about the job first and give you a clear price before any work starts.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- Whether it has been sealed before
- Where the job is, and your postcode
- The problem you’ve noticed
Getting a quote is simple: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand.
FAQs for Fearn
Will you come out to Fearn?
Yes, Fearn is covered. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
I let a flat near Fearn station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can email us at info@mrmastic.co.uk with the details for a clear quote.
When is the sealant fully cured?
That depends on the sealant used, so please follow the time we give you when we finish.
When is the best time to reseal in a new build?
For failed seals that let water through, the best time is now. Cosmetic gaps can wait until the first year or two of movement has passed.
How do I get a quote for new build mastic in Fearn?
Size, access and the old material all affect the cost. Ask us for a quote.
What colour sealant will you use?
Most bathroom joints are white or clear, but other colours are available. We match the colour to the finish before we begin.
Do you guarantee your work?
Yes, for a year. If anything isn’t right with the work within the year, let us know and we will sort it.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
How the visit works
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself generally takes a few hours for most snagging lists, longer for a run of plots, depending on the size of the job. Somewhere like Fearn may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- The failed sealant is removed completely.
- We clean out the dust and grit left from the build.
- Primer goes on where the surface and product need it, then the new sealant.
- Each bead is tooled and the cure times explained.
Before we arrive
- Let us know about parking restrictions
- Let us know about earlier repairs to the joints
- Clear items away from the joints we’re working on
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
Related advice
Surface by surface
Kitchens
As a new house dries, worktops and walls shift a little, opening gaps behind the upstand. A fresh flexible bead closes them.
Plot handovers
We work through plots to your schedule, sealing each room ready for handover. Joints are prepared properly before sealing.