Highland · Scotland
Commercial & hotel sealant in Fearn, Highland
Professional commercial sealant in and around Fearn, with old sealant always removed completely.
- Leaking joints in shower rooms and changing areas
- Failed joints in office kitchens and tea points
- Large numbers of bathrooms needing the same work
What happens if it’s left?
Sealant is easy to forget until an audit or inspection is due. Booking it in good time leaves room for the cure time before the visit, without a last-minute rush. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
Why choose Mr Mastic in Fearn
- Tidy, careful work
- Trusted Arbo and Everbuild sealants
- We never seal over old sealant
- Approved under the ARBOMaster scheme
Read our cost guide or customer reviews.
About our commercial sealant in Fearn
In showers and washrooms we use anti-fungal sanitary silicone, with a food-safe sealant by kitchen sinks where needed. We use sealants from Arbo and Everbuild, chosen to suit each joint. Common call-outs are for tired sealant in let properties and split sealant around staff kitchen worktops and sinks, across retail & leisure sites, office washrooms & kitchens and hotel bathrooms.
In a smaller place like Fearn, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Fearn (IV20)
- Region
- Highland
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Landlords, agents and businesses in Fearn
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Workplaces and buildings in Fearn
If you run a hotel, guest house or holiday let in a coastal place like Fearn, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, private landlords have to meet the Repairing Standard, and keeping sealant sound across a portfolio is part of that.
In and around Fearn, as anywhere, good commercial sealant starts with a clean, dry, properly prepared joint.
Fearn is about 13 miles north of Nairn, in Highland. From the centre of Fearn to the outskirts, we cover commercial sealant for every kind of property. Across Highland, we cover 253 places, Fearn among them. There’s also a page for Aberdeen, about 80 miles away.
We work across IV20 for commercial sealant and the streets around it. We also cover the places around Fearn: Hill of Fearn (1 mile north-west), Loans of Tullich (1 mile south-east), Balintore (2 miles south-east), Shandwick (2 miles south-east) and Arabella (2 miles south-west). We also work in nearby towns such as Nairn (13 miles south), Tain (5 miles north-west), Alness (12 miles south-west), Dornoch (8 miles north), Invergordon (10 miles south-west) and Fortrose (15 miles south-west). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
What’s near Fearn
The closest station to Fearn is Fearn station, about 1.5 miles west. A little further out are Milntown Castle (4.7 miles south-west). Not far away are Loch Eye.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
The process
You don’t need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes a few hours per room, so whole buildings are phased for a typical job. For a place like Fearn, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- Tell us the rooms, hours and site rules, and we will plan the programme.
- We go through your site’s paperwork needs, such as RAMS, before work begins.
- In each room, the old bead comes out and the joint is cleaned and treated.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
- Each finished area is checked with you and given a cure time.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
- Mention if the joints have been sealed before
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.
Advice
When to call us in Fearn
Internal washrooms and en suites without a window rely entirely on extraction, so if the fan is weak, steam lingers and the sealant stays damp. That’s when black mould sets into the bead.
Any of these means the joints need attention:
- Large numbers of bathrooms needing the same work
- Rental bathrooms that need resealing between tenants
- Split sealant around staff kitchen worktops and sinks
- Washrooms that need sorting before an inspection
For landlords with property near Fearn station, sealant work can be quoted for a single flat or a whole portfolio.
Before booking anyone
- Who does the work, and how experienced they are
- Whether they’re fully insured
- Whether VAT is included
- Whether you can choose the colour
Surface by surface
Office washrooms & kitchens
Long vanity tops have joints that hold water and grime. It’s cut out, cleaned and resealed in one neat line.
Rental portfolios
Good sealant prevents leaks that cause bigger repairs, especially where you rarely see the bathroom yourself.
Common questions in Fearn
I let a flat near Fearn station. Can you help?
Yes, we work for landlords and letting agents. You can email us at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.
Is Fearn within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Is commercial work guaranteed?
Yes. We give a 12-month guarantee on every job and are fully insured.
Can you reseal every bathroom in a hotel?
Yes. After a site walk, we agree the scope and sequence, and you get one clear quote.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
What does commercial sealant cost?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
How soon can a room be used after resealing?
Around 24 hours is typical for sanitary silicone. We tell your team the cure time for every area.
Quotes for commercial sealant in Fearn
There’s no set price list, because jobs vary so much. The quote depends on:
- Any mould that needs treating
- The old material and how stubborn it is
- The number and length of the joints
- The number of rooms or windows
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What we need to know
What to tell us when you ask for a quote:
- Whether it has been sealed before
- Photos by email, if that is easy
- The type of property
- How we’d reach the joints
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.