Aberdeenshire · Scotland
New Build Mastic in Craigo
New build mastic for Craigo and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Skirting joints opening in the first winter
- Worktop and upstand sealant coming away
- Sealant work across a run of new homes
Common questions in Craigo
Do you cover smaller places like Craigo?
Yes, Craigo is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Craigo in your area for new build mastic?
Yes, Craigo is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear quote.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Should I wait before resealing?
For failed seals that let water through, the best time is now. For small cosmetic gaps, waiting until the house has settled can save doing them twice.
What do you need from me for a quote?
A short description and the location, plus pictures if you have them. If we need more, we will ask.
New build mastic in Craigo, done properly
We work in new homes and on new-build sites across Craigo. Whether it’s one en suite or a run of plots, the method is the same: remove, clean, prime where needed, then a neat new bead. If you’re dealing with plot mastic for developers ahead of handover and gaps between new skirting and floors, we can help.
Around smaller Scottish places like Craigo, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
We stand behind the work with a one-year guarantee, so you’re not left on your own once the job is done.
- Location
- Craigo (DD10)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
New homes and floors in Craigo
Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.
Around Craigo, as everywhere, new build mastic is only as good as the preparation behind it.
Craigo is about 4 miles north-west of Montrose, in Aberdeenshire. Our applicators cover new build mastic for homes and businesses in Craigo and the surrounding area, as part of our work across Aberdeenshire. We cover 161 towns and villages across Aberdeenshire, large and small. We also work in Dundee, around 27 miles away.
Postcode districts we cover here for new build mastic: DD10. Nearby, we also carry out new build mastic in Marykirk (1 mile north), Hillside (2 miles south-east), Luthermuir (3 miles north-west), St Cyrus (4 miles east) and Sauchieburn (4 miles north-west). We also work in nearby towns such as Laurencekirk (5 miles north), Inverbervie (10 miles north-east), Ferryden (5 miles south) and Johnshaven (7 miles east).
What’s near Craigo
Craigo’s nearest station is Montrose station, about 4.2 miles south of the centre. Other landmarks nearby include Stracathro Hospital (4 miles west) and Inglismaldie Castle (3.2 miles north-west). Not far away are Duns Dish and St Cyrus National Nature Reserve.
Work for landlords, hotels and businesses
For anyone letting property in or around Craigo, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
When to call us in Craigo
A new house holds a lot of water from the build, and it dries out over the first couple of years. Drying timber shrinks and pulls joints apart.
Any of these means the joints need attention:
- Second-fix sealing on new plots
- Frame joints opening as the plaster dries
- Sealant that never bonded to the surface
- Gaps between new skirting and floors
For new homes near Montrose station, it’s worth checking the sealant early, while snags are still fresh.
What to look for in a quote
- When the joint can take water or movement
- How much experience the applicator has
- The length of the guarantee
- How the surfaces are prepared before sealing
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Record problems with dated pictures
- Wait for the cure time before using a resealed shower
- Do not seal over failed sealant yourself
- Wipe joints with warm soapy water
Leave the sealant for the cure time we give you before showering or bathing. Silicone is generally left for about a day to cure enough for use.
Mould takes hold quickly in sealant that has gaps or lifted edges. Dealing with it before it goes black saves a harder job later.
What affects the cost of new build mastic
We quote each job individually. These are the things that affect it:
- How much there is to do
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
- The type of sealant required
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Helping us quote
When you contact us, it’s useful to know:
- What’s wrong with the joints now
- If someone has resealed it before
- Where the job is, and your postcode
- The rough size of the job
We quote each job on its own, so the first step is telling us about yours. Simply email us at info@mrmastic.co.uk and describe the job and send pictures if you have them.
What we cannot put right
In fairness, there are a few things sealant will not fix:
- Structural cracks in walls or ceilings
- Damaged fittings that need replacing
- Movement caused by a poorly fitted tray or bath
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Bathrooms & en suites
- Show homes
- Plot handovers
- Skirting & floors
- Kitchens
- Windows & doors
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
How it works
There is not much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours for most snagging lists, longer for a run of plots, including the tidy-up. For a place like Craigo, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We look at why each joint failed, including any movement.
- We remove the failed sealant and clean the joints.
- We make sure the joints are dry and prime them if needed.
- Baths are filled with water, then the new sealant is applied.
- We check every joint and leave you with the cure times.
How to prepare
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
Getting a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.