Shetland Islands · Scotland

Gutter, fascia & soffit sealing in Toogs, Shetland Islands

Gutter sealing for Toogs, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Stop ends leaking at the end of a run
  • Wet patches on the wall under a gutter joint
  • Open joints in fascias and soffits

Trusted gutter sealing in Toogs

How the visit works

On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from an hour or two to a few hours. For a place like Toogs, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. First we trace the drip and check the gutter is not damaged.
  2. The old sealant and dirt are cleaned out of the joint.
  3. The joint is dried before sealing.
  4. We seal the joint with a sealant made for gutters.
  5. The gutter is checked and debris around the joints cleared.

How to prepare

  • Mention any sign-in or site rules at work premises
  • Plan for the work area to be out of bounds to pets and children
  • Clear the area around the work

How to get a quote

To get a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before work begins.

Get a price

Read more

Gutter sealing for homes and businesses in Toogs

Many dripping gutters are just a failed joint or end cap. The joint is cleaned, dried and resealed with a sealant made for guttering. If the gutter itself has failed, we say so. If you have streaks down the brickwork from a leaking joint and end caps that drip every time it rains, we can put it right, on gutter joints, garage door frames and uPVC fascias alike.

Older stone buildings need a sealant that suits the stone, not an acetoxy product that can mark or attack it. On newer homes, the movement joints and roofline trims are what need watching.

All of our work is guaranteed for twelve months, in Toogs and everywhere else we cover.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Location
Toogs (ZE2)
Wider area
Shetland Islands
Guarantee
One year on every job
Quotes
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026

Your questions about gutter sealing in Toogs

Does the coastal weather in Toogs affect outside sealant?

Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.

Is Toogs within the area you cover?

Yes, we do. We work across all of Scotland, islands included, and smaller places are part of that. Longer journeys are simply planned in advance.

When is the sealant fully cured?

Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint before we leave.

Will you leave a mess?

Not at all. We work neatly, protect the area around the joints and tidy up afterwards.

Do you replace gutters or fascias?

We do not replace gutters or fascias. We’ll tell you if the gutter needs replacing.

Do you offer different sealant colours?

Most of the time, yes. We’ll tell you which colours the right product comes in and agree one before we start.

How long will you be here?

Typically it takes anything from an hour or two to a few hours. Larger jobs naturally take longer, and we will tell you how long to expect.

Do you work for letting agents?

Yes. As well as homeowners, we work for landlords, agents, businesses and hotels across the Shetland Islands.

What affects the quote in Toogs

Your quote is based on your job. We look at:

  • Access and height
  • Mould in or behind the old joints
  • How many areas need sealing
  • Working hours on commercial sites

There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please email us at info@mrmastic.co.uk and we’ll talk you through it.

Helping us quote

To help us quote quickly, let us know:

  • Where the job is, and your postcode
  • If it’s domestic, commercial or a hotel
  • How we’d reach the joints
  • Any previous sealing or DIY work

We quote each job on its own. Simply send an email to info@mrmastic.co.uk and describe the job and send photos if you have them.

Common problems we fix in Toogs

Water spilling over a blocked gutter is often mistaken for a leak. If the downpipe is blocked, water has nowhere to go, which is why we look before we seal.

Keep an eye out for any of the following:

  • Water running down the wall below the gutter
  • Leaking gutter joints and stop ends
  • Gaps along fascia and soffit joints
  • Damp on an inside wall under a dripping gutter

For an older house near a landmark such as Burra Parish Church, an extension built onto an older house moves differently, and the joint between them takes the strain.

What your quote should include

  • What product goes in the joint
  • What insurance they hold
  • How long the guarantee is
  • Who turns up on the day

Choosing a sealant specialist

How to look after the new joints

Looking after new joints is easy:

  • Keep downpipes clear
  • Get a dropping gutter looked at quickly
  • Rest ladders on the wall, not the gutter
  • Check fascia and soffit joints for gaps

Look at fascia and trim joints when you are checking the gutters. A small split is quicker to put right.

If an end cap is dripping, deal with it before winter. Water down the wall all winter can cause damp inside.

Why deal with it now?

A dripping gutter joint keeps wetting the same patch of wall. Over time that can stain brickwork, mark render and encourage damp so early sealing is worthwhile. In a place like Toogs, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk for an honest opinion and a quote.

Why choose Mr Mastic in Toogs

  • We leave the area clean and tidy
  • Domestic, commercial and hotel work
  • 12-month guarantee on every job
  • Approved under the ARBOMaster scheme

Read how sealant jobs are priced and our reviews.

What sealant work cannot fix

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Cracked, split or warped gutter sections
  • Water backing up from a blocked pipe
  • Gutters that have dropped or pulled away

If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.

What we seal

  • uPVC fascias
  • Gutter joints
  • Soffit joints
  • Roofline trims
  • Garage door frames
  • Gutter end caps

Outside joints around Toogs

Toogs is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.

In and around Toogs, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.

Toogs is in the Shetland Islands. Homes, rented property, offices and hotels in Toogs is covered for gutter sealing, old or new, large or small. The work is guaranteed for a year. Our the Shetland Islands coverage runs to 63 places, and Toogs is one of them.

We cover every part of the ZE2 postcode area for gutter sealing. If you’re just outside Toogs, we cover Hamnavoe (1 mile north), Scalloway (4 miles north-east), Cunningsburgh (4 miles south-east), Bremirehoull (4 miles south-east) and Aithsetter (5 miles south-east). We also work in nearby towns such as Lerwick (7 miles north-east), Sound (7 miles north-east) and Sandwick (7 miles south-east). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.

What’s near Toogs

For a walk, there’s Hill of Berry and Loch of Couster.

Map of Toogs © OpenStreetMap contributors

DIY versus a professional finish

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job