Scottish Borders · Scotland
Nisbet Gutter Sealing
Problem with your gutter and fascia joints in Nisbet? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Stop ends leaking at the end of a run
- Water dripping where gutter sections meet
- Damp on an inside wall under a dripping gutter
Gutter sealing in Nisbet
Our work covers gutter joints and end caps as well as fascias and soffits plus roofline trims and garage door frames. It’s joint work rather than new guttering. Typical jobs include water running down the wall below the gutter and dripping gutter ends, on garage door frames, uPVC fascias and gutter joints.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard, so they need a sealant that moves with the building.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Nisbet (TD8)
- Wider area
- Scottish Borders
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Walls and rooflines in Nisbet
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.
In and around Nisbet, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Nisbet is about 13 miles north-east of Hawick, in the Scottish Borders. Jobs in Nisbet get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Nisbet is one of 89 towns and villages in the Scottish Borders where we work. Our Edinburgh page covers work nearby.
Work in TD8 works the same way as everywhere else we cover. Other places close to Nisbet include Ancrum (3 miles west), Jedburgh (3 miles south), Roxburgh (4 miles north-east), Heiton (4 miles north-east) and Maxton (5 miles north-west). We also work in nearby towns such as Galashiels (13 miles north-west), Hawick (13 miles south-west), Kelso (6 miles north-east), Selkirk (13 miles west), Wilton (13 miles south-west) and Melrose (10 miles north-west).
Near you in Nisbet
Well-known places in the area include Queen Mary's House (3.4 miles south-west) and Timpendean Tower (3 miles south-west). Open spaces near Nisbet include Peniel Heugh and Wooden Loch.
Also in Nisbet
What affects the quote in Nisbet
There’s no set price list. What we look at:
- Mould in or behind the old joints
- The number and length of the joints
- How many areas need sealing
- Working hours on commercial sites
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
What we need to know
What to tell us when you ask for a quote:
- How we’d reach the joints
- A few pictures by email, if you can
- Where the property is
- If someone has resealed it before
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Landlord and commercial work in Nisbet
For anyone letting property in or around Nisbet, several properties can go on one quote. Send us the addresses and the work at each.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Common problems we fix in Nisbet
A sealant applied to a damp or dirty joint will not bond. Rushed repairs often don’t last long.
The most common problems we see are:
- Drips from gutter joints and end caps
- Wet patches on the wall under a gutter joint
- Dripping gutter ends
- Failed sealant on a garage door frame
In the older streets around Crailing Parish Church, an extension built onto an older house moves differently, and the joint between them takes the strain.
Comparing quotes
- Who turns up on the day
- Is VAT in the price?
- How hidden problems are handled
- Are they insured?
Why deal with it now?
A dripping gutter joint keeps wetting the same patch of wall. Over time that can stain brickwork, mark render and encourage damp so early sealing is worthwhile. In an older home around Nisbet, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
Why Nisbet clients choose us
- Quality sealants from Arbo and Everbuild
- Full insurance on every job
- We agree the colour with you first
- Any old sealant cut out fully, not covered over
Take a look at our cost guide or what customers say.
Nisbet questions
Is Nisbet within the area you cover?
Yes. Nisbet is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
What guarantee comes with gutter sealing in Nisbet?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Is sealing fascia joints something you do?
Yes. Our work is the joints, and if a board is damaged, we’ll tell you.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then drop us a line at info@mrmastic.co.uk.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can I choose the sealant colour?
Generally, yes. Sealants come in white, clear, grey and other colours, and we’ll agree it with you first.
Aftercare tips
A little care helps the new joints last. We recommend:
- Have sagging gutters refixed early
- Clear leaves and moss from the gutters
- Look along the fascias for open joints
- Watch the wall under the gutters for staining
Keep the gutters clear of leaves and moss, so water drains away past the joints. Standing water strains every seal.
Leaking gutter joints get worse over time. Water keeps hitting the same part of the wall and that can cause damp inside.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes anything from an hour or two to a few hours for a typical job. Outdoor work around Nisbet depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We start by tracing the leak and checking the gutter itself is sound.
- The joint or trim is cleaned out and old sealant removed.
- The joint is dried, because sealant won’t bond to a wet surface.
- Gutter or exterior sealant is applied and finished.
- The run is checked and any debris near the joints is cleared.
Before we arrive
- Keep pets and children clear of the area while we work
- Where the joints are inside, avoid wetting them before we arrive
- On commercial sites, let us know about site rules
Get a quote
We quote each job on its own. Just email us at info@mrmastic.co.uk with the details.
Read more
What sealant work can’t fix
It helps to know what we can’t do:
- Problems with the roof covering
- Downpipes that are blocked or broken
- Brackets that have snapped or loosened
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.
Surfaces we seal
- Roofline trims
- Gutter joints
- Garage door frames
- Gutter end caps
- Soffit joints
- uPVC fascias