Scottish Borders · Scotland
Gutter Sealing in Melrose
Gutter sealing for Melrose, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Old sealant on roofline trims that has split
- Damp on an inside wall under a dripping gutter
- Rain getting in around a garage door
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Check that water runs out of the downpipes
- Do not leave a sagging gutter
- Keep an eye out for wet patches below a joint
- Keep ladders off the guttering
Have a look at the gutter during a downpour. It’s the easiest time to see a leak.
The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.
Gutter sealing for homes and businesses in Melrose
Open fascia and soffit joints spoil the roofline and can let weather in. They’re sealed in a matching colour where one is available. Typical jobs include trim joints where the sealant has failed and stop ends leaking at the end of a run, across gutter joints, garage door frames and soffit joints.
Older stone buildings need a sealant that suits the stone, not an acetoxy product that can mark or attack it. Newer houses need their movement joints and roofline trims kept sound.
There’s a 12-month guarantee on every job, large or small.
- Where
- Melrose (TD6)
- Wider area
- Scottish Borders
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Why act early in Melrose
You do not need to replace a garage door because rain gets in round the frame. Resealing the frame joint is often enough. In a place like Melrose, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Melrose
- Tidy, careful work
- Colour picked to suit the job
- Fully insured
- Quality sealants from Arbo and Everbuild
Read what affects the cost and customer reviews.
What sealant work can’t fix
Before booking, it’s worth knowing the limits:
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Brackets that have snapped or loosened
- Cracked, split or warped gutter sections
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- uPVC fascias
- Roofline trims
- Garage door frames
- Gutter end caps
- Gutter joints
- Soffit joints
Nearby places to Melrose
More services for Melrose
What affects the quote in Melrose
You will get a clear quote before we start. It’s based on:
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- Which sealant suits the joint
- The old material and how stubborn it is
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- Whether it has been sealed before
- The rough size of the job
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.
When to call us in Melrose
End caps get knocked or pushed by water. Once the seal behind them fails, they drip.
The most common problems we see are:
- Internal damp traced to a gutter joint
- Water dripping where gutter sections meet
- Wet patches on the wall under a gutter joint
- Garage door frames letting rain in
Letting a property close to Tweedbank station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
What to look for in a quote
- How the joint is cleaned and prepared
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- What product goes in the joint
Questions from Melrose
Will you come out to Melrose?
Yes. Melrose is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Tweedbank station?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.
How long does gutter sealing take?
As a guide, most jobs take anything from an hour or two to a few hours. Bigger jobs take longer, and we will tell you how long to expect.
Is gutter cleaning part of the job?
We clear debris around the joints we are sealing. A full clean of the gutters is not part of it.
How do I get a quote for gutter sealing in Melrose?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before any work starts.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can sealant stop a sagging gutter leaking?
Sealant will not hold a sagging gutter. The gutter needs refixing by a gutter installer.
What happens on the day
The work is kept neat and contained to the joints we are treating, so you can carry on as normal. The job generally takes a few hours, depending on the number of joints and the access, and we tell you how long to leave it before we go. For a place like Melrose, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we trace the drip and check the gutter isn’t damaged.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- The gutter is checked and debris around the joints cleared.
Preparing for the visit
- Tell us if parking is tricky
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Related advice
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Melrose buildings and the weather
Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
In and around Melrose, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Melrose is about 3 miles east of Galashiels, in the Scottish Borders. From the centre of Melrose to the outskirts, we cover gutter sealing for every kind of property. Across the Scottish Borders, we cover 89 places, Melrose among them. There’s also a page for Edinburgh, roughly 30 miles from Melrose.
Postcode districts we cover here for gutter sealing: TD6. Whether your property is on High Street, Market Square and St Dunstan's Park or anywhere close by, we can help. Main roads around Melrose include the B6359 and B6361, which makes travel easy. Close by, we work in Gattonside (1 mile north), Darnick (1 mile west), Newstead (1 mile east), Tweedbank (2 miles west) and Bowden (2 miles south). Larger places within reach include Galashiels (3 miles west), Hawick (12 miles south), Kelso (11 miles east), Selkirk (6 miles south-west), Jedburgh (11 miles south-east) and Wilton (12 miles south).
Near you in Melrose
For rail, the closest station is Tweedbank station, about 1.5 miles west of the centre. A little further out are Commendators House Museum (under half a mile east) and Castle Holydean (2.4 miles south). Green spaces nearby include Eildon Hill North and Bemersyde Moss.