Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Markethill, Perth and Kinross
Gutter sealing for Markethill and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Trim joints where the sealant has failed
- Old gutter sealant that has let go
- Open joints in fascias and soffits
Markethill: your questions answered
Is there a guarantee on gutter sealing in Markethill?
All our work, in Markethill and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you do gutter sealing in Markethill?
Yes. Our work covers the whole of Scotland, and Markethill is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Do you replace gutters or fascias?
That is not something we do. We seal joints and replacement is a job for an installer.
Is sealing fascia joints something you do?
Yes. We seal open joints along fascias and soffits in a colour to suit.
Will sealant fix a dripping gutter joint?
In many cases, yes. Cleaning, drying and resealing the joint generally works. A split or warped section needs replacing.
Can I add another job to the visit?
Yes. Just list everything you need.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do you clean gutters?
We clear debris around the joints we are sealing. A full clean of the gutters is not part of it.
Gutter sealing in Markethill
We seal leaking gutter joints, end caps, fascia and soffit joints, along with roofline trims and garage door frames. It’s all about the joints rather than new guttering. Common call-outs are for rain getting in around a garage door and leaking gutter joints and stop ends, on soffit joints, gutter joints and roofline trims.
Outside joints can only be sealed when they’re dry, so work in Markethill depends on the weather. Tell us how to reach each wall, gutter and roofline.
All of our work is guaranteed for twelve months, in Markethill and everywhere else we cover.
- Where
- Markethill (PH13)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Deal with a drip before winter
- Rest ladders on the wall, not the gutter
- Look along the fascias for open joints
- Look for streaks or damp on the wall below gutters
Leave the new sealant to cure as we advise and avoid disturbing it.
A leaking stop end is best sealed before the wet months. Water down the wall all winter can cause damp inside.
Landlord and commercial work in Markethill
For anyone letting property in or around Markethill, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Also near Markethill
Other services in Markethill
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on the number of joints and the access. Around Markethill, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- First, we find the drip and check the gutter isn’t cracked or sagging.
- We clean out the joint and take out the old sealant.
- The joint is dried, because sealant will not bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
- Mention any leaks or damp you’ve noticed
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Advice
Different surfaces, different methods
Garage door frames
Frame-to-brick joints face the weather. An exterior sealant suits them.
uPVC fascias
We seal fascia joints, not replace the boards. If boards are damaged, we’ll tell you.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What affects the cost of gutter sealing
Call for a quick quote. What matters most is:
- The type of sealant required
- How many areas need sealing
- Any mould that needs treating
- The old material and how stubborn it is
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What we need to know
What to tell us when you ask for a quote:
- The type of property
- What’s wrong with the joints now
- Whether it has been sealed before
- Pictures of the joints, sent by email
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.
Walls and rooflines in Markethill
Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
For an older house near a landmark such as Abbey Church, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Markethill is about 5 miles south-east of Blairgowrie and Rattray, in Perth and Kinross. From the centre of Markethill to the outskirts, gutter sealing is available for homes and businesses alike. Our area takes in 107 places across Perth and Kinross, large and small. For nearby work, see our Dundee page (12 miles or so).
Jobs for gutter sealing in PH13 is quoted and booked the same way as anywhere else. If you are just outside Markethill, we cover Coupar Angus (1 mile north-west), Woodside (2 miles south-west), Burrelton (2 miles south-west), Ardler (3 miles north-east) and Carsie (4 miles north-west). Larger places within reach include Perth (12 miles south-west), Blairgowrie and Rattray (5 miles north-west), Letham (13 miles south-west), Scone (10 miles south-west), Tulloch (12 miles south-west) and Alyth (6 miles north).
What’s near Markethill
Other landmarks nearby include Kinclaven Castle (4.4 miles west) and Blairgowrie Community Hospital (4.6 miles north-west). For a walk, there’s Northballo Hill and Monk Myre.
Signs you need gutter sealing in Markethill
Overflowing gutters can look like leaking joints. If the downpipe is blocked, water has nowhere to go so we check the cause first.
People generally contact us when they notice one of these:
- Garage door frames letting rain in
- Leaking gutter joints and stop ends
- Earlier gutter repairs that have peeled off
- Streaks down the brickwork from a leaking joint
Around Markethill, as everywhere, gutter sealing is only as good as the preparation behind it.
What your quote should include
- Whether you can choose the colour
- Whether they seal over old material or remove it
- Whether VAT is included
- Who does the work, and how experienced they are