East Sussex · England
Gutter Sealing in Iford
Problem with your gutter and fascia joints in Iford? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Trim joints where the sealant has failed
- Quick sealant fixes on gutters that didn’t last
- Stop ends leaking at the end of a run
Honest limits
Before you book, it’s worth knowing the limits too:
- Downpipes that are blocked or broken
- Gutters that have dropped or pulled away
- Leaks from the roof rather than a joint
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Garage door frames
- Roofline trims
- Gutter end caps
- Soffit joints
- Gutter joints
- uPVC fascias
Gutter sealing in Iford
A leaking gutter joint marks the wall and wets the ground underneath. Resealing the joint is often all it needs, as long as the gutter is sound. We work on garage door frames, soffit joints and gutter joints, and common reasons people get in touch are rain getting in around a garage door and end caps that drip every time it rains.
In a village or hamlet like Iford, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Iford (BN7)
- Region
- East Sussex
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What else we do in Iford
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Iford and across East Sussex. Several sites can be quoted together, and we are fully insured.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Iford buildings and the weather
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Monk's House (about 1.4 miles south-east) nearby, there’s older building stock in the area around Iford as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Rented homes near Lewes station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. If you look after a building such as Iford and Kingston Church of England Primary School, its movement joints, gutters and trims need looking after like any other building’s.
Iford is about 2 miles south of Lewes, in East Sussex. Every kind of property in Iford is covered for gutter sealing, old or new, large or small. Every job comes with our 12-month guarantee. Our East Sussex coverage runs to 289 places, Iford among them.
All of BN7 is within our area for gutter sealing. If you are just outside Iford, we cover Kingston near Lewes (1 mile north-west), Northease (1 mile south-east), Rodmell (1 mile south-east), Southover (2 miles north-east) and Lewes (2 miles north). Larger places within reach include Eastbourne (14 miles east), Seaford (7 miles south-east), Hailsham (12 miles east), Uckfield (10 miles north-east), Newhaven (5 miles south-east) and Peacehaven (4 miles south).
Near you in Iford
Around Iford, our work takes us to homes and buildings near Juggs Arms Public House, Priory School and Railway Land and the streets around them. Iford’s nearest station is Lewes station, roughly 1.7 miles north-east. Nearby you will also find Lewes Castle (1.7 miles north-east) and Brighton And Hove Albion Football Club Museum (3.3 miles west). Open spaces near Iford include Offham Hill and Southerham Farm.
How it works
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes anything from an hour or two to a few hours for a typical job. In a small place like Iford, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at the gutters, fascias and trims and agree the joints to seal.
- We clean out each joint.
- We make sure everything is dry.
- The sealant is applied and finished.
- We check our work before we leave.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
Getting a quote
We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or drop us an email.
Advice
Aftercare tips
A little care helps the new joints last. We recommend:
- Do not leave a sagging gutter
- Rest ladders on the wall, not the gutter
- Keep downpipes clear
- Watch for drips in a downpour
If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.
If an end cap is dripping, deal with it before winter. Water down the wall all winter can cause damp.
What affects the cost of gutter sealing
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The old material and how stubborn it is
- Whether there’s mould to deal with
- Access and height
- How many rooms, windows or areas are involved
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Call for a quick quote and we will explain what it covers.
What we need to know
When you call or email, these details help:
- Access, such as stairs, a lift or height
- Roughly how big the job is
- A few pictures by email, if you can
- Where the job is, and your postcode
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work.
Do you need gutter sealing in Iford?
End caps get knocked or pushed by water. Once the seal behind them fails, they drip and runs down the wall.
Any of these means the joints need attention:
- Drips from gutter joints and end caps
- Streaks down the brickwork from a leaking joint
- Open joints in fascias and soffits
- Cracked sealant along roofline trims
In the older streets around St Pancras Church (Kingston near Lewes), the joints between older walls, newer extensions and the roofline need a sealant that can move.
What to look for in a quote
- Whether they’re fully insured
- Which sealant they’ll use, and why
- How long to leave it before use
- How long the guarantee is
Iford questions
Can you help a landlord with a rental near Lewes station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Is Iford within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we will quote it together.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Will there be a smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Do you clean gutters?
We clear what’s around the joints we work on. A full clean of the gutters isn’t part of it.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.