Brighton and Hove · England
Hove Gutter Sealing
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for householders, landlords and businesses in Hove. Fully insured, ARBOMaster approved and guaranteed for a year.
- Earlier gutter repairs that have peeled off
- Failed sealant on a garage door frame
- Trim joints where the sealant has failed
Gutter sealing for homes and businesses in Hove
Our work covers gutter joints and end caps as well as fascias and soffits, along with roofline trims and garage door frames. It’s joint work, not replacing the gutter. If you are dealing with rain getting in around a garage door and streaks down the brickwork from a leaking joint, we can put it right, on gutter joints, roofline trims and soffit joints alike.
Plenty of homes in a town like Hove have been extended, and the joint where new wall meets old is a classic place for water to get in. Getting the joint depth right matters as much as the sealant itself.
Whatever the size of the job, it’s backed by our one-year guarantee in Hove and across Brighton and Hove.
- Location
- Hove (BN3, BN1, BN52)
- Region
- Brighton and Hove
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Surface by surface
Garage door frames
Garage door frames let rain in when their sealant fails. It’s removed and renewed.
uPVC fascias
Open fascia joints look untidy and can let water in. A neat bead closes them up.
Do you need gutter sealing in Hove?
Water spilling over a blocked gutter is often mistaken for a leak. If the downpipe is blocked, water has nowhere to go, which is why we look before we seal.
Signs it’s time to call us include:
- Rain getting in around a garage door
- Fascia boards with gaps between them
- Cracked sealant along roofline trims
- Old gutter sealant that has let go
Schools such as St Andrew's CofE (Aided) Primary School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
What to look for in a quote
- Whether the sealant suits the joint
- Who does the work, and how experienced they are
- How the joint is cleaned and prepared
- Which colour the sealant will be
Why act early in Hove
Water from a leaking joint hits the same spot every time. Left, it can stain walls and lead to damp so early sealing is worthwhile. Black mould and gaps in sealant don’t fix themselves, and in a busy home in Hove they get worse with every use. Now is the easy time to put it right.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why Hove customers choose us
- 12-month guarantee on every job
- Rated 4.9 stars on Google
- Old sealant always removed completely
- We agree the colour with you first
Also in Hove
What happens on the day
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours, depending on the number of joints and the access, depending on how much there is to do. A visit in Hove needs access to the work and a place to park close by. If the job is outside, mention gates, side access and anything above ground floor.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- The sealant is applied and finished.
- We check our work before we leave.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
How to get a quote
Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Related advice
Aftercare tips
A little care helps the new joints last. Our advice:
- Keep ladders off the guttering
- Watch the wall under the gutters for staining
- Make sure downpipes aren’t blocked
- Get leaks sealed before the wet months
Make sure downpipes are not blocked so the gutter can drain. A blocked pipe backs water up to the joints.
The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.
Your questions about gutter sealing in Hove
Can you help a landlord with a rental near Hove station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Does living near the coast affect gutter sealing in Hove?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. Walls facing the sea are normally the first to need attention.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
How long before the joint can be used?
Many sealants skin over quickly but take longer to cure fully. We’ll tell you how long to leave the joint before we leave.
Is it possible to stop a gutter joint dripping with sealant?
In many cases, yes. Cleaning, drying and resealing the joint usually works. A split or warped section needs replacing.
Is there any odour?
There can be a smell while the sealant cures. Opening a window helps.
Can you reach high gutters?
Low-level work is easiest. For anything higher, we will confirm what access is needed once we know more.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Walls and rooflines in Hove
Hove is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. With historic houses such as Preston Manor & Gardens (about 1.3 miles north-east) nearby, there’s older building stock in the area around Hove as well as newer homes. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
For an older house near a landmark such as Holy Trinity Church, the joints between older walls, newer extensions and the roofline need a sealant that can move. For landlords with property near Hove station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Hove is about 2 miles west of Brighton, in Brighton and Hove. From the centre of Hove to the outskirts, we cover gutter sealing for every kind of property. Our area takes in 30 places across Brighton and Hove, large and small.
All of BN3, BN1 and BN52 is covered for gutter sealing, from the main roads to the quietest streets. Streets in the area include Farm Road, York Road and Aymer Road, all of which we cover. Hove sits on or near the A270 and A2023. Neighbouring places we cover for gutter sealing include Brighton and Hove (1 mile north-west), Brunswick (1 mile south-east), Aldrington (1 mile west), Prestonville (1 mile north-east) and West Blatchington (1 mile north). Further out, we also cover Kemptown (3 miles east), Whitehawk (3 miles east), Moulsecoomb (3 miles east), Hollingbury (3 miles north-east), Bevendean (3 miles east) and Saltdean (6 miles east). Hove is among the bigger towns we cover in Brighton and Hove.
Near you in Hove
Around Hove, our work takes us to homes and buildings near The Drive Prep School, St. Ann's Well Gardens and The Urchin pub. There’s a railway station in Hove itself: Hove station. Well-known places in the area include British Engineerium (0.9 miles north) and Montefiore Hospital (0.7 miles east). The countryside around Hove includes Whitehawk Hill and Thundersbarrow Hill.
Landlords, agents and businesses in Hove
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.