Hampshire · England
Hound Gutter Sealing
Gutter sealing in Hound from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Earlier gutter repairs that have peeled off
- Trim joints where the sealant has failed
- Streaks down the brickwork from a leaking joint
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Don’t leave a sagging gutter
- Keep an eye out for wet patches below a joint
- Deal with a drip before winter
- Watch for drips in a downpour
If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.
Once roofline sealant splits, water can get behind it. Resealing early protects the boards and the wall below.
About our gutter sealing in Hound
Garage door frames let rain in when the sealant around them fails. We cut out the old sealant and reseal the frame using a sealant made for outdoor use. If you are dealing with stop ends leaking at the end of a run and earlier gutter repairs that have peeled off, we can help, whatever the surface.
Around Hound, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
Big or small, you get the same one-year guarantee.
- Location
- Hound (SO31)
- Region
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What we do, step by step
On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before we start. The work generally takes anything from an hour or two to a few hours. In a small place like Hound, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- We check our work before we leave.
Getting ready for the visit
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
For gutter sealing in Hound, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
Your questions about gutter sealing in Hound
Is gutter sealing in a coastal place like Hound any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
Is Hound within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What guarantee comes with the job?
All our work carries a 12-month guarantee, and we are fully insured.
Are you insured?
Yes. We are fully insured.
How long does gutter sealing take?
Typically it takes an hour or two for a few joints, longer for a full run. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme.
What do you need from me for a quote?
A short description and the location, plus photos if you have them. If we need more, we’ll ask.
What the job involves on each surface
Gutter end caps
We seal end caps from the inside where we can reach once clean and dry.
Roofline trims
Roofline trims rely on sealant at their joints. When it splits, water can get behind.
What gutter sealing looks like in Hound
Hound is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Rented homes near Netley station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls. For site and facilities teams at buildings such as The Hamble School, its movement joints, gutters and trims need looking after like any other building’s. If you live in an older home near Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Hound is about 3 miles east of Hythe, in Hampshire. We carry out gutter sealing for homes and businesses in Hound and the surrounding area, as part of our work across Hampshire. We cover 683 towns and villages across Hampshire, from the larger towns to small villages.
Every address in SO31 is covered for gutter sealing. Streets in the area include Hound Road, Hound Road Gardens and Hound Close. Nearby, we also carry out gutter sealing in Butlocks Heath (1 mile north), Netley (1 mile north-west), Hamble-le-Rice (1 mile south-east), Old Netley (1 mile north-east) and Bursledon (1 mile north-east). Larger places within reach include Winchester (13 miles north), Gosport (9 miles south-east), Havant (15 miles east), Eastleigh (6 miles north), Fareham (6 miles east) and Horndean (14 miles east).
Local landmarks in Hound
In Hound, that means homes and buildings near Netley Abbey Infant School, Westwood Woodland Park and Prince Consort Public House. Hound has its own railway station: Netley station. A little further out are Bursledon Brickworks Industrial Museum (2.2 miles north-east) and Netley Castle (1 mile west). The countryside around Hound includes Mercury Marshes.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
What we cannot put right
We’d rather tell you now than do work that will not last, so these are the limits:
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Downpipes that are blocked or broken
- Boards that have decayed or split
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before booking.
Where we work in Hound
- Garage door frames
- Soffit joints
- Gutter end caps
- Roofline trims
- Gutter joints
- uPVC fascias
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Why it’s worth doing now in Hound
A bead squeezed onto a wet joint might hold for a while but it tends to peel off. Cleaning out and drying the joint first is what makes it last. Around Hound, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why choose Mr Mastic in Hound
- A sealant colour to suit the surroundings
- More than 20 years in sealant work
- We leave the area clean and tidy
- Rated 4.9 stars on Google
Take a look at what affects the cost or customer reviews.