Hampshire · England
Bursledon Gutter Sealing
We cover Bursledon for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Damp patches inside below a leaking gutter
- Gaps along fascia and soffit joints
- Old sealant on roofline trims that has split
Gutter sealing in Bursledon, done properly
Gaps along uPVC fascias and soffits look untidy and can let in water and draughts. We seal them in a colour to suit where one is available. We work on roofline trims, gutter joints and garage door frames, and common reasons people get in touch are water running down the wall below the gutter and garage door frames letting rain in.
Homes around Bursledon range from older cottages to newer houses, with walls and rooflines of every type. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
Our work is backed for twelve months.
- Location
- Bursledon (SO31)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Bursledon
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Your questions about gutter sealing in Bursledon
Can you help a landlord with a rental near Bursledon station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Do you cover smaller places like Bursledon?
Yes. Bursledon is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will sealant fix a dripping gutter joint?
Yes, as long as the gutter itself is in good order. The joint is cleaned and dried first so the seal holds.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we’re using and why.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages to suit the site.
How long should I leave it?
Different products cure at different speeds, so follow the cure time we give you.
Can you reach high gutters?
Single-storey and low-level gutters are straightforward. For higher work, tell us about access and we will confirm what’s needed.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Surface by surface
Roofline trims
Trims along the roofline are often finished with sealant. When it splits, water can get behind.
Gutter end caps
Stop ends hold back water at the end of a run. A failed seal makes them leak.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Glance at the soffit joints now and then
- Rest ladders on the wall, not the gutter
- Check that water runs out of the downpipes
- Watch the wall under the gutters for staining
Keep the gutters clear of leaves and moss, so water drains away past the joints. Water left in a gutter tests every joint.
A leaking garage frame lets water reach stored items. A reseal sorts it.
What affects the quote in Bursledon
Call for a quick quote. What matters most is:
- The type of sealant required
- The number of rooms or windows
- When we can work, for business premises
- Any mould that needs treating
What you pay reflects the work, not guesswork. That is why we ask about the job first.
What to tell us for a quote
When you contact us, it’s useful to know:
- Whether it has been sealed before
- Where the job is, and your postcode
- The problem you’ve noticed
- Any access issues, like height or stairs
There’s no standard price list. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or drop us an email.
Walls and rooflines in Bursledon
Bursledon is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. With historic houses such as Medieval Merchant's House (about 4 miles west) nearby, there’s older building stock in the area around Bursledon as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Homes close to St Paul’s Church include some older properties, and an extension built onto an older house moves differently, and the joint between them takes the strain. Managing a site like Bursledon Church of England Infant School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Rented homes near Bursledon station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
Bursledon is about 2 miles south of Hedge End, in Hampshire. Whether you are in the middle of Bursledon or further out, we cover gutter sealing for every kind of property, from flats and houses to offices and hotels. 683 places in Hampshire are on our list.
Here we cover the SO31 postcode area for gutter sealing. Gutter sealing is available to properties on High Street, Station Road and School Road and the roads around them. If you’re just outside Bursledon, we cover Lowford (1 mile north-west), Old Netley (1 mile west), Butlocks Heath (1 mile south-west), Hound (1 mile south-west) and Netley (2 miles south-west). Further out, we also cover Winchester (12 miles north), Gosport (9 miles south-east), Havant (14 miles east), Eastleigh (6 miles north), Fareham (6 miles south-east) and Horndean (13 miles east).
Near you in Bursledon
Locally, jobs take us to homes and businesses close to The Hamble School, Grove Park Business and Enterprise College and Westwood Woodland Park, among other places. For rail, the closest station is Bursledon station, about 0.5 miles south-east of the centre. Nearby you’ll also find Bursledon Brickworks Industrial Museum (1.1 miles east) and Coldeast (1.8 miles south-east). Open spaces near Bursledon include Netley Common.
What happens if it’s left?
Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. In a smaller place like Bursledon, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What you get with us
- Arbo and Everbuild products
- 4.9 on Google from 180+ five-star reviews
- We leave the area clean and tidy
- Fully insured
Take a look at how sealant jobs are priced or customer reviews.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What happens on the day
On the day, we start by going over the job with you. We protect the surfaces around the joints before we start. Most jobs take a few hours, depending on the number of joints and the access. In a smaller place like Bursledon, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
Getting a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work.