Hampshire · England
Gutter, fascia & soffit sealing in Butlocks Heath, Hampshire
Our applicators work in Butlocks Heath on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Stop ends leaking at the end of a run
- Garage door frames letting rain in
- Damp on an inside wall under a dripping gutter
Gutter sealing for homes and businesses in Butlocks Heath
A lot of gutter leaks come down to one tired joint. We clean out the joint, dry it and reseal it using a gutter sealant. If the gutter is broken or sagging, we will tell you. If you are dealing with drips from gutter joints and end caps and dripping gutter ends, we can put it right.
Older homes in small places like Butlocks Heath may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water generally gets in.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or send us an email.
- Place
- Butlocks Heath (SO31)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about gutter sealing in Butlocks Heath
Can you help a landlord with a rental near Netley station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Is Butlocks Heath within the area you cover?
Yes. Butlocks Heath is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can I choose the sealant colour?
We’ll suggest a colour to suit the surroundings. The product needed can limit the range.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
What does gutter sealing cost?
Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or email us and let us know what needs doing and where.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
How long does gutter sealing take?
That depends on the amount of work, but as a guide it takes anything from an hour or two to a few hours. We’ll tell you when we quote.
Butlocks Heath buildings and the weather
Butlocks Heath is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Historic houses like Medieval Merchant's House (about 3.2 miles north-west) are a reminder that the area around Butlocks Heath has older buildings as well as new. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.
Rented homes near Netley station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. If you look after a building such as Netley Abbey Infant School, larger buildings have long runs of movement joint that eventually need resealing.
Butlocks Heath is about 3 miles north-east of Hythe, in Hampshire. We provide gutter sealing to homeowners, landlords and businesses in Butlocks Heath and nearby, as part of our work across Hampshire. Butlocks Heath is one of 683 places in Hampshire where we work for gutter sealing.
All of SO31 is covered for gutter sealing, from the main roads to the quietest streets. That includes homes and businesses on Woolston Road, Old School Close and The Grove and the roads around them. Neighbouring places we cover for gutter sealing include Netley (1 mile south-west), Hound (1 mile south), Old Netley (1 mile north-east), Lowford (1 mile north-east) and Bursledon (1 mile north-east). Further out, we also cover Winchester (12 miles north), Gosport (10 miles south-east), Havant (15 miles east), Eastleigh (6 miles north), Fareham (6 miles east) and Horndean (14 miles east).
What’s near Butlocks Heath
We work in homes and buildings around The Hamble School, Grove Park Business and Enterprise College and Westwood Woodland Park and the streets around them. Butlocks Heath has its own railway station: Netley station. Well-known places in the area include Westquay (3.4 miles north-west) and Bursledon Brickworks Industrial Museum (2.2 miles east). For a walk, there’s Mercury Marshes.
Quotes for gutter sealing in Butlocks Heath
Your quote is based on your job. We look at:
- The size of the job
- The type of sealant required
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will explain what it covers.
Asking for a quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- The type of property
- If someone has resealed it before
- How many joints, rooms or windows are involved
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved.
When to call us in Butlocks Heath
Roofline sealant ages in sun and rain. It hardens, shrinks and splits over time.
People normally contact us after spotting something like this:
- Drips from gutter joints and end caps
- End caps that drip every time it rains
- Streaks down the brickwork from a leaking joint
- Rain getting in around a garage door
Homes close to Church of St Mary include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- How the surfaces are prepared before sealing
- The length of the guarantee
- Is the old sealant removed completely?
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Fascias that need replacing
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- A gutter length that has split
If in doubt, phone 0345 464 0079 or email us and we will say what we think.
What we seal
- Soffit joints
- Garage door frames
- Gutter end caps
- Roofline trims
- Gutter joints
- uPVC fascias
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Do not lean ladders against the gutter itself
- Keep the gutters clear of debris
- Get a dropping gutter looked at quickly
- Check that water runs out of the downpipes
Clear the gutters once or twice a year, so water drains away past the joints. Standing water strains every seal.
The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.
What we do, step by step
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. It normally takes anything from an hour or two to a few hours. Somewhere as small as Butlocks Heath, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by tracing the leak and checking the gutter itself is sound.
- We clean out the joint and take out the old sealant.
- We make sure the joint is dry before sealing.
- We seal the joint with a sealant made for gutters and outdoor use.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
Get a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
Related advice
What the job involves on each surface
uPVC fascias
Open fascia joints look untidy and can let water in. Sealing them closes the gap.
Gutter end caps
End caps are resealed where they meet the gutter, after cleaning and drying.