Hampshire · England
Finkley Gutter Sealing
We cover Finkley for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly.
- Dripping gutter ends
- Internal damp traced to a gutter joint
- Streaks down the brickwork from a leaking joint
Quotes for gutter sealing in Finkley
Jobs vary more than people expect. What affects the quote:
- Whether there’s mould to deal with
- The type of sealant required
- The number and length of the joints
- Working hours on commercial sites
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
What we need to know
To make quoting easier, let us know:
- The problem you’ve noticed
- The rough size of the job
- Where the property is
- If someone has resealed it before
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.
About our gutter sealing in Finkley
A drip at a gutter joint is easy to ignore, but each shower sends water to the same place. Sealing it is quick if the gutter is otherwise in good order. Typical jobs include garage door frames letting rain in and dripping gutter ends, on roofline trims, uPVC fascias and gutter joints.
Around Finkley, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points.
We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.
- Where
- Finkley (SP11)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Rest ladders on the wall, not the gutter
- Have sagging gutters refixed early
- Keep the gutters clear of debris
- Check the gutters during heavy rain
Keep downpipes clear so the gutter can drain. Blockages push water back along the gutter.
Split sealant on fascias and trims lets water in behind. Resealing early protects the boards.
Gutter sealing in Finkley: local notes
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
If you let a flat or house near Andover station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. In the older streets around Christ Church, older walls, gutters and the joints where extensions meet them need a flexible sealant. If you look after a building such as Smannell and Enham Church of England (Aided) Primary School, its movement joints, gutters and trims need looking after like any other building’s.
Finkley is about 2 miles north-east of Andover, in Hampshire. Across the SP11 area, we can carry out gutter sealing at your property. Finkley is one of 683 towns and villages in Hampshire we cover. Southampton is on our list too, around 22 miles away.
All of SP11 is covered for gutter sealing, from the main roads to the quietest streets. Other places close to Finkley include Smannell (1 mile north-west), Finkley Down (1 mile south), Picket Piece (1 mile south-east), East Anton (1 mile south-west) and Little London (1 mile north-west). Within a short drive, we also cover Basingstoke (15 miles east), Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east) and Kempshott (13 miles east).
Around Finkley
We work in homes and buildings around The Oak pub and Winton Community Academy and the streets around them. The closest station to Finkley is Andover station, roughly 2.4 miles south-west. Well-known places in the area include Finkley Down Farm Museum (0.8 miles south) and Andover War Memorial Hospital (2.4 miles south-west). For a walk, there’s Mill Lake and Anton Lakes.
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
The process
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours, depending on the number of joints and the access. Somewhere like Finkley needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at where the water is coming from and check the gutter isn’t broken or sagging.
- The joint or trim is cleaned out and old sealant removed.
- We make sure the joint is dry before sealing.
- We seal the joint with a sealant made for gutters and outdoor use.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Mention any tricky access
- Tell us about any previous sealing or DIY attempts
- Mention any parking rules near the property
How to get a quote
Want a quote for gutter sealing? Please ring 0345 464 0079 or send us an email with a few details. We will explain what we’d do and send you a clear quote before work begins.
Read more
Common questions in Finkley
Do you cover Finkley for gutter sealing?
Yes, Finkley is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll send you a clear quote.
Will you come out to Finkley?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you seal fascia and soffit joints?
Yes. Our work is the joints, and if a board is damaged, we will tell you.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.
Can new sealant go over the old?
No, it won’t last. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.
Why it’s worth doing now in Finkley
Sealing over a dirty, wet joint is a quick fix that rarely lasts but it tends to peel off. Cleaning out and drying the joint first is what makes it last. Around Finkley, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
What you get with us
- We leave the area clean and tidy
- More than 20 years in sealant work
- Arbo and Everbuild products
- Anti-fungal sanitary silicone in wet areas
See our cost guide or what customers say.
What we cannot put right
A few problems are outside what sealant work can do:
- Guttering that needs replacing
- Sagging gutters or broken brackets
- Boards that have decayed or split
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
What we seal
- Gutter joints
- Soffit joints
- uPVC fascias
- Gutter end caps
- Roofline trims
- Garage door frames
Nearby places to Finkley
More services for Finkley
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.