Hampshire · England
Regrouting in Finkley, Hampshire
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Finkley, with a 12-month guarantee on every job. Ask us for a quote.
- Kitchen splashback grout stained by grease
- Stained grout that cleaning will not shift
- Discoloured grout on otherwise sound tiles
Regrouting in Finkley: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
In the older streets around Christ Church, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Smannell and Enham Church of England (Aided) Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Finkley is about 2 miles north-east of Andover, in Hampshire. If you need regrouting in Finkley, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We cover Hampshire from our Crawley base, Finkley included. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. You can also see our page for Southampton, about 22 miles away.
Here we cover the SP11 postcode area for regrouting. Other places close to Finkley include Smannell (1 mile north-west), Finkley Down (1 mile south), Picket Piece (1 mile south-east), East Anton (1 mile south-west) and Little London (1 mile north-west). Further out, we also cover Basingstoke (15 miles east), Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east) and Kempshott (13 miles east).
Local landmarks in Finkley
We work in homes and buildings around The Oak pub and Winton Community Academy. The nearest railway station is Andover station, about 2.4 miles south-west of the centre. Well-known places in the area include Finkley Down Farm Museum (0.8 miles south) and Andover War Memorial Hospital (2.4 miles south-west). Green spaces nearby include Mill Lake and Anton Lakes.
How we handle regrouting in Finkley
Grout is the filler between your tiles, and sealant is what goes along the bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. We rake it out and replace it, then reseal the corners and edges. Typical jobs include grout that’s cracking and breaking up and gaps where the shower grout has gone, across bathroom floors, wet rooms and tiled floors.
Somewhere as small as Finkley, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All our work is covered by a one-year guarantee.
- Where
- Finkley (SP11)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Other services in Finkley
Looking after it afterwards
After the cure time, these simple habits help:
- Rinse soap off the tiles after each shower
- Wipe or squeegee the shower walls
- Clean with a soft brush, not anything metal
- Avoid neat bleach and strong acid descalers on grout
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Run the extractor fan or open a window to help it dry out.
Grout that stays dark after cleaning is starting to fail. At this point it’s a simple regrout, before the joints open up.
What we do, step by step
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the work takes anything from a few hours to a full day, depending on the area in most cases. Somewhere like Finkley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- New grout is worked into the joints and cleaned off the tile faces.
- We reseal the internal corners and edges with silicone.
Before we arrive
- Tell us about any water getting in
- Let us know about parking restrictions
- Try not to wet indoor joints just before the visit
Get a quote
Need a quote? Please call 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and give you a clear price before we start.
Advice
What we can’t put right
We will not take on work that will not last, so these are the limits:
- A structure that flexes behind the tiles
- Tiles that are loose or hollow behind
- Waterproofing that has failed below the tiling
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before booking.
What we seal
- Wet rooms
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
- Shower walls
Leave it or put it right?
Regrouting won’t help where tiles have come away. We point that out first, so you can decide what to do. Where the tiles are sound, regrouting is far less disruptive than retiling. Around Finkley, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- Full insurance on every job
- A 12-month guarantee on all work
- Quality sealants from Arbo and Everbuild
- An ARBOMaster approved applicator
Read what affects the cost and what customers say.
When to call us in Finkley
A poor original job is a common cause. Grout that was too wet, not packed in or cleaned off too hard can wash out within a few years.
If you can see any of these, it’s time to have the joints looked at:
- Grout that stays dark however much it’s cleaned
- Dirty, worn grout on a tiled floor
- Grout in a colour the owner wants to change
- Good tiles let down by tired grout
Rented homes near Andover station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Questions to ask before you book
- What the quote includes, VAT included or not
- Which sealant they’ll use, and why
- How hidden problems are handled
- Is the old sealant removed completely?
Your questions about regrouting in Finkley
Do you cover Finkley for regrouting?
Yes, Finkley is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear quote.
Is Finkley within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or email us.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting agents, businesses and hotels in Finkley.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Can you regrout just the shower?
Yes. A lot of our jobs are only the shower, or the area where the grout has gone.
Can I do it myself?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What affects the cost of regrouting
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- The old material and how stubborn it is
- Mould in or behind the old joints
- Access and height
- The size of the job
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll go through it with you.
Asking for a quote
When you contact us, it’s useful to know:
- If someone has resealed it before
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will take it from there.