Hampshire · England
Finkley Floor Joint Sealing
Floor joint sealing in Finkley from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Failed seals where bathroom floors meet baths and panels
- Dirt and water collecting in open floor joints
- Gaps opening between the floor and skirting
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Subfloor problems that need a flooring contractor
- Leaks from a failed tanking system
- Loose, hollow or cracked tiles, which need a tiler
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
What we seal
- Commercial floors
- Skirting boards
- Tiled floors
- Wet room & bathroom floors
- Concrete floor joints
- Thresholds
Floor joint sealing in Finkley
Good floor joints come down to the right product and clean, prepared edges. Old caulk, grout or failed sealant comes out first, the joint is cleaned and backed where needed, then the new sealant goes in. We work on wet room & bathroom floors, skirting boards and thresholds, and common reasons people get in touch are grout cracking in a straight line across a floor and grout used at the floor edge instead of sealant.
Older homes in small places like Finkley often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
All of our work is guaranteed for twelve months, in Finkley and everywhere else we cover.
- Place
- Finkley (SP11)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Towns and villages near Finkley
More services for Finkley
Work for landlords, hotels and businesses
Landlords and letting agents in Finkley can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Floor joint sealing in Finkley: local notes
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you let a flat or house near Andover station, a tidy floor and skirting joint helps a rental look ready for the next tenant. If you look after a building such as Smannell and Enham Church of England (Aided) Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early.
Finkley is about 2 miles north-east of Andover, in Hampshire. We carry out floor joint sealing for homes and businesses in Finkley, as part of our work across Hampshire. Our area takes in 683 places across Hampshire. You can also see our page for Southampton, about 22 miles away.
Postcode districts we cover here for floor joint sealing: SP11. We also cover the places around Finkley: Smannell (1 mile north-west), Finkley Down (1 mile south), Picket Piece (1 mile south-east), East Anton (1 mile south-west) and Little London (1 mile north-west). We also work in nearby towns such as Basingstoke (15 miles east), Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east) and Kempshott (13 miles east).
Near you in Finkley
Typical jobs here are in homes near The Oak pub and Winton Community Academy, among other places. For rail, the closest station is Andover station, roughly 2.4 miles south-west. Nearby you’ll also find Finkley Down Farm Museum (0.8 miles south) and Andover War Memorial Hospital (2.4 miles south-west). Not far away are Mill Lake and Anton Lakes.
What happens on the day
On the day, we start by going over the job with you, so you know exactly what we are doing. We protect the surfaces around the joints before any work starts. The work generally takes a few hours, depending on the length of joint. For a village or hamlet like Finkley, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Getting ready for the visit
- Mention any tricky access
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
We quote each job on its own, so start by telling us what you need. Simply phone 0345 464 0079 or send us an email and describe the job.
Read more
Your questions about floor joint sealing in Finkley
Is Finkley within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Andover station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
How long will you be here?
That depends on the amount of work, but as a guide it takes a few hours, depending on the length of joint. We’ll give you a better idea when we quote.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in.
Can you reseal concrete floor joints in an industrial unit?
Yes, including warehouses, units, shops and offices. We can plan around your opening times.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Why act early in Finkley
Filling a skirting gap with caulk looks fine at first, so the gap reappears. A flexible sealant stretches instead and keeps the joint sealed. In a small place like Finkley, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why Finkley clients choose us
- Homes, businesses and hotels
- Arbo and Everbuild products
- We never seal over old sealant
- Sealant colour chosen to suit
See how sealant jobs are priced and our reviews.
When to call us in Finkley
Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away.
It’s worth asking for a quote if you see:
- Gaps at thresholds between rooms
- Gaps opening between the floor and skirting
- Cracked grout where a tiled floor needs a movement joint
- Rigid edge joints in tiled floors
For buildings such as Christ Church, floor and skirting joints in halls and kitchens wear like any others.
Comparing quotes
- Which sealant they’ll use, and why
- The length of the guarantee
- Is VAT in the price?
- Who turns up on the day
How we quote for floor joint sealing
The price is agreed before any work begins. It’s based on:
- The size of the job
- Whether the work is at height
- Which sealant suits the joint
- Whether there’s mould to deal with
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
When you contact us, these details help:
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
- If someone has resealed it before
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before we start.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Do not paint over silicone
- Check skirting joints after the heating season
- Use a well-wrung mop rather than flooding the floor
- Keep caulk for dry, still joints only
Avoid flooding the floor when you clean. Less water at the edges helps the joints last.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.