Hampshire · England

Gutter Sealing in Knights Enham

Problem with your gutter and fascia joints in Knights Enham? We remove the old material, prepare the joints and seal them properly.

  • Trim joints where the sealant has failed
  • End caps that drip every time it rains
  • Open joints in fascias and soffits

Book gutter sealing in Knights Enham

How it works

The work is kept neat and contained to the joints we are treating, so you can carry on as normal. The job generally takes a few hours, depending on the number of joints and the access. Somewhere as small as Knights Enham, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by tracing the leak and checking the gutter itself is sound.
  2. We clean out the joint and take out the old sealant.
  3. The joint is dried, because sealant will not bond to a wet surface.
  4. Gutter or exterior sealant is applied and finished.
  5. We check the run and clear any debris we find while we are there.

How to prepare

  • Mention any sign-in or site rules at work premises
  • Tell us about any previous sealing or DIY attempts
  • Tell us if parking is tricky

Getting a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or drop us an email.

Get a price

Related advice

Gutter sealing in Knights Enham

We don’t replace gutters, fascias or roofs. Sealant fixes joints and it cannot mend broken brackets, split sections or blocked downpipes. We work on gutter joints, uPVC fascias and soffit joints, and the jobs we see most are quick sealant fixes on gutters that didn’t last and cracked sealant along roofline trims.

In a village or hamlet like Knights Enham, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.

Each job carries a 12-month guarantee.

Where
Knights Enham (SP10)
Wider area
Hampshire
Cover
One year on every job
Quotes
A clear price before work begins
Phone
0345 464 0079
Last updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

How to look after the new joints

Looking after new joints is easy, and it makes a real difference:

  • Check fascia and soffit joints for gaps
  • Watch for drips in a downpour
  • Watch the wall under the gutters for staining
  • Clear leaves and moss from the gutters

While checking gutters, glance at the fascia joints too. Splits are easier to seal early.

If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches.

What affects the cost of gutter sealing

We quote each job individually. This is what makes a difference:

  • Mould in or behind the old joints
  • When we can work, for business premises
  • Whether the work is at height
  • The type of sealant required

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.

What to tell us for a quote

To make quoting easier, let us know:

  • What’s wrong with the joints now
  • The type of property
  • Whether it has been sealed before
  • Roughly how big the job is

There’s no standard price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.

Gutter sealing in Knights Enham: local notes

London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Letting a property close to Andover station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. In the older streets around Church of St Michael and All Angels, old and new materials meet at the roofline and walls, which is where sealant earns its keep. Schools such as Roman Way Primary School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.

Knights Enham is about 1 mile north of Andover, in Hampshire. Homes, rented property, offices and hotels in Knights Enham is covered for gutter sealing. Every job comes with our one-year guarantee. 683 places in Hampshire are on our list, from the larger towns to small villages. You can also see our page for Southampton, about 22 miles away.

Here we cover the SP10 postcode area for gutter sealing. Local streets include Manor Copse and Newbury Road. Other places close to Knights Enham include East Anton (1 mile south-east), Enham Alamein (1 mile north), Smannell (1 mile north-east), Upper Enham (1 mile north) and Finkley (1 mile east). Within a short drive, we also cover Winchester (14 miles south-east), Hyde (13 miles south-east), Tidworth (8 miles west), Weeke (13 miles south-east), Kempshott (15 miles east) and Stanmore (14 miles south-east).

Local landmarks in Knights Enham

Locally, jobs take us to homes and businesses close to Harrow Way Community School. Knights Enham’s nearest station is Andover station, roughly 1.5 miles south-west. Other landmarks nearby include Finkley Down Farm Museum (1.2 miles south-east) and Andover War Memorial Hospital (1.3 miles south-west). For a walk, there’s Mill Lake and Anton Lakes.

Map of Knights Enham © OpenStreetMap contributors

Why it’s worth doing now in Knights Enham

Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. In a small place like Knights Enham, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email.

Why us?

  • Rated 4.9 stars on Google
  • Arbo and Everbuild products
  • We never seal over old sealant
  • Fully insured

Take a look at how sealant jobs are priced or what customers say.

Your questions about gutter sealing in Knights Enham

Do you cover smaller places like Knights Enham?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Do you cover Knights Enham for gutter sealing?

Yes, Knights Enham is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing, and we will send you a clear quote.

Do I have to be there?

It depends on the job. Inside work needs someone to give us access.

Do you work on high-level gutters?

It depends on the access. Let us know the height and the ground below and we will confirm what’s needed.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

What does gutter sealing cost?

Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or email us and tell us what needs doing and where.

Will sealant fix a dripping gutter joint?

Generally, if the gutter is sound. The joint is cleaned and dried first so the seal holds.

Is sealant enough for a gutter that has dropped?

Sealing a sagging joint will not last. The gutter needs refixing by a gutter installer, and we will tell you if that’s what we find.

Honest limits

Some problems need a builder, plumber or other trade rather than us:

  • Problems with the roof covering
  • Cracked, split or warped gutter sections
  • Boards that have decayed or split

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.

Where we work in Knights Enham

  • Garage door frames
  • Gutter end caps
  • Soffit joints
  • Roofline trims
  • Gutter joints
  • uPVC fascias

DIY sealant or a professional job?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Different surfaces, different methods

uPVC fascias

We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.

Gutter end caps

End caps take the pressure of water running along the gutter. When their seal fails, they drip.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job