West Sussex · England
Gutter Sealing in Felpham
Gutter sealing across Felpham and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Wet patches on the wall under a gutter joint
- Fascia boards with gaps between them
- Failed sealant on a garage door frame
Gutter sealing for homes and businesses in Felpham
A lot of gutter leaks come down to one tired joint. The joint is cleaned, dried and resealed with a sealant made for guttering. If the gutter itself has failed, we say so. If you are dealing with leaking gutter joints and stop ends and fascia boards with gaps between them, we can put it right, whatever the surface.
Outbuildings, garages and conservatories around homes in places like Felpham add more joints to look after. Gutter ends, garage door frames and the joints where an extension meets the house are typical spots for leaks.
Every job is covered by our one-year guarantee, wherever you are in West Sussex.
- Where
- Felpham (PO22, PO21)
- Wider area
- West Sussex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Felpham: your questions answered
Is Felpham within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Does living near the coast affect gutter sealing in Felpham?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
Can I choose the sealant colour?
We’ll suggest a colour to suit the surroundings. The product needed can limit the range.
Is there any odour?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Can you fit new guttering?
That is not something we do. We seal joints; replacing gutters and fascias needs a gutter or roofline installer.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
What about gutters on a second or third storey?
Low-level work is easiest. We’ll confirm the access for higher gutters once we know more.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes anything from an hour or two to a few hours. In a smaller place like Felpham, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We look at where the water is coming from and check the gutter isn’t broken or sagging.
- The joint or trim is cleaned out and old sealant removed.
- The area is dried so the sealant can bond.
- Gutter or exterior sealant is applied and finished.
- We look along the gutter and clear debris around the joints.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
- Tell us about any water getting in
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Read more
What affects the quote in Felpham
You will get a clear quote before work begins. It takes into account:
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The number and length of the joints
- How many areas need sealing
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
What to tell us for a quote
You do not need to know the technical terms. It helps if you can tell us:
- Where the property is
- The rough size of the job
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
For gutter sealing in Felpham, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Common problems we fix in Felpham
Gutter joints rely on seals that age. Sun and cold make the gutter expand and contract and that movement opens up tired joints.
The most common problems we see are:
- Earlier gutter repairs that have peeled off
- Drips from gutter joints and end caps
- Fascia boards with gaps between them
- Trim joints where the sealant has failed
For landlords with property near Bognor Regis station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
What your quote should include
- Are they insured?
- Whether the sealant suits the joint
- How the colour is chosen
- How the surfaces are prepared before sealing
Why deal with it now?
New gutters cost far more than a few resealed joints. Where the gutter is in good order and only a joint leaks, resealing is the sensible fix. If it’s broken or sagging, a gutter installer needs to look. In an older home around Felpham, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
What you get with us
- We never seal over old sealant
- Experience in homes, commercial sites and hotels
- An ARBOMaster approved applicator
- You choose the colour before work begins
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Outside joints around Felpham
Felpham is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For site and facilities teams at buildings such as Felpham Community College, larger buildings have long runs of movement joint that eventually need resealing. In the older streets around Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Felpham is about 1 mile east of Bognor Regis, in West Sussex. Homes, rented property, offices and hotels in Felpham can book us for gutter sealing. Every job comes with our 12-month guarantee. Felpham is one of 371 towns and villages in West Sussex we cover for gutter sealing. There’s also a page for Portsmouth, roughly 19 miles from Felpham.
Postcode districts we cover here for gutter sealing: PO22 and PO21. Gutter sealing is available to properties on Sea Road, Ley Road and Limmer Lane. We also cover the places around Felpham: South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). We also work in nearby towns such as Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Emsworth (13 miles west).
Local landmarks in Felpham
We work in homes and buildings around The Brooks Local Nature Reserve, The Thatched House and Downview Primary School and the streets around them. Felpham’s nearest station is Bognor Regis station, roughly 1 mile west. Other landmarks nearby include Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Get leaks sealed before the wet months
- Check that water runs out of the downpipes
- Glance at the soffit joints now and then
- Watch the wall under the gutters for staining
Leave the new sealant to cure as we advise before poking or cleaning near it.
Once roofline sealant splits, water can get behind it. Resealing early protects the boards.
How the job changes by surface
Gutter joints
A gutter joint has to cope with movement and standing water. A gutter sealant made for the job holds best.
uPVC fascias
We seal fascia joints, not replace the boards. If boards are damaged, we will tell you.