West Sussex · England
Gutter Sealing in Lancing
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Lancing, backed by a 12-month guarantee. Ask us for a quote.
- Drips from gutter joints and end caps
- Streaks down the brickwork from a leaking joint
- Old sealant on roofline trims that has split
How we handle gutter sealing in Lancing
Across Lancing, we reseal gutter joints, end caps and roofline trims. Low-level work is straightforward, and for higher work, tell us about access and we’ll confirm what’s needed. We work on soffit joints, gutter end caps and uPVC fascias, and people most often call us about damp patches inside below a leaking gutter and cracked sealant along roofline trims.
Outbuildings, garages and conservatories around homes in places like Lancing add more joints to look after. Leaks generally start at a gutter end, a garage door frame or where an extension meets the house.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Lancing (BN15)
- Region
- West Sussex
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need gutter sealing in Lancing
Roofline sealant ages in sun and rain. It goes hard, cracks and pulls away after some years.
The most common problems we see are:
- Leaking gutter joints and stop ends
- Earlier gutter repairs that have peeled off
- Failed sealant on a garage door frame
- Dripping gutter ends
Letting a property close to Lancing station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
What your quote should include
- How the surfaces are prepared before sealing
- How hidden problems are handled
- Who turns up on the day
- Whether they seal over old material or remove it
Nearby places to Lancing
What else we do in Lancing
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, depending on the number of joints and the access for a typical job. A visit to Lancing is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we agree which joints need sealing.
- We clean out each joint.
- We make sure everything is dry.
- The sealant is applied and finished.
- The joints are checked once sealed.
How to prepare
- Keep children and pets away from the work area
- Mention any tricky access
- Mention any leaks or damp you’ve noticed
Ask for a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or drop us an email.
Read more
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Watch for drips in a downpour
- Check that water runs out of the downpipes
- Look for streaks or damp on the wall below gutters
- Get leaks sealed before the wet months
Make sure downpipes are not blocked, so water can get away. A blocked pipe backs water up to the joints.
Rain getting in round a garage door frame can damage what’s stored inside. A reseal sorts it.
Honest limits
It helps to know what we cannot do too:
- Downpipes that are blocked or broken
- Fascias that need replacing
- Guttering that needs replacing
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before booking.
Where we work in Lancing
- Gutter joints
- Roofline trims
- uPVC fascias
- Gutter end caps
- Garage door frames
- Soffit joints
Outside joints around Lancing
Lancing is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Schools such as The Globe Primary Academy are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around St. Michael & All Angels, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Lancing is about 3 miles east of Worthing, in West Sussex. We provide gutter sealing to homes and businesses in Lancing. Lancing is one of 371 towns and villages in West Sussex we cover. Brighton is on our list too, about 8 miles from Lancing.
Here we cover the BN15 postcode area for gutter sealing. You will find streets such as North Road, North Farm Road and Addison Close, and we cover them all. Lancing sits on or near the A2025, which makes travel easy. If you’re just outside Lancing, we cover Sompting (1 mile west), East Worthing (2 miles south-west), Broadwater (2 miles west), Offington (3 miles west) and Botolphs (3 miles north). Within a short drive, we also cover Worthing (3 miles west), Haywards Heath (15 miles north-east), Burgess Hill (12 miles north-east), Littlehampton (9 miles west), Rustington (8 miles west) and Storrington (8 miles north-west).
Local landmarks in Lancing
In Lancing, that means homes and buildings near Brooklands Park, Sompting Abbotts Preparatory School and The Railway pub. There’s a railway station in Lancing itself: Lancing station. Well-known places in the area include Worthing Hospital (2 miles south-west) and Old Castle (3.1 miles west). Not far away are Lancing Ring and Widewater Lagoon.
Surface by surface
Soffit joints
Gaps at soffit joints can let in draughts and insects. We close them with a suitable sealant.
Gutter joints
A gutter joint has to cope with movement and standing water. A gutter sealant made for the job holds best.
What happens if it’s left?
Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. Homes in smaller places like Lancing can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- 20+ years of sealant experience
- Quality sealants from Arbo and Everbuild
- White, clear, grey or coloured to suit, where the product allows
- Experience in homes, commercial sites and hotels
See our cost guide and customer reviews.
Questions from Lancing
Do you work for landlords with property near Lancing station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
Is gutter sealing in a coastal place like Lancing any different?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator.
Will sealant fix a dripping gutter joint?
In many cases, yes. A clean, dry joint resealed with gutter sealant normally stops the drip. If the section is split or warped, it needs replacing.
How long will you be here?
Typically it takes a few hours, depending on the number of joints and the access. Bigger jobs take longer.
Do you work in Lancing?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland, and that includes Lancing.
Do you replace gutters or fascias?
No. We seal joints; replacing gutters and fascias needs a gutter or roofline installer.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.