West Sussex · England
New-build mastic & snagging in Felpham, West Sussex
New-build sealant joints in Felpham need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Messy sealant that spoils new finishes
- Cracks appearing as a new home settles
- Second-fix sealing on new plots
New build mastic for homes and businesses in Felpham
Snagging sealant properly means taking the failed bead out completely. New silicone won’t bond to old silicone, so the joint is cut out, cleaned, dried and resealed. If you have leaking shower tray seals in a new home and internal frame sealant that has split, we can help, on bathrooms & en suites, show homes and kitchens alike.
Homes around Felpham range from older cottages to newer houses, and their floors range just as widely, each moving in its own way. The sealant at skirtings and thresholds has to suit the floor it meets.
All our work is covered by our 12-month guarantee.
- Location
- Felpham (PO22, PO21)
- Region
- West Sussex
- Cover
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Quotes for new build mastic in Felpham
Every job gets its own quote. This is what makes a difference:
- When we can work, for business premises
- Whether the work is at height
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
What to tell us for a quote
When you contact us, these details help:
- Roughly how big the job is
- A few pictures by email, if you can
- Whether it has been sealed before
- How we’d reach the joints
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours in a single home, including the tidy-up. For a job in Felpham, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- The failed sealant is removed completely, with no layer left behind.
- We clean out the dust and grit left from the build.
- We prime where needed and apply a sealant suited to each joint.
- Each bead is tooled and the cure times explained.
Preparing for the visit
- Mention any tricky access
- Tell us about any previous sealing or DIY attempts
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Advice
Nearby places to Felpham
Other services in Felpham
New homes and floors in Felpham
Felpham is within about 1 mile of the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Around Felpham, as everywhere, new build mastic is only as good as the preparation behind it. For new homes near Bognor Regis station, it’s worth checking the sealant early, while snags are still fresh.
Felpham is about 1 mile east of Bognor Regis, in West Sussex. We provide new build mastic to homes and businesses in Felpham and the surrounding area. Across West Sussex, we cover 371 places, Felpham among them. For nearby work, see our Portsmouth page (19 miles or so).
Jobs for new build mastic in PO22 and PO21 is quoted and booked the same way as anywhere else. You’ll find streets such as Sea Road, Ley Road and Limmer Lane, all of which we cover. We also cover South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). Further out, we also cover Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Emsworth (13 miles west).
Landmarks near Felpham
Around Felpham, our work takes us to homes and buildings near The Brooks Local Nature Reserve, The Thatched House and Downview Primary School, among other places. For rail, the closest station is Bognor Regis station, about 1 mile west. Other landmarks nearby include Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).
Your questions about new build mastic in Felpham
Is Felpham in your area for new build mastic?
Yes. Our work covers London and the South East, and Felpham is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing.
Will you come out to Felpham?
Yes, Felpham is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
What information do you need?
A short description and the location. We’ll ask anything else we need to know.
Is it normal for sealant to crack in a new home?
It’s common, and there are usually two reasons: the house moving as it dries, and sealant that never bonded properly. Cutting it out and resealing properly fixes both.
Do you take on second-fix sealing for builders?
Yes. Plot mastic and second-fix sealing for developers is part of our work. Send us the plot schedule and we’ll quote.
When is the best time to reseal in a new build?
Any seal that is leaking should be redone right away. For small cosmetic gaps, waiting until the house has settled can save doing them twice.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
When something else is needed
Sealant isn’t the answer to every problem, and we’ll tell you before work begins. Sealant won’t put right:
- Structural cracks in walls or ceilings
- Baths and trays that move too much for sealant to cope with
- Leaks from pipes, valves or wastes, which need a plumber
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Where we work in Felpham
- Bathrooms & en suites
- Plot handovers
- Show homes
- Kitchens
- Windows & doors
- Skirting & floors
How the job changes by surface
Skirting and floors
Gaps under skirting are one of the most common new-build snags. We seal it with a flexible sealant that copes with the movement.
Show homes
In a show home, the sealant is on display. We lay neat, even beads in colours to suit the finishes.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A DIY attempt does not rule out a professional job. We cut it out and start again.
What happens if it’s left?
For developers, getting the sealant right first time saves return visits. Snagging visits for failed sealant cost time on every plot, and they’re avoidable with good preparation. In an older home around Felpham, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- Anti-fungal silicone where joints get wet
- Homes, businesses and hotels
- Colour agreed with you before work begins
How to look after the new joints
To keep the joints looking good and working properly:
- Record problems with dated photos
- Keep water off fresh sealant until it has cured
- Use the extractor fan every time you shower
- Look at the sealant regularly in the first couple of years
Keep the bathroom ventilated, especially in the first year. Use the extractor fan or open a window after showers so moisture doesn’t sit on the sealant.
Mould takes hold quickly in sealant that has gaps or lifted edges. Resealing before mould gets in saves a harder job later.