Hampshire · England
Soldridge Glazing Silicone
We cover Soldridge for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.
- Silicone pulling away from the glass
- A quick top-up bead that didn’t last
- Water getting into a conservatory at the joints
Common problems we fix in Soldridge
Not every leak is a sealant problem: failed roof panels, slipped glazing bars and blocked gutters cause them too. We find the cause before we seal anything.
Common reasons people contact us include:
- Failed sealant around rooflight glass
- Failed joints on frameless glass
- Split or lifting silicone on glass
- New silicone smeared over old sealant
In and around Soldridge, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.
What to look for in a quote
- What happens if the job turns out different
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared
- Which colour the sealant will be
Glazing silicone in Soldridge
We renew glazing silicone on conservatories, rooflights and glass panels plus shower screens and the bases of glass balustrades. Each joint is cut out, cleaned and resealed. If you’re dealing with rooflight joints letting water in and leaks where conservatory glass meets the frame, we can help, whatever the surface.
Homes in small places like Soldridge often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.
All of our work is guaranteed for twelve months.
- Place
- Soldridge (GU34)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Check the gutters above the glazing for debris
- Keep harsh solvents off the silicone
- Keep air moving in the conservatory
- Do not leave a drip for the next storm
Use mild cleaners on and around the silicone. Harsh solvents may damage the bead.
Don’t leave lifting or mouldy silicone on glazing. Once it starts to peel, water gets behind it and the problem grows.
What we do, step by step
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the work takes a few hours for most jobs for a typical job. In a small place like Soldridge, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Advice
FAQs for Soldridge
Is Soldridge in your area for glazing silicone?
Yes. We work across London and the South East, and Soldridge is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Soldridge?
Yes. Soldridge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long should I leave it?
Cure times vary by product and the conditions. Before we leave, we will tell you the cure time.
How do I get a quote for glazing silicone in Soldridge?
It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or email us and let us know what needs doing and where.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in.
Do you fit new glass or sealed units?
Glass replacement isn’t our trade. We reseal the joints around it and can tell you if a unit seems to have gone.
For landlords and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
If you manage several properties in or around Soldridge, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Why deal with it now?
Replacing a conservatory roof is major work. Where the water is getting in through sealant renewing the joint is the simpler fix. If the roof is the problem, we’ll say so. Around Soldridge, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- Rated 4.9 stars on Google
- We never seal over old sealant
- You choose the colour before work begins
- Arbo and Everbuild products
Take a look at what affects the cost or what customers say.
What sealant work cannot fix
New sealant cannot fix everything, and we will tell you before we start. Sealant will not put right:
- Glass that needs replacing
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- Frames that have decayed or split
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly.
Joints and surfaces we work on
- Shower screens
- Conservatory frames
- Rooflights
- Glass-to-frame joints
- Glass-to-glass joints
- Glass balustrade bases
Windows and doors in Soldridge
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Bentworth Hall (about 2.8 miles north) are a reminder that the area around Soldridge has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
In the older streets around Church of the Good Shepherd, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Soldridge is about 5 miles south-west of Alton, in Hampshire. Across the GU34 area, we can carry out glazing silicone at your property. Our Hampshire coverage runs to 683 places, and Soldridge is one of them. For nearby work, see our Southampton page.
We work across GU34 for glazing silicone. You will find streets such as Upper Soldridge Road, Rookwood Lane and Soldridge Road. We also cover the places around Soldridge: Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). Larger places within reach include Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
Local landmarks in Soldridge
Nearby you will also find Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). The countryside around Soldridge includes Red Hill.
Towns and villages near Soldridge
More services for Soldridge
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.