Hampshire · England
Gutter, fascia & soffit sealing in Soldridge, Hampshire
Gutter sealing across Soldridge and nearby, with old sealant always removed completely and a one-year guarantee.
- Drips from gutter joints and end caps
- Water running down the wall below the gutter
- Failed sealant on a garage door frame
Why act early in Soldridge
A bead squeezed onto a wet joint might hold for a while, but it soon lets go. Proper preparation is the difference. In a small place like Soldridge, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why choose Mr Mastic in Soldridge
- ARBOMaster approved applicator
- A choice of colours where the product allows
- Colour picked to suit the job
- Homes, businesses and hotels
Gutter sealing in Soldridge, done properly
We do not replace gutters, fascias or roofs. What sealant does is close joints; it will not fix a broken bracket, a cracked section or a blocked downpipe. We work on garage door frames, gutter joints and gutter end caps, and the jobs we see most are water dripping where gutter sections meet and old sealant on roofline trims that has split.
In a village or hamlet like Soldridge, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or drop us an email.
- Place
- Soldridge (GU34)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Places near Soldridge
Also in Soldridge
Signs you need gutter sealing in Soldridge
Gutter joints rely on seals that age. Sun and cold make the gutter expand and contract and that movement opens up tired joints.
The most common problems we see are:
- Open joints in fascias and soffits
- Dripping gutter ends
- Rain getting in around a garage door
- Quick sealant fixes on gutters that didn’t last
In and around Soldridge, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
What your quote should include
- What product goes in the joint
- How hidden problems are handled
- Whether they seal over old material or remove it
- The length of the guarantee
Soldridge questions
Will you come out to Soldridge?
Yes. Soldridge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Soldridge in your area for gutter sealing?
Yes, Soldridge is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Where are you based?
We’re a Crawley-based firm. Our area covers South East England, London and Scotland.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
Do you clean gutters?
The joints we seal are cleaned out and any debris nearby is cleared. A full gutter clean is a separate service.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used.
How long does the job take?
Typically it takes a few hours, depending on the number of joints and the access. Bigger jobs take longer, and we will tell you how long to expect.
Is it OK to seal over old sealant?
No, because it fails. The old sealant always comes out first.
Outside joints around Soldridge
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Bentworth Hall (about 2.8 miles north) are a reminder that the area around Soldridge has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
If you live in an older home near Church of the Good Shepherd, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Soldridge is about 5 miles south-west of Alton, in Hampshire. Our applicators cover gutter sealing for homes and businesses in Soldridge. Across Hampshire, we cover 683 places, and Soldridge is one of them. Our Southampton page covers work nearby (19 miles or so).
Postcode districts we cover here for gutter sealing: GU34. Whether your property is on Upper Soldridge Road, Rookwood Lane and Soldridge Road or a nearby road, our applicators can take on the job. If you are just outside Soldridge, we cover Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). Further out, we also cover Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
Local landmarks in Soldridge
A little further out are Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). Not far away are Red Hill.
When it isn’t the sealant
It helps to know what we can’t do too:
- Guttering that needs replacing
- Boards that have decayed or split
- Blocked downpipes
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Roofline trims
- uPVC fascias
- Gutter end caps
- Garage door frames
- Gutter joints
- Soffit joints
Landlords, agents and businesses in Soldridge
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes an hour or two for a few joints, longer for a full run, and the area is left clean. Somewhere as small as Soldridge, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- The sealant is applied and finished.
- We check our work before we leave.
Before we arrive
- Move anything stored near the joints
- Mention any tricky access
- Tell us if parking is tricky
Get a quote
If you are in Soldridge and need gutter sealing, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
DIY sealant or a professional job?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Rest ladders on the wall, not the gutter
- Watch for drips in a downpour
- Clear leaves and moss from the gutters
- Glance at the soffit joints now and then
Look at fascia and trim joints when you are checking the gutters. Splits are easier to seal early.
If an end cap is dripping, deal with it before winter. Water down the wall all winter can cause damp inside.