Hampshire · England
Soldridge Fire Rated Sealant
Professional fire rated sealant in and around Soldridge, with old sealant always removed completely.
- Seals cut through by electricians, plumbers or data installers
- Ordinary sealant used where a fire-rated product was needed
- Old fire sealant that has split or come away
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
How we handle fire rated sealant in Soldridge
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. Each gap is sealed to the product maker’s tested detail for its size and substrate. Typical jobs include gaps flagged on a fire risk assessment and damaged fire sealant left by other trades, on flats & HMOs, door frames and plasterboard & masonry.
If you have holiday lets, a converted barn used for business or a community building near Soldridge, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Big or small, it’s backed by our one-year guarantee in Soldridge and across Hampshire.
- Location
- Soldridge (GU34)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Soldridge
If you manage several properties in or around Soldridge, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too in Soldridge and across Hampshire. We can quote a run of properties together.
Places near Soldridge
What else we do in Soldridge
Different surfaces, different methods
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the seal has something sound to bond to.
Your questions about fire rated sealant in Soldridge
What guarantee comes with fire rated sealant in Soldridge?
Every job comes with our one-year guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
Do you cover Soldridge for fire rated sealant?
Yes. Our work covers London and the South East, and Soldridge is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
How much does fire rated sealant cost in Soldridge?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or drop us an email and tell us what needs doing and where.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
What fire rating will the seal have?
We do not give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we apply a product tested for it, recording the locations and products.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. If it’s been used, we remove it and use the right product.
Do you take on fire stopping in schools and offices?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
Will we have a record of what was sealed?
Yes. Every gap we seal is listed with the product used, so you have it on file.
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours for a handful of gaps, and longer for a whole building. In a small place like Soldridge, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
How to get a quote
If you are in Soldridge and need fire rated sealant, ring 0345 464 0079 or email us. Tell us what the problem is and where, and we will agree the price before any work begins.
Read more
When something else is needed
It helps to know what we can’t do too:
- Fire risk assessments, which need a qualified assessor
- Certifying a building or signing off its fire safety
- Big openings where sealant alone is not the tested solution
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
What we seal
- Door frames
- Plasterboard & masonry
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
Commercial buildings in Soldridge
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
In and around Soldridge, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. For buildings such as Church of the Good Shepherd, service openings in its walls need the right fire-rated sealant, as in any building.
Soldridge is about 5 miles south-west of Alton, in Hampshire. Wherever you are in the GU34 postcode area, we cover fire rated sealant for homes and businesses. Across Hampshire, we cover 683 places, and Soldridge is one of them. You can also see our page for Southampton, about 19 miles away.
Here we cover the GU34 postcode area for fire rated sealant. Streets in the area include Upper Soldridge Road, Rookwood Lane and Soldridge Road, and we cover them all. If you’re just outside Soldridge, we cover Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). We also work in nearby towns such as Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
What’s near Soldridge
Nearby you will also find Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). Green spaces nearby include Red Hill.
Why deal with it now?
A quick fill with any sealant to hand is not fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. Where a wall is exposed, as many are in small places like Soldridge, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Combining jobs into one visit is usually more efficient than separate visits. You will get one clear quote for the whole job.
Why book with us
- A 12-month guarantee on all work
- Tidy, careful work
- Full insurance on every job
- Anti-fungal silicone where joints get wet
Take a look at how sealant jobs are priced or our reviews.
Quotes for fire rated sealant in Soldridge
We quote each job individually. This is what makes a difference:
- The product the joint needs
- Whether the work is at height
- The number of rooms or windows
- Mould in or behind the old joints
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
What we need to know
When you contact us, these details help:
- Roughly how big the job is
- The type of property
- Where the property is
- What’s wrong with the joints now
We do not publish a price list. Instead, we send you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.