Hampshire · England
Wivelrod Fire Rated Sealant
Specialist fire rated sealant for Wivelrod: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Holes left by a change of layout
- Unsealed gaps around fire door frames
- Gaps filled with a product that isn’t fire-rated
Fire rated sealant for homes and businesses in Wivelrod
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. Typical jobs include linear gaps at the head of walls and fire stopping disturbed by later work, across linear gaps, door frames and plasterboard & masonry.
Work in a small place like Wivelrod is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
You get a 12-month guarantee, the same in Wivelrod as everywhere else we work.
- Location
- Wivelrod (GU34)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why it’s worth doing now in Wivelrod
Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we will tell you. Around Wivelrod, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Why Wivelrod clients choose us
- Experience in homes, commercial sites and hotels
- Full insurance on every job
- Every job guaranteed for a year
- Anti-fungal sanitary silicone in wet areas
Read how sealant jobs are priced and customer reviews.
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Report cracked or damaged seals as soon as you notice them
- Allow for resealing whenever new services are run
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Don’t paint over fire sealant until it has cured
Do not drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
Fire rated sealant in Wivelrod: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Community buildings like Chapel of Alton Abbey are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Wivelrod is about 3 miles west of Alton, in Hampshire. From the centre of Wivelrod to the outskirts, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Wivelrod is one of 683 places in Hampshire where we work for fire rated sealant. There’s also a page for Reading, roughly 21 miles from Wivelrod.
Postcode districts we cover here for fire rated sealant: GU34. Nearby, we also carry out fire rated sealant in Thedden (1 mile north-east), Beech (1 mile east), Holt End (1 mile north-west), New Copse (1 mile west) and Bentworth (1 mile north-west). Larger places within reach include Basingstoke (9 miles north), Winchester (13 miles south-west), Fleet (13 miles north-east), Aldershot (14 miles north-east), Alton (3 miles east) and Petersfield (10 miles south-east).
Landmarks near Wivelrod
The nearest railway station is Alton station, roughly 3 miles east of the centre. Other landmarks nearby include Barton Castle (3.5 miles west) and Alton Community Hospital (2 miles east). Not far away are King's Hill.
Honest limits
Before booking, it’s worth knowing the limits too:
- Certifying a building or signing off its fire safety
- Assessing a building’s fire safety
- A wall that is not a fire-resisting element to begin with
If in doubt, call 0345 464 0079 or email us and we’ll say what we think.
Joints and surfaces we work on
- Plasterboard & masonry
- Linear gaps
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
Common questions in Wivelrod
Can you help a landlord with a rental near Alton station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
Is Wivelrod in your area for fire rated sealant?
Yes, Wivelrod is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
Can you seal over the old sealant?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What the job involves on each surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist.
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
What we are called out for in Wivelrod
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole round the new service is not always sealed again.
It’s worth asking for a quote if you see:
- Sealant items on a fire risk assessment action list
- Cracked or shrunken fire-rated sealant
- Gaps where walls meet ceilings or slabs
- Door frames with gaps between frame and wall
Letting a property close to Alton station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
What to look for in a quote
- What insurance they hold
- Is the old sealant removed completely?
- What the quote includes, VAT included or not
- When the joint can take water or movement
More services for Wivelrod
The process
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes a few hours for a handful of gaps, and longer for a whole building from start to finish. Somewhere like Wivelrod needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
Get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or drop us an email.