Dundee · Scotland
Logie Glazing Silicone
Glazing silicone for conservatories, rooflights, glass panels and shower screens for Logie, backed by a one-year guarantee. Call for a quick quote.
- Black or yellowed silicone on glass joints
- New silicone smeared over old sealant
- Glass-to-glass joints that have split
Why deal with it now?
Dealing with a leaking shower screen early protects the floor and ceiling. A small leak can reach the floor below before you notice. Wind-driven rain gets into any failed joint on the outside of a city building, and in Logie, damp can spread through stone and plaster before anyone sees it.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and agree the price before starting.
Why Logie clients choose us
- An ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
- Tidy, careful work
- Full insurance on every job
Read what affects the cost and what customers say.
Glazing silicone for homes and businesses in Logie
Glazing silicone that has yellowed, blackened or come away spoils the look and lets water in. We remove it without scratching the glass or frame before the new bead goes in. Common call-outs are for silicone pulling away from the glass and new silicone smeared over old sealant, on glass-to-glass joints, shower screens and glass balustrade bases.
In a Scottish city, many flats have windows two, three or four floors up, so the mastic outside can go unchecked for years. Access is the first thing to plan for a job in Logie.
Each job carries a 12-month guarantee.
- Location
- Logie (DD2, DD1, DD3)
- Wider area
- Dundee
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
How the job changes by surface
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We renew it with a clear or matching glazing silicone.
Glass balustrade bases
The base of a glass balustrade is normally sealed. Failed sealant there lets water collect.
When to call us in Logie
New silicone over old silicone won’t bond. Many failed joints we see have been topped up rather than cut out leaving a path for water.
If you can see any of these, it’s time to have the joints looked at:
- Water tracking down the inner face of the glass
- Mouldy sealant around glass panels
- Water getting into a conservatory at the joints
- Failed sealant around rooflight glass
Historic houses such as Camperdown House, about 2.2 miles north-west, show how far back building around Logie goes, and older homes nearby need a sealant that suits their walls.
What to look for in a quote
- What preparation is included
- What the cure time is
- What happens if the job turns out different
- Whether VAT is included
Frames and glazing around Logie
Logie is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on glazing joints and frame seals, especially on the side facing the sea. Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.
If you look after a building such as Harris Academy, its window and door frames need their mastic kept sound, just like a home’s. Letting a property close to Dundee station? Then a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
Logie is about 1 mile south-west of Dundee, in Dundee. From the centre of Logie to the outskirts, glazing silicone is available for homes and businesses alike, from flats and houses to offices and hotels. Logie is one of 50 places in Dundee we cover.
Postcode districts we cover here for glazing silicone: DD2, DD1 and DD3. Streets in the area include City Road, Ancrum Road and Tait's Lane, all of which we cover. Other places close to Logie include Balgay (1 mile north-west), Lochee (1 mile north), Menzieshill (1 mile west), Dryburgh (1 mile north-west) and Ninewells (1 mile west). Within a short drive, we also cover Broughty Ferry (5 miles east), Monifieth (7 miles east), Barnhill (6 miles east), Pitkerro (3 miles north-east), Whitfield (3 miles north-east) and Douglas (4 miles east). Being one of Dundee’s larger places, Logie has every kind of property, from flats to offices.
Near you in Logie
Around Logie, our work takes us to homes and buildings near Dundee School of Architecture, The Hawkhill Tavern and Balgay Hill. The closest station to Logie is Dundee station, roughly 1.3 miles east of the centre. Well-known places in the area include Dudhope Castle (0.7 miles east) and Tayside Medical History Museum (within half a mile east). Not far away are Balgay Hill and Trottick Mill Ponds.
Honest limits
We will not take on work that won’t last, so here’s what sealant can’t put right:
- A frame that needs repairing or replacing
- Leaks from the roof covering or flashing (a roofer’s job)
- A broken pane or roof panel
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Shower screens
- Rooflights
- Glass-to-glass joints
- Conservatory frames
- Glass-to-frame joints
- Glass balustrade bases
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Logie and across Dundee. Several sites can go on one quote, and we are fully insured for the work.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll quote.
Nearby places to Logie
More services for Logie
Quotes for glazing silicone in Logie
The quote reflects the job in front of us. We look at:
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Access and height
- How much there is to do
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
What to tell us for a quote
To make quoting easier, please include:
- Where the property is
- Whether it has been sealed before
- What’s wrong with the joints now
- Photos by email, if that’s easy
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear quote before we start.
Your questions about glazing silicone in Logie
Who arranges sealant work on the shared parts of a tenement in Logie?
The owners of the flats normally agree repairs to shared parts like the roof and outside walls, and many buildings have a factor to arrange it. Where the title deeds are silent, the Tenements (Scotland) Act 2004 fills the gaps. Your title deeds will say who owns the windows.
Is glazing silicone in a coastal place like Logie any different?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Can you just put new silicone over the old?
It does not last. Fresh silicone will not bond to cured silicone, so we remove the old sealant and clean the joint.
Is the work guaranteed?
Every job comes with our 12-month guarantee, and we are fully insured.
Can I choose the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.
Do you seal glass balustrade bases?
Yes, where the base is finished with sealant. Photos help us see what’s there when you drop us a line at info@mrmastic.co.uk.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
What should I tell you?
Tell us what needs doing and where. We will ask anything else we need to know.
The process
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours, depending on how many joints need doing. In a city area like Logie, parking may be by permit or pay-and-display, so tell us what’s nearby. If you are in a flat, let us know how we get in at the street door.
- We look at the glazing and agree which joints need resealing.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- We inspect the work and test it where we can.
Before we arrive
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
Ask for a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will talk you through the work before giving you a price.