Scottish Borders · Scotland
Glazing Silicone in Ettrickbridge
Specialist glazing silicone for Ettrickbridge: careful preparation, the right product and tidy work. Call for a quick quote.
- A quick top-up bead that didn’t last
- Mouldy sealant around glass panels
- Failed joints on frameless glass
Glazing silicone in Ettrickbridge
Glass replacement is not something we do, and misting between panes means a failed sealed unit. What we do is the silicone around the glass and that’s often where the water gets in. We are often asked to deal with water getting into a conservatory at the joints and cracked silicone between glass panels, on glass-to-glass joints, conservatory frames and shower screens.
Older stone-built homes in Scotland often have sash and case or timber windows set in stone. Those suit a traditional sand mastic or a neutral-cure sealant, not an acetoxy silicone that can attack some stone.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Ettrickbridge (TD7)
- Wider area
- Scottish Borders
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
When something else is needed
Before booking, it’s worth knowing the limits:
- Rotten or badly damaged frames
- A broken pane or roof panel
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
Surfaces we seal
- Glass-to-glass joints
- Rooflights
- Glass balustrade bases
- Conservatory frames
- Glass-to-frame joints
- Shower screens
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes anything from an hour or two to most of a day, depending on the size of the job. For a place like Ettrickbridge, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
How to prepare
- Mention any parking rules near the property
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.
Advice
Leave it or put it right?
Replacing a conservatory roof is major work. If the leak is a failed sealant joint renewing the joint is the simpler fix. If it’s the roof itself, we will tell you. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear price before work begins.
Why choose Mr Mastic in Ettrickbridge
- Quality sealants from Arbo and Everbuild
- Sanitary silicone with an anti-fungal additive in wet areas
- A sealant colour to suit the surroundings
- Over 20 years’ experience
Take a look at what affects the cost and our reviews.
Places near Ettrickbridge
Other services in Ettrickbridge
Ettrickbridge: your questions answered
Is Ettrickbridge in your area for glazing silicone?
Yes. Our work covers the whole of Scotland, and Ettrickbridge is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.
Will you come out to Ettrickbridge?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.
How much does glazing silicone cost in Ettrickbridge?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Is it messy?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Can you reseal the base of a glass balustrade?
We can. The old sealant is removed and the joint resealed with a suitable product.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Can you replace a misted double-glazed unit?
No. Misting between panes means the sealed unit has failed, and a glazier needs to replace it.
What affects the cost of glazing silicone
Call for a quick quote. The main things that affect it are:
- The number of rooms or windows
- The amount of work
- The type of sealant required
- Access and height
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
What to tell us when you ask for a quote:
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
We quote each job on its own, so the first step is telling us about yours. Simply drop us a line at info@mrmastic.co.uk and describe the job.
What glazing silicone looks like in Ettrickbridge
Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.
Around Ettrickbridge, as everywhere, glazing silicone is only as good as the preparation behind it.
Ettrickbridge is about 9 miles north-west of Hawick, in the Scottish Borders. Across the TD7 area, we cover glazing silicone for homes and businesses. Our the Scottish Borders coverage runs to 89 places, Ettrickbridge among them. We also work in Edinburgh, around 31 miles away.
Here we cover the TD7 postcode area for glazing silicone. Ettrickbridge sits on or near the B7009. We also cover the places around Ettrickbridge: Yarrowford (4 miles north), Broadmeadows (4 miles north), Woll (5 miles east), Ashkirk (5 miles east) and Selkirk (6 miles north-east). Larger places within reach include Galashiels (10 miles north-east), Hawick (9 miles south-east), Peebles (13 miles north-west), Wilton (9 miles south-east), Innerleithen (8 miles north-west) and Melrose (11 miles north-east).
Around Ettrickbridge
Not far away are Akermoor Loch.
Signs you need glazing silicone in Ettrickbridge
Sunlight breaks sealant down and roof joints get the most sun. Old silicone hardens, cracks and loses its grip on the glass.
Look out for these signs:
- Water running down inside the glass
- New silicone smeared over old sealant
- Glass-to-glass joints that have split
- Rooflight joints letting water in
In the older streets around Ettrickbridge Church, the joint between an old wall and a newer frame is usually the first place rain gets in.
Comparing quotes
- Who turns up on the day
- What insurance they hold
- What happens if the job turns out different
- What product goes in the joint
For landlords and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.