Orkney Islands · Scotland
Glazing Silicone in Broughtown
Glazing silicone across Broughtown and nearby, with old sealant always removed completely and a 12-month guarantee.
- Water getting into a conservatory at the joints
- Leaks from the base of a shower screen
- Sealant that was laid over old silicone and failed
Glazing silicone in Broughtown, done properly
Glazing silicone that has yellowed, blackened or come away looks poor and can leak. It comes off cleanly, without marking the glass before the new bead goes in. We work on glass-to-frame joints, rooflights and glass-to-glass joints, and the jobs we see most are shower screens leaking along the wall or tray and water getting into a conservatory at the joints.
In and around a place like Broughtown, homes range from older stone-built cottages to newer houses. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.
There’s a 12-month guarantee on every job.
- Where
- Broughtown (KW17)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- A sagging or failing conservatory roof
- A broken pane or roof panel
- Failed flashing around a conservatory
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Rooflights
- Glass balustrade bases
- Glass-to-glass joints
- Shower screens
- Conservatory frames
- Glass-to-frame joints
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Windows and doors in Broughtown
Broughtown is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. On the islands, wind and salt spray are hard on outside sealant.
Whether the job is in Broughtown itself or nearby, the right material for each joint matters as much as a neat finish. In and around Broughtown, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.
Broughtown is about 23 miles north-east of Kirkwall, in the Orkney Islands. If you need glazing silicone in Broughtown, please drop us a line at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover the Orkney Islands, Broughtown included. 51 places in the Orkney Islands are on our list.
Work in KW17 is quoted and booked the same way as anywhere else. Other places close to Broughtown include Lady (2 miles east), Wardhill (10 miles south), Pierowall (14 miles west), Rackwick (14 miles west) and Brinian (16 miles south-west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Broughtown
Other landmarks nearby include Warsetter Farm Museum (1.8 miles south-east). The countryside around Broughtown includes Bea Loch.
Your questions about glazing silicone in Broughtown
Is Broughtown in your area for glazing silicone?
Yes. We work across all of Scotland, and Broughtown is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we will send you a clear quote.
Will you come out to Broughtown?
Yes, smaller places are covered as well as towns. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
How much does glazing silicone cost in Broughtown?
It depends on the job, so we quote each one individually. For a quick quote, email us at info@mrmastic.co.uk with a short description of the job.
Is it possible to redo the silicone on a shower screen?
Yes. The old bead comes off without marking the glass, and the joints are cleaned and resealed.
Will resealing stop my conservatory leaking?
In many cases, as long as sealant is the cause. We find where the water gets in first before any sealing.
What guarantee do I get?
Our one-year guarantee covers every job, glazing sealant included.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
What do you need from me for a quote?
A short description and the location, plus photos if you have them. We will ask anything else we need to know.
Why deal with it now?
Leaks get worse, not better. Water can damage frames, walls, flooring and furniture so early action saves a bigger repair. Around Broughtown, water from a failed joint in an older stone home can soak into timber and plaster.
What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Broughtown
- White, clear, grey or coloured to suit, where the product allows
- Approved under the ARBOMaster scheme
- Trusted Arbo and Everbuild sealants
- Rated 4.9 stars on Google
Take a look at our cost guide or our reviews.
Surface by surface
Rooflights
Rooflights get the full force of the weather. The sealant around the glass and frame wears faster than most.
Glass-to-glass joints
Where two panes meet, the silicone joint takes all the movement. It must be clean, neat and well bonded.
The process
When we arrive, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before we start. The work usually takes a few hours, depending on how many joints need doing. Somewhere like Broughtown may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
How to prepare
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
- Plan for the work area to be out of bounds to pets and children
Getting a quote
For glazing silicone in Broughtown, email us at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Read more
What else we do in Broughtown
Landlord and commercial work in Broughtown
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Stick to mild cleaners on glass
- Avoid strong solvents on or near the sealant
- Don’t use a blade near the sealant
- Act on drips or damp patches early
Keep conservatory gutters clear so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we’ll tell you which.