Perth and Kinross · Scotland
Glazing & conservatory sealant in Ardler, Perth and Kinross
Professional glazing silicone in and around Ardler, with old sealant always removed completely.
- Leaks from the base of a shower screen
- Rooflight joints letting water in
- Mouldy sealant around glass panels
About our glazing silicone in Ardler
Our work covers conservatory joints, rooflights and glass panels plus shower screens and the bases of glass balustrades. The old sealant comes out, the joint is cleaned and new silicone goes in. Typical jobs include water tracking down the inner face of the glass and shower screens leaking along the wall or tray, on conservatory frames, shower screens and glass-to-frame joints.
Older stone-built homes in Scotland often have sash and case or timber windows set in stone. The sealant has to suit the stone, which rules out acetoxy silicones that can mark or attack it.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Ardler (PH12)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Leaks from the roof covering or flashing (a roofer’s job)
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- Structural problems with a conservatory roof
If you are not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
What we seal
- Glass balustrade bases
- Glass-to-frame joints
- Shower screens
- Conservatory frames
- Glass-to-glass joints
- Rooflights
Frames and glazing around Ardler
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that. Sash and case windows are common in older Scottish homes, often pointed into the wall with traditional sand mastic.
In the older streets around Ardler Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Ardler is about 6 miles east of Blairgowrie and Rattray, in Perth and Kinross. Our applicators cover glazing silicone for homes and businesses in Ardler. 107 places in Perth and Kinross are on our list, large and small. Dundee is on our list too, around 10 miles away.
We cover every part of the PH12 postcode area for glazing silicone and the streets around it. We cover properties on Main Street, Wallace Street and Cartwright Place and the roads around them. Neighbouring places we cover for glazing silicone include Meigle (2 miles north-east), Newtyle (2 miles east), Markethill (3 miles south-west), Coupar Angus (3 miles south-west) and New Alyth (4 miles north-west). Within a short drive, we also cover Perth (15 miles south-west), Blairgowrie and Rattray (6 miles west), Scone (13 miles south-west), Tulloch (15 miles south-west), Rattray (5 miles west) and Stanley (11 miles south-west).
Landmarks near Ardler
Other landmarks nearby include Belmont Castle (1.7 miles north-east) and Blairgowrie Community Hospital (5.9 miles west). For a walk, there’s Long Loch and Newtyle Hill.
Surface by surface
Shower screens
Frameless screens rely on silicone at the base and wall. We reseal without scratching the glass.
Rooflights
A rooflight faces rain and sun from above. Its sealant ages faster than vertical joints.
How we quote for glazing silicone
You will get a clear quote before we start. It takes into account:
- When we can work, for business premises
- How much there is to do
- The old material and how stubborn it is
- The type of sealant required
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job.
FAQs for Ardler
Is Ardler in your area for glazing silicone?
Yes, Ardler is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear quote.
Is Ardler within the area you cover?
Yes, we do. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is the work guaranteed?
There’s a 12-month guarantee on every job, glazing sealant included.
Where are you based?
We work from Crawley. We cover Ardler and the rest of Perth and Kinross, along with the rest of our area.
Is balustrade sealant something you do?
Yes, we reseal the joint at the base channel. We don’t install or replace the glass.
Do you work for landlords and businesses?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels in Ardler.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Why not top up the existing silicone?
It doesn’t last. Fresh silicone won’t bond to cured silicone so we take it all out and start clean.
How to look after the new joints
To keep the joints looking good and working properly:
- Use a gentle glass cleaner and a soft cloth
- Do not use a blade near the sealant
- Use gentle products around the joints
- Wipe the screen down after showering
Keep conservatory gutters clear so water does not back up against the seals. Overflowing gutters can cause leaks of their own.
Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.
Signs you need glazing silicone in Ardler
Sealant laid over old sealant does not last. Many failed joints we see have been topped up rather than cut out, and water gets between the layers.
If you can see any of these, it’s time to have the joints looked at:
- Split or lifting silicone on glass
- Glass-to-glass joints that have split
- Failed sealant around rooflight glass
- Conservatory leaks at frame and glazing joints
In and around Ardler, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.
What your quote should include
- How the joint is cleaned and prepared
- How the colour is chosen
- What guarantee comes with the work
- Is the old sealant removed completely?
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
How it works
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for most jobs, depending on the amount of work. Somewhere like Ardler may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We find where water is getting in and check whether it’s a sealant joint.
- The old sealant is removed from the glass and frame without scratching them.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- Glazing silicone suited to the joint is applied and tooled.
- We check the joints and, where safe, run water over them.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Let us know if you’ve seen damp or leaks
- Keep pets and children clear of the area while we work
Get a quote
We quote each job on its own, so start by telling us what you need. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.