Kent · England
Floor Joint Sealing in Wickhambreaux
Floor joint sealing in Wickhambreaux from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Grout used at the floor edge instead of sealant
- Worn sealant at door thresholds
- Failed seals where bathroom floors meet baths and panels
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Lift furniture rather than dragging it across joints
- Do not paint over silicone
- Cone off fresh joints until they’re ready
- Look at floor joints each spring
Keep heavy traffic off resealed concrete joints for the cure time we give you. Cone off the area if needed until it’s ready.
A gap under the skirting collects dust and lets draughts through. Sealing it early keeps the room cleaner and stops it getting worse.
Floor joint sealing in Wickhambreaux
Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side so the joint stays neat. Common call-outs are for threshold joints that have opened or worn and perimeter joints in tiled floors filled with grout, across skirting boards, concrete floor joints and tiled floors.
For a small place like Wickhambreaux, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Place
- Wickhambreaux (CT3)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Floor joint sealing around Wickhambreaux
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal.
For site and facilities teams at buildings such as Wickhambreaux Church of England Primary School, entrance and corridor floor joints take a lot of traffic. For buildings such as Church of St Andrew, floor and skirting joints in halls and kitchens wear like any others.
Wickhambreaux is about 4 miles east of Canterbury, in Kent. Anywhere in CT3, our applicators can take on floor joint sealing. Wickhambreaux is one of 922 towns and villages in Kent where we work for floor joint sealing. Chelmsford is on our list too, about 43 miles from Wickhambreaux.
Jobs for floor joint sealing in CT3 is quoted and booked the same way as anywhere else. Whether your property is on The Street, Wickham Court Lane and Seaton Road or a nearby road, our applicators can take on the job. Neighbouring places we cover for floor joint sealing include Seaton (1 mile east), Ickham (1 mile south), Littlebourne (1 mile south-west), Bramling (1 mile south) and Bekesbourne (2 miles south-west). We also work in nearby towns such as Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (14 miles south), Ramsgate (10 miles east) and Broadstairs (12 miles north-east).
Around Wickhambreaux
Locally, jobs take us to homes and businesses close to The Rose Inn and Spires Academy. The nearest railway station is Bekesbourne station, about 2.6 miles south-west. Nearby you will also find Canterbury Castle (4.8 miles west) and St Martins Hospital (3.4 miles west).
How we quote for floor joint sealing
Your quote is based on your job. We look at:
- How many areas need sealing
- The product the joint needs
- The size of the job
- How easy the joints are to reach
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
Helping us quote
Before you ask for a quote, have a think about:
- Any previous sealing or DIY work
- Where the job is, and your postcode
- Pictures of the joints, sent by email
- Roughly how big the job is
Want a quote for floor joint sealing? Please ring 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Signs you need floor joint sealing in Wickhambreaux
A new floor or screed shrinks and settles as it dries. Gaps at the edges appear in the first year or so, and rigid fillers crack.
These are the problems we are asked about most:
- Failed seals where bathroom floors meet baths and panels
- Rigid edge joints in tiled floors
- Gaps opening between the floor and skirting
- Open joints that fill with dirt
If you let a flat or house near Bekesbourne station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
What to look for in a quote
- How the colour is chosen
- What guarantee comes with the work
- Are they insured?
- Whether they seal over old material or remove it
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- Subfloor problems that need a flooring contractor
- Concrete repairs beyond the joint
- A tiled floor that needs relaying
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer before you book.
Surfaces we seal
- Tiled floors
- Skirting boards
- Wet room & bathroom floors
- Commercial floors
- Concrete floor joints
- Thresholds
What happens on the day
We bring everything the job needs with us, so you do not need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours for most rooms, longer for large commercial floors. Somewhere like Wickhambreaux needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- We check the joints and explain the aftercare.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Ask for a quote
Asking for a quote is easy: let us know the job and the location. A few photos by email make the job easier to understand, and we will come back to you with a quote.
Related advice
Why it’s worth doing now in Wickhambreaux
Caulk is quick and cheap, but it cracks where the joint moves or gets wet, so the gap reappears. A flexible sealant stretches instead. Around Wickhambreaux, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Why choose Mr Mastic in Wickhambreaux
- We never seal over old sealant
- Quality sealants from Arbo and Everbuild
- Approved under the ARBOMaster scheme
- Over 20 years’ experience
Read how sealant jobs are priced or our reviews.
Your questions about floor joint sealing in Wickhambreaux
Is Wickhambreaux within the area you cover?
Yes. Wickhambreaux is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do floor joint sealing in Wickhambreaux?
Yes. We work across London and the South East, and Wickhambreaux is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you work on commercial floors?
Yes. Concrete floor joints in warehouses and units are part of our work. The product is chosen for the traffic the floor takes.
My floor grout keeps cracking in a line. Can you help?
Often, yes, at the edges and along suitable lines. The grout is raked out and replaced with a flexible sealant in a colour to suit.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Do you guarantee your work?
Yes. Every job comes with our 12-month guarantee.