Kent · England
Floor Joint Sealing in Staple
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Staple, backed by a 12-month guarantee. Call for a quick quote.
- Cracked grout where a tiled floor needs a movement joint
- Open gaps along the bottom of skirting boards
- Failed seals where bathroom floors meet baths and panels
How we handle floor joint sealing in Staple
Across Staple, we seal floor and skirting joints in homes and businesses. We start by checking the floor type and the joint, because the right sealant depends on both. If you’re dealing with grout cracking in a straight line across a floor and caulk that has cracked where the floor moves, we can put it right, on tiled floors, thresholds and skirting boards alike.
Work in a small place like Staple just needs the journey and access planning, and once on site, the job is the same as anywhere.
All our work comes with our one-year guarantee, wherever you are in Kent.
- Place
- Staple (CT3)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Floor joint sealing around Staple
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Community buildings like Church of St James are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. For landlords with property near Adisham station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Staple is about 7 miles north-west of Deal, in Kent. Anywhere in CT3, our applicators can take on floor joint sealing. We cover 922 towns and villages across Kent, large and small. There’s also a page for Chelmsford, about 47 miles away.
Every address in CT3 is covered for floor joint sealing, from the main roads to the quietest streets. We cover properties on The Street, Rowan Close and School Lane. We also cover Barnsole (1 mile south-east), Twitham (1 mile west), Durlock (1 mile north), Flemings (1 mile east) and Guilton (1 mile north-east). Within a short drive, we also cover Canterbury (8 miles west), Margate (10 miles north-east), Dover (9 miles south), Folkestone (13 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Near you in Staple
Locally, jobs take us to homes and businesses close to The Three Tuns pub and the streets around them. Staple’s nearest station is Adisham station, about 2.9 miles south-west. Nearby you will also find White Mill (3.3 miles east). The countryside around Staple includes Monk's Wall nature reserve.
What the job involves on each surface
Concrete floor joints
Open concrete joints chip at the edges when wheels cross them. Sealing them supports the edges.
Skirting boards
Skirting-to-floor joints are a regular job for us. The old caulk is removed first so the new sealant bonds.
Landlords, agents and businesses in Staple
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The visit itself usually takes a few hours, depending on the length of joint, depending on how much there is to do. For a village or hamlet like Staple, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gap and the floor type and agree the right sealant.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Clear the area around the work
- Let us know about parking restrictions
- Keep children and pets away from the work area
How to get a quote
If you are in Staple and need floor joint sealing, call 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Related advice
Leave it or put it right?
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. Where a wall is exposed, as many are in small places like Staple, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Why us?
- Experience in homes, commercial sites and hotels
- 4.9 on Google from 180+ five-star reviews
- A 12-month guarantee on all work
- Anti-fungal silicone where joints get wet
Take a look at how sealant jobs are priced and our reviews.
What affects the cost of floor joint sealing
Your quote is based on your job. We take into account:
- Any mould that needs treating
- The type of sealant required
- The amount of work
- Whether old sealant or filler has to be cut out
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Asking for a quote
To make quoting easier, let us know:
- Where the property is
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What sealant work can’t fix
It helps to know what we cannot do:
- A tiled floor that needs relaying
- Concrete repairs beyond the joint
- Floors that are uneven or need levelling
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
What we seal
- Commercial floors
- Skirting boards
- Tiled floors
- Wet room & bathroom floors
- Concrete floor joints
- Thresholds
More services for Staple
Your questions about floor joint sealing in Staple
Do you work for landlords with property near Adisham station?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Is Staple within the area you cover?
Yes. Staple is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Do you offer different sealant colours?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before any work starts.
Will I be able to paint over the new joint?
On joints you want to paint, yes. Silicone doesn’t take paint so mention it when you get a quote.
Can you do several jobs on one visit?
Of course. Doing several areas at once is generally more efficient.
What causes gaps between the floor and skirting?
Floors shrink and settle, especially in the first year or two and through the heating season pulls the skirting and floor apart. Rigid fillers split, so we use a flexible sealant.