Kent · England
Sarre Floor Joint Sealing
Problem with your floor joints in Sarre? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Concrete floor joints that have broken down
- Caulk that has cracked where the floor moves
- Cracked grout where a tiled floor needs a movement joint
Why deal with it now?
The right product depends on the floor and the traffic: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. Where a wall is exposed, as many are in small places like Sarre, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What you get with us
- An ARBOMaster approved applicator
- You choose the colour before work begins
- Neat joints and a tidy finish
- Any old sealant cut out fully, not covered over
Take a look at how sealant jobs are priced and customer reviews.
Floor joint sealing for homes and businesses in Sarre
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors in a colour to suit. If you have skirting caulk that keeps splitting and failed seals where bathroom floors meet baths and panels, we can help, whatever the surface.
In a village or hamlet like Sarre, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Each still needs its sealant and floor joints finished properly.
You get a 12-month guarantee, the same in Sarre as everywhere else we work.
- Where
- Sarre (CT7)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
Before we leave, we go over the finished joints with you. The visit itself usually takes a few hours, depending on the length of joint, depending on the size of the job. Somewhere like Sarre needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we check the joint and the floor and agree which sealant suits it.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- The sealant goes in, chosen for the floor and coloured to suit it.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
How to prepare
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
- Mention any sign-in or site rules at work premises
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or send us an email and describe the job.
Related advice
What else we do in Sarre
New homes and floors in Sarre
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That’s why the skirting and threshold joints need a flexible seal.
Rented homes near Minster station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty. Managing a site like St Nicholas At Wade Church of England Primary School? Then floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Sarre is about 5 miles south-east of Herne Bay, in Kent. Every kind of property in Sarre is covered for floor joint sealing, old or new, large or small. Every job comes with our 12-month guarantee. Our area takes in 922 places across Kent, large and small. Our Chelmsford page covers work nearby (42 miles or so).
Work in CT7 is quoted and booked the same way as anywhere else. That includes homes and businesses on Island Road, Old Road and Chantry Park. Neighbouring places we cover for floor joint sealing include St Nicholas at Wade (1 mile north-east), West Stourmouth (1 mile south), East Stourmouth (2 miles south), Monkton (2 miles east) and Upstreet (2 miles south-west). Within a short drive, we also cover Canterbury (8 miles south-west), Margate (7 miles north-east), Dover (14 miles south), Ramsgate (7 miles east), Broadstairs (8 miles east) and Whitstable (9 miles west).
Near you in Sarre
Around Sarre, our work takes us to homes and buildings near Grove Ferry Picnic Area and Kings Head Inn, among other places. Sarre’s nearest station is Minster station, roughly 3.5 miles east. Other landmarks nearby include Powell-Cotton Museum (3.8 miles north-east).
Different surfaces, different methods
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. They’re resealed with a flexible, water-resistant sealant.
Concrete floor joints
Open concrete joints chip at the edges when wheels cross them. A sealed joint protects the edges and stops debris collecting.
What affects the cost of floor joint sealing
There’s no set price list, because no two jobs are the same. What we look at:
- How many areas need sealing
- The old material and how stubborn it is
- The type of sealant required
- How easy the joints are to reach
Combining jobs into one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- A few pictures by email, if you can
- Any access issues, like height or stairs
- Any previous sealing or DIY work
- Where the job is, and your postcode
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Looking after it afterwards
After the cure time, these simple habits help:
- Check the sealant is paintable before decorating
- Vacuum floor joints regularly to stop grit building up
- Cone off fresh joints until they’re ready
- Keep floor cleaning water to a minimum at the edges
Keep heavy furniture from dragging across the joints. Sharp edges can cut the sealant especially in the first few days.
Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen over time.
Do you need floor joint sealing in Sarre?
Wheels crossing an unfilled concrete joint chip its edges. Hard wheels damage the joint edges until the joint widens.
People normally contact us after spotting something like this:
- Chipped and open joints in warehouse floors
- Perimeter joints in tiled floors filled with grout
- Floor edges that trap water and grime
- Caulk that has cracked where the floor moves
If you look after a church, hall or community building such as Church of Saint Nicholas, floor and skirting joints in halls and kitchens wear like any others.
Comparing quotes
- What insurance they hold
- How long to leave it before use
- Who turns up on the day
- Whether all the old sealant comes out first
FAQs for Sarre
Do you cover smaller places like Sarre?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Minster station. Can you help?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Is there a guarantee?
Yes. Every job comes with our 12-month guarantee.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours, depending on the length of joint. We’ll tell you when we quote.
Are you fully insured?
Yes. Mr Mastic is fully insured.
How long before the joint can take traffic?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish.
Can you use decorators’ caulk instead?
Caulk cannot cope with movement or water. Skirting joints move with the floor, so a flexible sealant suits them better.
Can you quote for more than one area?
Yes. Just list everything you need.
What sealant work can’t fix
In fairness, there are a few things sealant will not fix:
- Damaged concrete that needs breaking out and repairing
- Subfloor problems that need a flooring contractor
- A tiled floor that needs relaying
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Concrete floor joints
- Skirting boards
- Thresholds
- Tiled floors
- Commercial floors
- Wet room & bathroom floors