Kent · England
Floor Joint Sealing in Herne Bay
Problem with your floor joints in Herne Bay? We remove the old material, prepare the joints and seal them properly.
- Dirt and water collecting in open floor joints
- Tiled floors with no room to move
- Worn sealant at door thresholds
Joints and finishes in Herne Bay homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
For site and facilities teams at buildings such as Herne Bay Junior School, floor and threshold joints in busy corridors wear quickly and are best resealed early. For landlords with property near Herne Bay station, gaps at skirtings and thresholds are worth sealing between tenancies.
Herne Bay is about 7 miles north of Canterbury, in Kent. Whether you are in the middle of Herne Bay or further out, we cover floor joint sealing for every kind of property. Herne Bay is one of 922 places in Kent we cover. For nearby work, see our Chelmsford page, about 38 miles away.
Here we cover the CT6 postcode area for floor joint sealing. If you need floor joint sealing at a property on High Street, Viscount Square and Market Street or anywhere close by, our applicators can take on the job. With the A299 and B2205 close by, Herne Bay is simple for us to get to. We also cover Hunters Forstal (1 mile south-east), Eddington (1 mile south-west), Broomfield (1 mile south-east), Herne (1 mile south) and Beltinge (1 mile east). Larger places within reach include Canterbury (7 miles south), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (13 miles east), Whitstable (5 miles west) and Deal (15 miles south-east).
Near you in Herne Bay
Around Herne Bay, our work takes us to homes and buildings near Herne Bay High School, Queen's Head Public House and Curtis Wood, among other places. The closest station to Herne Bay is Herne Bay station, about 0.7 miles west of the centre. Other landmarks nearby include Tankerton Castle (4.3 miles west) and Whitstable and Tankerton Hospital (3.6 miles west). For a walk, there’s West Blean and Thornden Woods.
Floor joint sealing in Herne Bay, done properly
Floors move, and the joint where they meet a wall, skirting, threshold or another floor has to move with them. We seal skirting gaps, tiled floor movement joints and concrete floor joints using a product that suits the floor. Common call-outs are for failed seals where bathroom floors meet baths and panels and caulk that has cracked where the floor moves, on thresholds, skirting boards and concrete floor joints.
Homes around Herne Bay move a little with the seasons, and skirting and floor joints show it first. Those joints need a flexible sealant, as rigid filler soon cracks out.
Every job comes with our 12-month guarantee, wherever you are in Kent.
- Location
- Herne Bay (CT6)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about floor joint sealing in Herne Bay
Is there a guarantee on floor joint sealing in Herne Bay?
All our work, in Herne Bay and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you help a landlord with a rental near Herne Bay station?
Yes. We work for letting agents and landlords as well as homeowners. You can phone 0345 464 0079 or email us with the details for a clear quote.
How long will you be here?
As a guide, most jobs take a few hours for most rooms, longer for large commercial floors. Larger jobs naturally take longer.
Do you cover Herne Bay?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland, Herne Bay included.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we are using.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
What affects the quote in Herne Bay
You’ll get a clear quote before work begins. It’s based on:
- Whether the work is at height
- Any mould that needs treating
- The amount of work
- How many rooms, windows or areas are involved
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, phone 0345 464 0079 or email us for an honest opinion and a quote.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- How we’d reach the joints
- Photos by email, if that is easy
- Any previous sealing or DIY work
- The rough size of the job
Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will come back to you with a quote.
Keeping the joints in good condition
So the new joints stay in good condition:
- Lift furniture rather than dragging it across joints
- Avoid caulk in bathrooms and kitchens
- Keep dirt out of the joints
- Use a well-wrung mop rather than flooding the floor
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Mark the area off so drivers avoid it while it cures.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.
When it is not the sealant
Before you book, it’s worth knowing the limits:
- Movement too big for a sealant joint
- Bouncy or failing floorboards
- Water getting under the tiles from elsewhere
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Tiled floors
- Concrete floor joints
- Thresholds
- Commercial floors
- Wet room & bathroom floors
- Skirting boards
What we are called out for in Herne Bay
Concrete floor joints break down when traffic runs over open or failed joints. Pallet trucks and trolleys knock the edges away.
Any of these means the joints need attention:
- Grout cracking in a straight line across a floor
- Failed joint filler in concrete floors
- Perimeter joints in tiled floors filled with grout
- Skirting that has pulled away from the floor
Community buildings like Christ Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Before you book anyone
- Whether they’re fully insured
- What happens if they find a problem under the old sealant
- How the colour is chosen
- How the surfaces are prepared before sealing
What happens if it’s left?
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. It’s a quick job to seal them now. In a family home in Herne Bay, a failed seal around a bath or a frame lets water into places you can’t see, such as under the floor, behind a panel or into a wall. Whatever the joint, failed sealant only gets worse.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- We agree the colour with you first
- Full insurance on every job
- Homes, businesses and hotels
- Anti-fungal silicone where joints get wet
Take a look at how sealant jobs are priced or customer reviews.
Places near Herne Bay
What else we do in Herne Bay
How the visit works
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, depending on the length of joint for a typical job. In Herne Bay, parking is rarely complicated, though it helps to know about driveways or restrictions, and mention if the work is upstairs, in a flat or high on the outside.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and smooth it.
- Finally, we check the work and talk you through aftercare.
How to prepare
- Let us know about parking restrictions
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
How to get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.
Related advice
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.