Isle of Wight · England
Floor & skirting joints in Parkhurst, Isle of Wight
Floor joint sealing in Parkhurst from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Grout cracking in a straight line across a floor
- Threshold joints that have opened or worn
- Skirting caulk that keeps splitting
Surface by surface
Skirting boards
If the skirting is painted, a paintable flexible sealant works well. In wet rooms and kitchens, silicone is normally better.
Tiled floors
When grout cracks along a straight line, the floor is telling you it needs to move. We rake out that line and seal it if it’s in the right place.
About our floor joint sealing in Parkhurst
The gap under a skirting board often opens as floors and walls move with the seasons. Decorators’ caulk generally cracks where there’s movement, so we close it with a flexible sealant instead. Typical jobs include grout used at the floor edge instead of sealant and gaps between floors and kitchen plinths, on thresholds, concrete floor joints and skirting boards.
In a village or hamlet like Parkhurst, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Each still needs its sealant and floor joints finished properly.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Parkhurst (PO30)
- Wider area
- Isle of Wight
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
How the visit works
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours, depending on the length of joint. For a village or hamlet like Parkhurst, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gap and the floor type and agree the right sealant.
- Old caulk, grout or sealant is removed from the joint.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- The sealant goes in, chosen for the floor and coloured to suit it.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
How to prepare
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Mention any sign-in or site rules at work premises
Ask for a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.
Advice
Questions from Parkhurst
Do you cover Parkhurst for floor joint sealing?
Yes, Parkhurst is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear price.
What guarantee comes with floor joint sealing in Parkhurst?
All our work, in Parkhurst and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
What sealant work can’t fix
Before booking, it’s worth knowing the limits too:
- Concrete repairs beyond the joint
- A tiled floor that needs relaying
- Large cracks that need a surveyor
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Surfaces we seal
- Tiled floors
- Commercial floors
- Thresholds
- Wet room & bathroom floors
- Skirting boards
- Concrete floor joints
Why it’s worth doing now in Parkhurst
Dirt builds up in open joints, and they look untidy. Sealed joints are easier to keep clean and finishes the floor. Around Parkhurst, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Parkhurst
- Anti-fungal silicone where joints get wet
- Any old sealant cut out fully, not covered over
- We agree the colour with you first
- More than 20 years in sealant work
Joints and finishes in Parkhurst homes
Across the Isle of Wight, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.
If you look after a building such as Hunnyhill Primary School, entrance and corridor floor joints take a lot of traffic. In and around Parkhurst, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Parkhurst is about 1 mile north of Newport, in the Isle of Wight. Our applicators cover floor joint sealing for homeowners, landlords and businesses in Parkhurst and the surrounding area. Our the Isle of Wight coverage runs to 125 places, and Parkhurst is one of them. We also work in Portsmouth, about 12 miles from Parkhurst.
Here we cover the PO30 postcode area for floor joint sealing. If you need floor joint sealing at a property on Dodnor Lane, Argyle Road and Sherwood Road or a nearby road, our applicators can take on the job. Neighbouring places we cover for floor joint sealing include Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). Larger places within reach include Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). Island and remote addresses take a little more planning, so please mention your location when you phone 0345 464 0079 or drop us an email.
Near you in Parkhurst
We work in homes and buildings around Medina College, Island Innovation VI Form Campus and The Stag pub and the streets around them. Well-known places in the area include Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Open spaces near Parkhurst include Mill Hill and Briddlesford Nature Reserve.
Also near Parkhurst
Other services in Parkhurst
Quotes for floor joint sealing in Parkhurst
There’s no set price list, because no two jobs are the same. The quote depends on:
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
- Access and height
- The number and length of the joints
Doing several joints on one visit generally makes better use of the time than several visits. We’ll give you a clear price for the lot.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Where the job is, and your postcode
- Photos by email, if that is easy
- The problem you’ve noticed
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work and send you a clear quote.
Aftercare tips
A little care helps the new joints last. We recommend:
- Mark off resealed joints in warehouses
- Walk round the room once a year and look at the edges
- Act on grout cracks that run in a straight line
- Keep dirt out of the joints
Keep heavy traffic off resealed concrete joints for the cure time we give you. Mark the area off so drivers avoid it while it cures.
In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.