Isle of Wight · England
Lake Floor Joint Sealing
Professional floor joint sealing in and around Lake, with old sealant always removed completely.
- Gaps between floors and kitchen plinths
- Worn sealant at door thresholds
- Tiled floors with no room to move
How we handle floor joint sealing in Lake
Wet-area floor joints keep water out of the gap behind skirting and plinths. We seal them with a flexible, water-resistant sealant so water and dirt cannot get in. Typical jobs include gaps at thresholds between rooms and failed joint filler in concrete floors, across concrete floor joints, tiled floors and thresholds.
In smaller places like Lake, new homes tend to come as small developments or single plots. The sealant around baths, showers, frames and skirtings needs to be right from the start.
Big or small, you get the same 12-month guarantee.
- Where
- Lake (PO36, PO37)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of floor joint sealing
Every job gets its own quote. This is what makes a difference:
- How easy the joints are to reach
- The number of rooms or windows
- The type of sealant required
- The old material and how stubborn it is
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Helping us quote
Photos help, but a description is a good start. Please mention:
- Where the property is
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
- How we’d reach the joints
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.
Towns and villages near Lake
More services for Lake
Floor joint sealing around Lake
Across the Isle of Wight, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal.
Managing a site like Broadlea Primary School? Then floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. Community buildings like Church of The Good Shepherd are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. Rented homes near Lake station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Lake is about 1 mile south-west of Sandown, in the Isle of Wight. From the centre of Lake to the outskirts, floor joint sealing is available for homes and businesses alike. 125 places in the Isle of Wight are on our list. We also work in Portsmouth, about 12 miles from Lake.
Jobs for floor joint sealing in PO36 and PO37 works the same way as everywhere else we cover. Streets in the area include Lea Road, New Road and Percy Road. Being close to the A3055, Lake is easy for our applicators to reach. We also cover Sandown (1 mile north-east), Alverstone (1 mile north-west), Queen's Bower (1 mile north-west), Shanklin (1 mile south) and Alverstone Garden Village (1 mile north-west). Larger places within reach include Newport (7 miles north-west), Ryde (5 miles north), Cowes (10 miles north-west), Ventnor (4 miles south-west), East Cowes (9 miles north-west) and Oakfield (5 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Lake
Typical jobs here are in homes near Sandown Bay Academy, The Old Comical pub and The Bay Church of England School, among other places. There’s a railway station in Lake itself: Lake station. Other landmarks nearby include National Poo Museum (less than half a mile east) and Arthur Webster Memorial Hospital for Children (1.2 miles south-west). Green spaces nearby include Brading Down and Alverstone Mead.
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Common questions in Lake
Do you cover Lake for floor joint sealing?
Yes. We work across London and the South East, and Lake is part of that. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.
Will you come out to Lake?
Yes. Lake is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you seal where the floor meets the bath panel?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone so water cannot get into the gap.
Where are you based?
We work from Crawley. Our applicators cover Lake.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
Can tenants book the work?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Will I be able to paint over the new joint?
It depends on the sealant, so let us know first. We use a paintable flexible sealant on joints you plan to paint.
Do you seal warehouse floor joints?
Yes. Concrete floor joints in warehouses and units are part of our work. We will talk through the traffic and choose a sealant suited to it.
What we cannot put right
New sealant can’t fix everything, and we’d rather say so up front. Sealant won’t put right:
- Bouncy or failing floorboards
- A tiled floor that needs relaying
- Damaged concrete that needs breaking out and repairing
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Lake
- Tiled floors
- Commercial floors
- Concrete floor joints
- Wet room & bathroom floors
- Skirting boards
- Thresholds
Surface by surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Tiled floors
Tiled floors need movement joints at edges and across large areas. Where needed, a line of grout is replaced with flexible sealant in a matching colour.
For landlords and businesses
Landlords and agents in Lake can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Sweep along the edges of the floor
- Cone off fresh joints until they’re ready
- Lift furniture rather than dragging it across joints
- Walk round the room once a year and look at the edges
Silicone sealant isn’t made to take paint. If the joint will be painted, tell us beforehand so we use a paintable sealant.
Small gaps are quick to seal. Ignored, they fill with dirt and open further and are harder to clean out.
How the visit works
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes a morning or an afternoon for most homes. A visit to Lake is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We clear the edges of the floor so the joints are easy to reach.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- We check the joints and explain the aftercare.
Getting ready for the visit
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we’re working on
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and give you a clear price.