Highland · Scotland
Floor & skirting joints in Inver, Highland
Problem with your floor joints in Inver? We remove the old material, prepare the joints and seal them properly.
- Gaps opening between the floor and skirting
- Gaps at thresholds between rooms
- Skirting caulk that keeps splitting
Floor joint sealing in Inver, done properly
Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side in a colour to suit. We work on wet room & bathroom floors, concrete floor joints and tiled floors, and common reasons people get in touch are concrete floor joints that have broken down and cracked grout where a tiled floor needs a movement joint.
New homes in smaller Scottish places are often single plots, self-builds or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
Big or small, you get the same 12-month guarantee.
- Where
- Inver (IV20)
- Region
- Highland
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a morning or an afternoon for most homes, depending on the size of the job. Somewhere like Inver may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We look at the gap and the floor type and agree the right sealant.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- The sealant goes in, chosen for the floor and coloured to suit it.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Let us know about stairs, lifts or work at height
- Tell us about any water getting in
Ask for a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Read more
Quotes for floor joint sealing in Inver
For a quick quote, just ask. The main things that affect it are:
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
- Working hours on commercial sites
- Mould in or behind the old joints
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- The address or postcode of the job
- What’s wrong with the joints now
- Pictures of the joints, sent by email
If you’re in Inver and need floor joint sealing, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before we start.
When it isn’t the sealant
To be straight with you, there are a few things sealant won’t fix:
- Leaks from a failed tanking system
- Floors that are uneven or need levelling
- Cracked or broken concrete slabs
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Inver
- Thresholds
- Tiled floors
- Concrete floor joints
- Commercial floors
- Wet room & bathroom floors
- Skirting boards
Surface by surface
Wet room and bathroom floors
Mop water gets into any open joint at the edge of a bathroom floor. A flexible seal stops water running into the gap.
Concrete floor joints
Old filler, dust and debris are cleaned out of the joint first. We fit backing where needed.
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Inver and across Highland. We can quote a run of properties together.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Nearby places to Inver
Also in Inver
New homes and floors in Inver
Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up. Floors around Highland run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
Around Inver, as everywhere, floor joint sealing is only as good as the preparation behind it. Rented homes near Fearn station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Inver is about 16 miles north of Nairn, in Highland. Jobs in Inver get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 253 towns and villages across Highland.
Here we cover the IV20 postcode area for floor joint sealing. That includes homes and businesses on Main Street, Front Street and New Street. Nearby, we also carry out floor joint sealing in Hill of Fearn (4 miles south-west), Portmahomack (4 miles east), Fearn (4 miles south-west), Hilton of Cadboll (4 miles south) and Loans of Tullich (4 miles south). We also work in nearby towns such as Tain (5 miles west), Alness (15 miles south-west), Dornoch (6 miles north-west), Invergordon (13 miles south-west), Golspie (11 miles north) and Brora (13 miles north). If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
Around Inver
The closest station to Inver is Fearn station, about 4 miles south-west of the centre. Nearby you will also find Ballone Castle (4.2 miles east). Not far away are Loch Eye.
What happens if it’s left?
Putting new grout into a crack that keeps reappearing doesn’t last. The movement is still there, so the grout fails again. A flexible movement joint is the fix. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Doing several joints on one visit is usually more efficient than separate visits. We’ll give you a clear quote for the lot.
Why book with us
- Tidy, careful work
- Quality sealants from Arbo and Everbuild
- Any old sealant cut out fully, not covered over
- A sealant colour to suit the surroundings
See our cost guide or our reviews.
Common questions in Inver
Do you cover Inver for floor joint sealing?
Yes. We work across all of Scotland, and Inver is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear quote.
I let a flat near Fearn station. Can you help?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
How soon can the floor be mopped?
That varies with the sealant and the room. Before we leave, we tell you when it can be walked on, mopped and driven over so you can plan.
Why not just use caulk?
Caulk is fine for dry joints that do not move, but it splits where the joint moves or gets wet. For most floor joints, we use a flexible sealant.
Can sealant along the skirting be painted?
Where you plan to paint, we do. Silicone in bathrooms and kitchens can’t be painted.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Do you have insurance?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
Do you seal warehouse floor joints?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic and we’ll quote.
Looking after it afterwards
After the cure time, these simple habits help:
- Check skirting joints after the heating season
- Have a cracking tiled floor checked before tiles break
- Use a well-wrung mop rather than flooding the floor
- Avoid caulk in bathrooms and kitchens
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
A gap under the skirting collects dust and lets draughts through. Sealing it keeps the room tidier.