Surrey · England
Floor & skirting joints in Belmont, Surrey
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Belmont and across Surrey. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps opening between the floor and skirting
- Floor edges that trap water and grime
- Cracked caulk along skirting in bathrooms and kitchens
Floor joint sealing in Belmont, done properly
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors. Common call-outs are for perimeter joints in tiled floors filled with grout and threshold joints that have opened or worn, on concrete floor joints, commercial floors and skirting boards.
Where new homes go up in smaller places like Belmont, it’s often a small development or a single plot. Each still needs its sealant and floor joints finished properly from day one.
Every job is covered by a one-year guarantee.
- Where
- Belmont (SM2, SM5)
- Region
- Surrey
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Use a well-wrung mop rather than flooding the floor
- Avoid caulk in bathrooms and kitchens
- Ask before painting over a sealed joint
- Cone off fresh joints until they’re ready
Keep off the joint for the time we give you. Light foot traffic is generally fine sooner than wet cleaning or wheels.
Once concrete joint edges start to break, wheels make it worse. Sealing them early protects the edges and the surface smoother.
How we quote for floor joint sealing
We quote each job individually. These are the things that affect it:
- The number of rooms or windows
- Any working-time requirements on site
- Access and height
- How much old sealant there is and how hard it is to remove
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What we need to know
Before you ask for a quote, have a think about:
- If someone has resealed it before
- Where the property is
- The rough size of the job
- A few pictures by email, if you can
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, ring 0345 464 0079 or send us an email.
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Belmont and across Surrey. We can quote a run of properties together, and we’re fully insured.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
What happens on the day
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a few hours, depending on the length of joint, including the tidy-up. For a job in Belmont, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor and smooth it.
- Finally, we check the work and talk you through aftercare.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
- Move anything stored near the joints
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Advice
Common questions in Belmont
Can you do floor joint sealing in Belmont?
Yes. Our work covers London and the South East, and Belmont is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Belmont?
Yes. Belmont is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Where do you work from?
Our base is in Crawley, and we work across South East England, London and Scotland.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
Can grout be replaced with sealant on a tiled floor?
Often, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant. If tiles are loose, that needs fixing first.
Do you seal kitchen plinths to the floor?
Yes. The old joint comes out and a flexible silicone replaces it.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
What floor joint sealing looks like in Belmont
Floors around Surrey run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
Schools such as Avenue Primary Academy are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. For buildings such as Church of St John, joints in its floors, skirtings and thresholds need resealing as they wear.
Belmont is about 2 miles south of Sutton, in Surrey. From the centre of Belmont to the outskirts, we cover floor joint sealing for every kind of property, from flats and houses to offices and hotels. Belmont is one of 395 places in Surrey we cover. We also work in London, about 12 miles from Belmont.
Here we cover the SM2 and SM5 postcode area for floor joint sealing. Floor joint sealing is available to properties on The Avenue, Sandy Lane and Downs Road. Nearby, we also carry out floor joint sealing in Cheam (1 mile north-west), Cuddington (2 miles north-west), North Looe (2 miles west), Nork (2 miles south-west) and North Cheam (2 miles north). Within a short drive, we also cover Epsom (3 miles west), Horley (11 miles south), Redhill (7 miles south), Reigate (7 miles south), Walton-on-Thames (9 miles west) and Caterham (6 miles south-east).
Around Belmont
In Belmont, that means homes and buildings near Howell Hill, Glaisdale School and Harris Academy Sutton. There’s a railway station in Belmont itself: Belmont station. Well-known places in the area include The Ashley Centre (3 miles west) and Honeywood Museum (2.2 miles north-east). For a walk, there’s Duppas Hill and Belmont Pastures.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
When to call us in Belmont
Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away until the joint widens.
Signs it’s time to call us include:
- Rigid edge joints in tiled floors
- Cracked grout where a tiled floor needs a movement joint
- Gaps opening between the floor and skirting
- Concrete floor joints that have broken down
If you let a flat or house near Belmont station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- How long the guarantee is
- Whether they’re fully insured
- How long to leave it before use
- How much experience the applicator has
Surface by surface
Wet room and bathroom floors
Floor joints in bathrooms take water every day. They’re sealed with a flexible, anti-fungal silicone that keeps water out.
Thresholds
Two different floors meeting at a threshold move differently. We bridge them with a flexible bead.