Surrey · England
Fire-rated sealant in Belmont, Surrey
Fire rated sealant for Belmont and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Sealant items on a fire risk assessment action list
- Gaps where walls meet ceilings or slabs
- Open holes round services passing through fire walls
About our fire rated sealant in Belmont
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, and we can record what went where. We work on plasterboard & masonry, flats & HMOs and linear gaps, and people most often call us about gaps left after a refit or conversion and sealant items on a fire risk assessment action list.
For a pub, café, guest house or shop in or near Belmont, its washrooms and kitchen need the same sealant care as any big building.
Whatever the size of the job, you get the same one-year guarantee in Belmont and across Surrey.
- Where
- Belmont (SM2, SM5)
- Region
- Surrey
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
What the job involves on each surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point against the product’s tested range.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Keep the record of products and locations with your fire safety documents
- Never patch a fire seal with standard sealant
- Ask every contractor to reseal any fire stopping they disturb
- Get damaged fire seals looked at promptly
Any fire seal that is cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes.
What affects the cost of fire rated sealant
Every job gets its own quote. These are the things that affect it:
- Whether there’s mould to deal with
- How much there is to do
- Whether the work is at height
- How many rooms, windows or areas are involved
The cost depends on the size of the job, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
Asking for a quote
To help us quote quickly, let us know:
- Where the job is, and your postcode
- Photos by email, if that is easy
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
For fire rated sealant in Belmont, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a job in Belmont, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your records.
Preparing for the visit
- Mention if the joints have been sealed before
- Mention any parking rules near the property
- Clear the area around the work
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, ring 0345 464 0079 or email us.
Read more
Places near Belmont
Other services in Belmont
Why deal with it now?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. In a smaller place like Belmont, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Why us?
- Over 20 years’ experience
- Trusted Arbo and Everbuild sealants
- Full insurance on every job
- 12-month guarantee on every job
See our cost guide or our reviews.
What fire rated sealant looks like in Belmont
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
If you look after a church, hall or community building such as Church of St John, gaps around pipes and cables are worth checking after any building work there. If you look after a building such as Avenue Primary Academy, fire-stopping around service openings should be restored whenever new services go in. For landlords with property near Belmont station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Belmont is about 2 miles south of Sutton, in Surrey. Across the SM2 area, our applicators can take on fire rated sealant. We cover 395 towns and villages across Surrey, from the larger towns to small villages. Our London page covers work nearby.
Jobs for fire rated sealant in SM2 and SM5 works the same way as everywhere else we cover. We cover properties on The Avenue, Sandy Lane and Downs Road. Neighbouring places we cover for fire rated sealant include Cheam (1 mile north-west), Cuddington (2 miles north-west), North Looe (2 miles west), Nork (2 miles south-west) and North Cheam (2 miles north). We also work in nearby towns such as Epsom (3 miles west), Horley (11 miles south), Redhill (7 miles south), Reigate (7 miles south), Walton-on-Thames (9 miles west) and Caterham (6 miles south-east).
Local landmarks in Belmont
Locally, jobs take us to homes and businesses close to Howell Hill, Glaisdale School and Harris Academy Sutton. There’s a railway station in Belmont itself: Belmont station. Other landmarks nearby include The Ashley Centre (3 miles west) and Honeywood Museum (2.2 miles north-east). Not far away are Duppas Hill and Belmont Pastures.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Common questions in Belmont
Can you help a landlord with a rental near Belmont station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Is Belmont in your area for fire rated sealant?
Yes, Belmont is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product.
What does fire rated sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that generally means someone at home.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.