Surrey · England

Fire-rated sealant in Nork, Surrey

Specialist fire rated sealant for Nork: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Old fire sealant that has split or come away
  • Gaps flagged on a fire risk assessment
  • Holes left by a change of layout

Book fire rated sealant in Nork

About our fire rated sealant in Nork

Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. Typical jobs include open joints along the top of partitions and new service routes left unsealed after building work, on linear gaps, door frames and pipe & cable gaps.

Commercial work around a smaller place like Nork normally means a pub, a shop, a school or small business units rather than office blocks. Each needs the same care with its sealant as any larger building.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.

Eleven members of the Mr Mastic team standing in front of branded white vans
Location
Nork (SM7, KT17)
Wider area
Surrey
Cover
12 months on all our work
Quote
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026

Your questions about fire rated sealant in Nork

Do you cover Nork for fire rated sealant?

Yes. We work across London and the South East, and Nork is part of that. Just call 0345 464 0079 or email us with a few details of the job.

Do you work for landlords with property near Banstead station?

Yes. We work for letting agents and landlords as well as householders. You can phone 0345 464 0079 or send us an email with the details for a clear quote.

Will there be a smell?

Possibly a little. Any smell clears as the sealant cures.

Which products do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.

Can ordinary silicone be used in a fire-stopping gap?

No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.

Is it worth trying it myself?

That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.

Can you give us a record of the work?

Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.

Where is Mr Mastic based?

We’re a Crawley-based firm. We work across South East England, London and Scotland.

Looking after it afterwards

To keep the joints looking good and working properly:

  • Keep photos of seals that will be hidden
  • Include fire stopping when you schedule refits
  • Do not fill fire-stopping gaps with ordinary foam or silicone
  • Ask every contractor to reseal any fire stopping they disturb

Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.

An open gap isn’t only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.

What sealant work cannot fix

To be straight with you, some problems need a different trade:

  • Construction that doesn’t provide fire resistance on its own
  • Issuing a fire rating or certificate for a building
  • Doors that are not fire doors in the first place

Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.

What we seal

  • Door frames
  • Pipe & cable gaps
  • Service penetrations
  • Linear gaps
  • Flats & HMOs
  • Plasterboard & masonry

Common problems we fix in Nork

Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.

If you can see any of these, it’s time to have the joints looked at:

  • Open gaps behind door architraves
  • Old fire sealant that has split or come away
  • Joints picked up in a fire-stopping survey
  • Open joints along the top of partitions

Managing a site like Warren Mead Infant School? Then service openings in fire-resisting walls need checking after any refurbishment.

Before booking anyone

  • How long the guarantee is
  • Are they insured?
  • Which colour the sealant will be
  • Who does the work, and how experienced they are

How to choose a mastic man

Different surfaces, different methods

Flats and HMOs

Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment.

Masonry and concrete

Masonry is dusty and porous, so preparation matters. We brush and vacuum the gap and use backing where the detail needs it.

The process

All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a job in Nork, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. Access to each area is agreed so the work can run in order.
  2. We take out any damaged or unsuitable sealant.
  3. Dust and loose debris are cleaned from each gap.
  4. We apply and tool the sealant to the product’s tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Getting ready for the visit

  • Let us know about earlier repairs to the joints
  • Tell us about any water getting in
  • For business premises, tell us about site rules or sign-in

Getting a quote

Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we will come back to you with a quote.

Get a price

Related advice

Why act early in Nork

Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that doesn’t depend on other work. Around Nork, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.

What it costs depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before work begins, so you know where you stand.

Why Nork clients choose us

  • Neat joints and a tidy finish
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Any old sealant cut out fully, not covered over
  • Experience in homes, commercial sites and hotels

See our cost guide and what customers say.

Work for landlords, hotels and businesses

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

Fire rated sealant in Nork: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

For landlords with property near Banstead station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as St Paul, gaps around pipes and cables are worth checking after any building work there.

Nork is about 2 miles south-east of Epsom, in Surrey. Our applicators cover fire rated sealant for homes and businesses in Nork and the surrounding area. Nork is one of 395 places in Surrey we cover for fire rated sealant. Our London page covers work nearby, about 13 miles away.

Here we cover the SM7 and KT17 postcode area for fire rated sealant. You’ll find streets such as Rowan Close, Parsonsfield Road and Nork Way, all of which we cover. Being close to the B291, Nork is simple for us to get to for fire rated sealant. If you’re just outside Nork, we cover Epsom Downs (1 mile west), Great Burgh (1 mile south-west), Burgh Heath (1 mile south), North Looe (1 mile north-west) and Tattenham Corner (1 mile south-west). Larger places within reach include Woking (15 miles west), Horley (10 miles south), Redhill (6 miles south), Ewell (3 miles north-west), Reigate (6 miles south) and Walton-on-Thames (9 miles north-west).

What’s near Nork

Around Nork, our work takes us to homes and buildings near Priest Hill, The Beacon School and The Beacon School, among other places. The closest station to Nork is Banstead station, roughly 0.6 miles north-east. Nearby you’ll also find Walton on the Hill (3 miles south) and Cockney Museum (3 miles north). For a walk, there’s Cuddington Meadows and Colley Hill.

Map of Nork © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job