Isle of Wight · England
Fire-rated sealant in Yarmouth, Isle of Wight
Fire rated sealant for Yarmouth and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- New service routes left unsealed after building work
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
Yarmouth: your questions answered
Is Yarmouth within the area you cover?
Yes. Yarmouth is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for hotels and guest houses in Yarmouth?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Where do you work from?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Fire rated sealant in Yarmouth
We often work from an action list drawn up by a fire risk assessor for buildings in Yarmouth. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. We work on door frames, pipe & cable gaps and plasterboard & masonry, and people most often call us about linear gaps at the head of walls and open gaps behind door architraves.
If you have holiday lets, a converted barn used for business or a community building near Yarmouth, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Yarmouth (PO41)
- Wider area
- Isle of Wight
- Cover
- 12 months on all our work
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Also in Yarmouth
Quotes for fire rated sealant in Yarmouth
Every job gets its own quote. This is what makes a difference:
- The size of the job
- How easy the joints are to reach
- Working hours on commercial sites
- The old material and how stubborn it is
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Pictures of the joints, sent by email
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Commercial buildings in Yarmouth
If you run a hotel, guest house or holiday let in a coastal place like Yarmouth, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. There are hotels and other places to stay in and around Yarmouth. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
For buildings such as St. James' Church, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Lymington Pier station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Yarmouth is about 4 miles south-east of Lymington, in the Isle of Wight. For fire rated sealant in and around Yarmouth, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We cover the Isle of Wight from our Crawley base. Our area takes in 125 places across the Isle of Wight. You can also see our page for Southampton, roughly 15 miles from Yarmouth.
Here we cover the PO41 postcode area for fire rated sealant. We cover properties on High Street, Station Road and Alma Place. You will find Yarmouth on the A3054, so it’s easy for us to get to. Close by, we work in Bouldnor (1 mile east), Cranmore (2 miles east), Hamstead (3 miles east), Shalfleet (3 miles east) and East End (5 miles north). Within a short drive, we also cover Newport (9 miles east), Ryde (15 miles east), Cowes (9 miles north-east), Sandown (15 miles east), Shanklin (15 miles east) and Ventnor (15 miles south-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
What’s near Yarmouth
Around Yarmouth, our work takes us to homes and buildings near Bugle Hotel, among other places. The closest station to Yarmouth is Lymington Pier station, about 3.9 miles north of the centre. A little further out are Yarmouth Castle (less than half a mile north-west) and Ferguson Family Museum (1.2 miles south-west). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
Do you need fire rated sealant in Yarmouth?
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
These are the problems we are asked about most:
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
- Fire seals that have cracked with movement
- Joints picked up in a fire-stopping survey
Schools such as Yarmouth Church of England Aided Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Questions to ask before you book
- How the colour is chosen
- Who does the work, and how experienced they are
- Whether they seal over old material or remove it
- How long the guarantee is
Landlords, agents and businesses in Yarmouth
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Keeping the joints in good condition
Looking after new joints is easy:
- Make resealing part of every contractor’s brief
- Check whether a sealant can be painted before decorating over it
- Include hidden areas like risers in routine checks
- Include fire stopping when you schedule refits
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
The process
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It usually takes anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Yarmouth, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or send us an email.
Related advice
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
Different surfaces, different methods
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first.