Greater London · England
Wimbledon Park Fire Rated Sealant
Fire-stopping gaps in Wimbledon Park need attention? We remove the old material, prepare the joints and seal them properly.
- Open gaps behind door architraves
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
Fire rated sealant in Wimbledon Park
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. Typical jobs include open holes round services passing through fire walls and gaps where walls meet ceilings or slabs, on pipe & cable gaps, flats & HMOs and service penetrations.
London’s offices, shops, hotels, student accommodation and blocks of flats all have joints to look after, whether that is washroom resealing or fire-rated sealant around service openings. Where a building in Wimbledon Park needs to stay open, work can be planned outside normal hours.
Our work is backed for twelve months, in Wimbledon Park and everywhere else we cover.
- Place
- Wimbledon Park (SW19, SW18)
- Wider area
- Greater London
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Why it’s worth doing now in Wimbledon Park
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own. In older London homes, water behind a failed joint soaks into brick and timber without much sign, and by the time it shows on a wall or ceiling in Wimbledon Park, the repair is bigger than the sealant job would have been.
What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts.
Why Wimbledon Park clients choose us
- Fully insured
- Rated 4.9 stars on Google
- More than 20 years in sealant work
- We never seal over old sealant
Read our cost guide and our reviews.
Signs you need fire rated sealant in Wimbledon Park
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave doesn’t always get resealed.
These are the problems we are asked about most:
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
- Old fire sealant that has split or come away
- Unsealed gaps around fire door frames
For site and facilities teams at buildings such as Albemarle Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
What your quote should include
- What the cure time is
- What insurance they hold
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
What affects the quote in Wimbledon Park
Call for a quick quote. The main things that affect it are:
- Mould in or behind the old joints
- The number of rooms or windows
- Which sealant suits the joint
- The number and length of the joints
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
What to tell us for a quote
To make quoting easier, let us know:
- Roughly how big the job is
- Photos by email, if that is easy
- The address or postcode of the job
- What’s wrong with the joints now
Need a quote? Please call 0345 464 0079 or send us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before any work starts.
How the job changes by surface
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes are not treated the same. We follow the manufacturer’s tested detail for each, and tell you if sealant alone is not the right fix.
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
Your questions about fire rated sealant in Wimbledon Park
Can parking be tricky for a visit in Wimbledon Park?
Parking in Wimbledon Park, as in most of London, takes a little planning: a visitor permit or a nearby bay makes the day run more smoothly, so mention what’s available when you book.
Do you take on hotel work around Wimbledon Park?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
What does fire rated sealant cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will tell you what we are using.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or email us.
Is standard sealant good enough for a fire gap?
No. Standard sealants are not made or tested to stop fire. We cut it out and reseal with a fire-rated product.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Check whether a sealant can be painted before decorating over it
- Store the list of sealed gaps with your building paperwork
- Keep pictures of seals that will be hidden
- Do not fill fire-stopping gaps with ordinary foam or silicone
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
Fire rated sealant in Wimbledon Park: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. There are hotels and other places to stay in and around Wimbledon Park. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a church, hall or community building such as Church of St Luke, older buildings that have had new heating or wiring often have service gaps worth checking. Wimbledon Park is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.
Wimbledon Park is about 1 mile north of Wimbledon, in Greater London. Wherever you are in the SW19 postcode area, we cover fire rated sealant for homes and businesses. Our Greater London coverage runs to 764 places, and Wimbledon Park is one of them. London is on our list too, about 7 miles from Wimbledon Park.
All of SW19 and SW18 is within our area for fire rated sealant. That includes homes and businesses on Dora Road, Church Road and Arthur Road and the roads around them. You will find Wimbledon Park on the A218, which makes it straightforward to reach with everything needed for fire rated sealant. Other places close to Wimbledon Park include Wimbledon (1 mile south), Crooked Billet (1 mile south-west), Copse Hill (2 miles south-west), Merton Park (2 miles south) and Wimbledon Chase (2 miles south). Larger places within reach include London (7 miles north-east), City of Westminster (6 miles north-east), Marylebone (6 miles north-east), Kensington (4 miles north), St Pancras (7 miles north-east) and Shoreditch (8 miles north-east).
Local landmarks in Wimbledon Park
Around Wimbledon Park, our work takes us to homes and buildings near Ricards Lodge High School, Linden Lodge School and King George's Park and the streets around them. For rail, the closest station is Earlsfield station, about 1 mile north-east. Other landmarks nearby include Royal Hospital for Neuro-disability (1.1 miles north) and Southside Wandsworth (1.4 miles north-east). For a walk, there’s Battersea Park Lake and Wandle Meadow Nature Park.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Places near Wimbledon Park
More services for Wimbledon Park
How the visit works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a handful of gaps, and longer for a whole building. For a job in Wimbledon Park, parking and access are the things to plan: tell us about permits, visitor bays or off-street space, which floor we’re working on and whether there’s a lift.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
- Let us know about parking restrictions
Get a quote
To get a quote, ring 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.