Hertfordshire · England
Stevenage Fire Rated Sealant
Fire rated sealant across Stevenage and nearby, with old sealant always removed completely.
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant in Stevenage
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. If you share the list, we can quote for the gaps that need fire-rated sealant. If you have sealant items on a fire risk assessment action list and gaps around pipes and cables through fire-resisting walls, we can put it right, whatever the surface.
Landlords with flats and shared houses in Stevenage often need both kinds of work: new sealant in bathrooms and kitchens, and fire-rated joints around service openings. We can quote for a single property or a whole portfolio.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Stevenage (SG1, SG2, SG3)
- Region
- Hertfordshire
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Do you need fire rated sealant in Stevenage?
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it isn’t a fire-rated seal.
Look out for any of the following:
- Damaged fire sealant left by other trades
- Standard silicone or caulk in a fire-stopping gap
- Holes left by a change of layout
- Cracked or shrunken fire-rated sealant
Community buildings like St Hugh & St John are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Before you book anyone
- Whether VAT is included
- How the surfaces are prepared before sealing
- Whether the sealant suits the joint
- What happens if the job turns out different
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- When we can work, for business premises
- Whether there’s mould to deal with
- Whether the work is at height
- The product the joint needs
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or send us an email.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Any access issues, like height or stairs
- What’s wrong with the joints now
- Photos by email, if that’s easy
For fire rated sealant in Stevenage, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before any work starts.
Towns and villages near Stevenage
What else we do in Stevenage
Stevenage questions
Do you cover Stevenage for fire rated sealant?
Yes. Our work covers London and the South East, and Stevenage is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear price.
Do you work for landlords with property near Stevenage station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Can you match the sealant colour?
Most of the time, yes. We will tell you which colours the right product comes in.
Do you take on fire stopping in schools and offices?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use, with access planned around residents or staff. Out-of-hours work can be arranged if that suits the building.
Will we have a record of what was sealed?
Yes. When the job is done, we give you the locations and products. If you need photos or a set layout, ask when you get a quote.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Where do you work from?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Do you seal gaps around fire door frames?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame, and we’ll mention anything we notice about the door.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Surface by surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run.
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for the gap we’re sealing.
How to look after the new joints
So the new joints stay in good condition:
- Make resealing part of every contractor’s brief
- Allow for resealing whenever new services are run
- Include hidden areas like risers in routine checks
- Report cracked or damaged seals as soon as you notice them
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Landlord and commercial work in Stevenage
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Workplaces and buildings in Stevenage
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details. Stevenage was built as one of England’s post-war new towns. Stevenage was planned with its own industrial and business areas, so there are offices, units and workplaces not far from home. Each has washrooms, kitchens and fire-rated joints to keep in order.
If you look after a building such as Saint Vincent de Paul Catholic Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. If you let a flat or house near Stevenage station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Stevenage is about 26 miles east of Milton Keynes, in Hertfordshire. Stevenage gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 381 towns and villages across Hertfordshire. Our London page covers work nearby (29 miles or so).
Here we cover the SG1, SG2 and SG3 postcode area for fire rated sealant. You’ll find streets such as King Pin Square, Market Square and Market Place. Stevenage is on the A602 and B197, so it’s easy for us to get to with everything needed for fire rated sealant. If you are just outside Stevenage, we cover Bedwell (1 mile south-west), Pin Green (1 mile north-west), Chells (1 mile east), St Nicholas (1 mile north) and Rooks Nest (1 mile north). We also work in nearby towns such as St Albans (13 miles south-west), Bishop's Stortford (15 miles east), Welwyn Garden City (8 miles south), Harpenden (10 miles south-west), Hitchin (5 miles north-west) and Hoddesdon (13 miles south-east). Being one of Hertfordshire’s larger places, Stevenage has every kind of property, from flats to offices.
Near you in Stevenage
We work in homes and buildings around The Heathcote School, Church of Saint Nicholas and Marriotts School and the streets around them. The closest station to Stevenage is Stevenage station, about 1.2 miles south-west. A little further out are Benington Castle (2.9 miles east) and Stevenage Museum (0.8 miles south-west). For a walk, there’s Pryor's Wood.
What happens on the day
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes from a few hours to a few days, depending on the number of gaps and the access, including the tidy-up. Jobs in a place the size of Stevenage range from town-centre flats to offices and family homes. Whichever it is, tell us how to get in, where to park and where the work is.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any tricky access
- Keep pets and children clear of the area while we work
- Let us know if you’ve seen damp or leaks
How to get a quote
We quote each job on its own. Just ring 0345 464 0079 or send us an email with the details.