Southend-on-Sea · England
Fire Rated Sealant in Southend-on-Sea
Professional fire rated sealant in and around Southend-on-Sea, with every bit of old sealant taken out first.
- Gaps filled with a product that isn’t fire-rated
- Linear gaps at the head of walls
- Seals cut through by electricians, plumbers or data installers
Why deal with it now?
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. In a busy place like Southend-on-Sea, a failed joint in a flat or office can send water into the space below, where it’s often found late and is bigger to put right.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
What you get with us
- An ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
- One-year guarantee on every job
- Full insurance on every job
Take a look at our cost guide and what customers say.
Fire rated sealant in Southend-on-Sea, done properly
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Common call-outs are for open joints along the top of partitions and open gaps behind door architraves, across door frames, service penetrations and pipe & cable gaps.
Hotels and other accommodation in Southend-on-Sea need sealant work done around guests. Work can be planned room by room, and out of hours where needed.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Place
- Southend-on-Sea (SS2, SS0, SS9, SS1)
- Region
- Southend-on-Sea
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Also near Southend-on-Sea
More services for Southend-on-Sea
What we’re called out for in Southend-on-Sea
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
The problems people generally mention when they call include:
- Gaps where walls meet ceilings or slabs
- Gaps around pipes and cables through fire-resisting walls
- Gaps filled with a product that isn’t fire-rated
- Door frames with gaps between frame and wall
Rented homes near Prittlewell station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Questions to ask before booking
- What the cure time is
- Are they insured?
- How the surfaces are prepared before sealing
- Is the old sealant removed completely?
What we do, step by step
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes from a few hours to a few days, depending on the number of gaps and the access. Jobs in a place the size of Southend-on-Sea range from town-centre flats to offices and family homes. Whichever it is, tell us how to get in, where to park and where the work is.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Getting ready for the visit
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know if you’ve seen damp or leaks
How to get a quote
We don’t publish a price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, call 0345 464 0079 or send us an email.
Related advice
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Fire rated sealant around Southend-on-Sea
For seaside hotels, guest houses and holiday lets around Southend-on-Sea, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Managing a site like Westborough Academy? Then service openings in fire-resisting walls need checking after any refurbishment. Community buildings like Church of St Mary are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Southend-on-Sea is about 34 miles east of London, in Southend-on-Sea. We provide fire rated sealant to homeowners, landlords and businesses in Southend-on-Sea and nearby, as part of our work across Southend-on-Sea. Our area takes in 16 places across Southend-on-Sea. There’s also a page for Chelmsford, about 16 miles away.
All of SS2, SS0, SS9 and SS1 is covered for fire rated sealant, from the main roads to the quietest streets. That includes homes and businesses on London Road, Station Road and Maple Square. Main roads around Southend-on-Sea include the A13 and A127, which makes travel easy. If you’re just outside Southend-on-Sea, we cover Westcliff-on-Sea (1 mile south-west), Milton (1 mile south), Chalkwell (1 mile west), Leigh-on-Sea (2 miles west) and Eastwood (2 miles north-west). Further out, we also cover Shoeburyness (4 miles east), North Shoebury (4 miles east), Great Wakering (5 miles east) and Thorpe Bay (3 miles east).
What’s near Southend-on-Sea
Typical jobs here are in homes near The Railway Hotel, Prittlewell Square and Southend High School for Boys and the streets around them. The nearest railway station is Prittlewell station, about 0.6 miles east. Well-known places in the area include Southend University Hospital (0.6 miles north-west) and Southend Historic Aircraft Museum (0.9 miles north). For a walk, there’s Two Tree Island.
For landlords and businesses
If you manage several properties in or around Southend-on-Sea, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Landlords and letting agents in Southend-on-Sea can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Common questions in Southend-on-Sea
I let a flat near Prittlewell station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Do you take on hotel work around Southend-on-Sea?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you take out the old sealant first?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Do you come to Southend-on-Sea?
Yes. We cover Southend-on-Sea. For a quote, ring 0345 464 0079 or drop us an email.
Can you give us a record of the work?
Yes. We record the locations we have sealed and the products used to keep with your fire safety documents.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We will tell you what we are using and why.
Is the work guaranteed?
Yes, for a year. If there’s a problem with our work in that time, tell us and we will put it right.
How long does fire rated sealant take?
Most jobs take anything from a few hours to several days, depending on how many gaps there are. We will confirm how long when we quote.
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Flag any open gap you spot round a pipe or cable
- Check whether a sealant can be painted before decorating over it
- Make resealing part of every contractor’s brief
- Plan fire stopping into any work that goes through walls or floors
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- When we can work, for business premises
- The size of the job
- Whether the work is at height
- The type of sealant required
Doing several joints on one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Photos by email, if that’s easy
- The address or postcode of the job
- Roughly how big the job is
- Whether it has been sealed before
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.