Hampshire · England
Fire Rated Sealant in Sheet
Fire rated sealant across Sheet and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Gaps around pipes and cables through fire-resisting walls
- Sealant items on a fire risk assessment action list
- Fire stopping disturbed by later work
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Fire rated sealant in Sheet, done properly
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. If you are dealing with gaps where walls meet ceilings or slabs and fire stopping disturbed by later work, we can help.
In a village or hamlet like Sheet, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
Our work is backed for twelve months.
- Where
- Sheet (GU32, GU31)
- Region
- Hampshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Workplaces and buildings in Sheet
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Rented homes near Petersfield station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Schools such as Sheet Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Sheet is about 1 mile north-east of Petersfield, in Hampshire. We provide fire rated sealant to homes and businesses in Sheet and the surrounding area. 683 places in Hampshire are on our list, large and small. Portsmouth is on our list too, about 16 miles from Sheet.
We cover every part of the GU32 and GU31 postcode area for fire rated sealant. If you need fire rated sealant at a property on Mill Lane, Village Street and Farnham Road or a nearby road, we can help. Other places close to Sheet include Petersfield (1 mile south-west), Steep (1 mile north-west), Steep Marsh (1 mile north-west), Stroud (2 miles west) and Oakshott (2 miles north-west). We also work in nearby towns such as Havant (11 miles south), Horndean (8 miles south-west), Alton (10 miles north), Waterlooville (10 miles south-west), Purbrook (11 miles south-west) and Bordon (7 miles north).
What’s near Sheet
Locally, jobs take us to homes and businesses close to The Queens Head pub, Churcher's College and The Petersfield School, among other places. The closest station to Sheet is Petersfield station, about 1.1 miles south-west. Well-known places in the area include Petersfield Community Hospital (1.3 miles south-west) and Bear Museum (1.1 miles south-west). The countryside around Sheet includes Liss Riverside Railway Walk South and Wheatham Hill.
When something else is needed
We will not take on work that won’t last, so these are the limits:
- Problems with the door itself rather than the gap around the frame
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
Where we work in Sheet
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Plasterboard & masonry
- Linear gaps
- Door frames
Your questions about fire rated sealant in Sheet
Do you work for landlords with property near Petersfield station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Sheet?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
What should I tell you?
Tell us what needs doing and where, with pictures by email if possible. We will ask anything else we need to know.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. We cut it out and reseal with a fire-rated product.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Keep photos of seals that will be hidden
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Ask every contractor to reseal any fire stopping they disturb
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Towns and villages near Sheet
Also in Sheet
Leave it or put it right?
A quick fill with any sealant to hand is not fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. In a small place like Sheet, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- 4.9 on Google from 180+ five-star reviews
- Approved under the ARBOMaster scheme
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
Read what affects the cost or our reviews.
How it works
The work is kept neat and contained to the area we’re working on, so you can get on with your day. Expect the work to take a few hours for a handful of gaps, and longer for a whole building. Somewhere as small as Sheet, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
Get a quote
For fire rated sealant in Sheet, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
What we are called out for in Sheet
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it isn’t a fire-rated seal.
If you can see any of these, it’s time to have the joints looked at:
- Open holes round services passing through fire walls
- Damaged fire sealant left by other trades
- Joints picked up in a fire-stopping survey
- Fire seals that have cracked with movement
Community buildings like Church of St Mary Magdalene are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- How long to leave it before use
- How long the guarantee is
- Whether all the old sealant comes out first
- How hidden problems are handled
How we quote for fire rated sealant
The quote reflects the job in front of us. We look at:
- The number of rooms or windows
- How easy the joints are to reach
- The product the joint needs
- The number and length of the joints
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Asking for a quote
What to tell us when you ask for a quote:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before we start.