Hampshire · England
Oakshott Fire Rated Sealant
Professional fire rated sealant in and around Oakshott, with old sealant always removed completely and a 12-month guarantee.
- Seals cut through by electricians, plumbers or data installers
- Door frames with gaps between frame and wall
- Gaps left after a refit or conversion
How we handle fire rated sealant in Oakshott
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That detail is what we take care over, one gap at a time. If you are dealing with gaps where walls meet ceilings or slabs and ordinary sealant used where a fire-rated product was needed, we can help, whatever the surface.
If you have holiday lets, a converted barn used for business or a community building near Oakshott, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Every job is covered by our 12-month guarantee, wherever you are in Hampshire.
- Location
- Oakshott (GU33, GU32)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
FAQs for Oakshott
Can you do fire rated sealant in Oakshott?
Yes. We work across London and the South East, and Oakshott is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.
Do you work for landlords with property near Liss station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in.
Can I choose the sealant colour?
In most cases you can choose. We’ll explain which colours are available and agree one before we start.
Do you work in flats, HMOs and commercial buildings?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
What happens if it’s left?
Sealant isn’t the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. Where a wall is exposed, as many are in small places like Oakshott, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What you get with us
- Quality sealants from Arbo and Everbuild
- Sanitary silicone with an anti-fungal additive in wet areas
- 20+ years of sealant experience
- Rated 4.9 stars on Google
Take a look at our cost guide or customer reviews.
Landlord and commercial work in Oakshott
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
For anyone letting property in or around Oakshott, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- Construction that doesn’t provide fire resistance on its own
- Big openings where sealant alone is not the tested solution
- Fire doors that need new seals, closers or hardware
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Oakshott
- Door frames
- Linear gaps
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
Different surfaces, different methods
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment, flat by flat if needed.
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run leaving no stretch unsealed.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
How to look after the new joints
So the new joints stay in good condition:
- Flag any open gap you spot round a pipe or cable
- Photograph sealed gaps before they’re covered up
- Check risers, ceiling voids and cupboards during building checks
- Include fire stopping when you schedule refits
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we’ll tell you which one you have.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Workplaces and buildings in Oakshott
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For buildings such as Church of St Peter and St Paul, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Liss station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Oakshott is about 3 miles north of Petersfield, in Hampshire. Whether you are in the middle of Oakshott or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Across Hampshire, we cover 683 places, and Oakshott is one of them. For nearby work, see our Portsmouth page, about 17 miles away.
Our applicators cover all of the GU33 and GU32 postcode area for fire rated sealant. Other places close to Oakshott include Hawkley (1 mile north-east), Steep Marsh (1 mile south), Lower Green (1 mile north), Steep (1 mile south) and High Cross (2 miles south-west). We also work in nearby towns such as Havant (13 miles south), Horndean (10 miles south), Alton (7 miles north), Waterlooville (12 miles south), Petersfield (3 miles south) and Purbrook (13 miles south).
Local landmarks in Oakshott
Around Oakshott, our work takes us to homes and buildings near Hawkley Inn, among other places. The nearest railway station is Liss station, roughly 2.2 miles east. A little further out are Bear Museum (3.1 miles south) and Petersfield Community Hospital (2.9 miles south). For a walk, there’s Liss Riverside Railway Walk South and Wheatham Hill.
What happens on the day
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Oakshott, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
- Plan for the work area to be out of bounds to pets and children
Get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.