Hampshire · England
Fire-rated sealant in Lower Green, Hampshire
Fire rated sealant for Lower Green, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Damaged fire sealant left by other trades
- Joints picked up in a fire-stopping survey
- Gaps around pipes and cables through fire-resisting walls
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
Fire rated sealant for homes and businesses in Lower Green
We can work through a building room by room or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. We are often asked to deal with gaps filled with a product that isn’t fire-rated and unsealed gaps where pipes and cables go through a wall, on plasterboard & masonry, linear gaps and service penetrations.
Work in a small place like Lower Green is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
Your job is guaranteed for a year, as with all our work.
- Where
- Lower Green (GU33)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Lower Green: your questions answered
Can you help a landlord with a rental near Liss station?
Yes. We work for landlords and letting agents as well as householders. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Do you cover smaller places like Lower Green?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you provide details of the products used?
Yes. You get a list of where we worked and what we used to keep with your fire safety documents.
How long does fire rated sealant take?
A typical job takes from a few hours to a few days, depending on the number of gaps and the access, including the preparation. Your quote will say how long we expect yours to take.
Can you tell me how many minutes the seal will last?
That isn’t something we state or certify. Your specification sets the requirement, and we fit a product whose tested details meet it, recording the locations and products.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can new sealant go over the old?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Aftercare tips
To keep the joints looking good and working properly:
- Never patch a fire seal with standard sealant
- Tell trades working in the building that fire seals must be put back
- Look in service cupboards and ceiling voids from time to time
- File the fire-stopping record where your assessor can find it
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
Commercial buildings in Lower Green
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Peter and St Paul are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Lower Green is about 4 miles north of Petersfield, in Hampshire. Every kind of property in Lower Green is covered for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. Our area takes in 683 places across Hampshire, from the larger towns to small villages. For nearby work, see our Portsmouth page.
Postcode districts we cover here for fire rated sealant: GU33. We also cover Hawkley (1 mile south), Oakshott (1 mile south), Empshott (1 mile north-east), Steep Marsh (2 miles south) and Selborne (3 miles north). We also work in nearby towns such as Havant (14 miles south), Fleet (15 miles north), Horndean (11 miles south), Aldershot (15 miles north-east), Alton (6 miles north) and Waterlooville (13 miles south).
Around Lower Green
We work in homes and buildings around Hawkley Inn, among other places. The closest station to Lower Green is Liss station, about 2.3 miles south-east of the centre. A little further out are The Romany Museum (2.3 miles north) and Petersfield Community Hospital (4.1 miles south). Green spaces nearby include Goleigh Hill and Liss Riverside Railway Walk North.
Why deal with it now?
Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. In a small place like Lower Green, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.
Why Lower Green customers choose us
- We never seal over old sealant
- Sanitary silicone with an anti-fungal additive in wet areas
- Approved under the ARBOMaster scheme
- Neat joints and a tidy finish
Take a look at what affects the cost and our reviews.
Also near Lower Green
What else we do in Lower Green
Do you need fire rated sealant in Lower Green?
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
People usually contact us after spotting something like this:
- Joints picked up in a fire-stopping survey
- Gaps around pipes and cables through fire-resisting walls
- Unsealed gaps around fire door frames
- Damaged fire sealant left by other trades
For landlords with property near Liss station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Before booking anyone
- Whether VAT is included
- What insurance they hold
- How the surfaces are prepared before sealing
- What the cure time is
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
How it works
The work is kept neat and contained to the area we’re working on. The job generally takes from a few hours to a few days, depending on the number of gaps and the access, and we tell you how long to leave it before we go. Somewhere as small as Lower Green, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Advice
Quotes for fire rated sealant in Lower Green
Jobs vary more than people expect. What affects the quote:
- When we can work, for business premises
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- The amount of work
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Helping us quote
What to tell us when you ask for a quote:
- If someone has resealed it before
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- Photos by email, if that’s easy
Need a quote? Please phone 0345 464 0079 or email us with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.