Isle of Wight · England
Fire-rated sealant in Seaview, Isle of Wight
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Seaview and across the Isle of Wight. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Ordinary sealant used where a fire-rated product was needed
- Open gaps behind door architraves
- Gaps left after a refit or conversion
How we handle fire rated sealant in Seaview
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. We work on flats & HMOs, pipe & cable gaps and plasterboard & masonry, and people most often call us about gaps left after a refit or conversion and sealant items on a fire risk assessment action list.
If you have holiday lets, a converted barn used for business or a community building near Seaview, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
A 12-month guarantee comes as standard, so you’re covered after we’ve gone.
- Location
- Seaview (PO34)
- Region
- Isle of Wight
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What fire rated sealant looks like in Seaview
For seaside hotels, guest houses and holiday lets around Seaview, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as St. Peter's Church, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Smallbrook Junction station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Nettlestone Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Seaview is about 2 miles east of Ryde, in the Isle of Wight. Whether you’re in the middle of Seaview or further out, fire rated sealant is available for homes and businesses alike. Seaview is one of 125 places in the Isle of Wight where we work. You can also see our page for Portsmouth, roughly 6 miles from Seaview.
Jobs for fire rated sealant in PO34 is quoted and booked the same way as anywhere else. Whether your property is on High Street, Madeira Road and Church Street or anywhere close by, our applicators can take on the job. Other places close to Seaview include Nettlestone (1 mile south), Spring Vale (1 mile north-west), Pondwell (1 mile west), Puckpool (1 mile west) and Appley (2 miles west). Larger places within reach include Newport (8 miles west), Cowes (9 miles west), Sandown (5 miles south-west), Shanklin (7 miles south-west), Ventnor (10 miles south-west) and East Cowes (8 miles west). Island and remote addresses take a little more planning, so please mention your location when you ring 0345 464 0079 or drop us an email.
Landmarks near Seaview
In Seaview, that means homes and buildings near The Boat House and the streets around them. For rail, the closest station is Smallbrook Junction station, roughly 2 miles west. A little further out are Southsea Castle (4.1 miles north) and Gosport War Memorial Hospital (5.3 miles north). The countryside around Seaview includes Brading Down and Alan Hersey Nature Reserve.
Towns and villages near Seaview
More services for Seaview
Seaview: your questions answered
Will you come out to Seaview?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Smallbrook Junction station. Can you help?
Yes. We work for landlords and agents as well as householders. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
What do you need from me for a quote?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Are you fully insured?
Yes. Full insurance covers our work.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Seaview and the rest of the Isle of Wight, along with the rest of our area.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control and install to the manufacturer’s details.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Quotes for fire rated sealant in Seaview
The quote reflects the job in front of us. We take into account:
- Any working-time requirements on site
- The old material and how stubborn it is
- Mould in or behind the old joints
- How easy the joints are to reach
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
What to tell us for a quote
To make quoting easier, let us know:
- A few photos by email, if you can
- Where the job is, and your postcode
- Whether it’s a home or a business
- What the problem is, such as mould, gaps, leaks or cracking
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Landlords, agents and businesses in Seaview
If you manage several properties in or around Seaview, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Honest limits
A few problems are outside what sealant work can do:
- Sign-off of the building, which sits with building control or your assessor
- Assessing a building’s fire safety
- Walls or floors that weren’t built to resist fire
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Surfaces we seal
- Service penetrations
- Plasterboard & masonry
- Door frames
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
How the job changes by surface
Flats and HMOs
Conversions usually leave a mix of old and new service holes. We seal the ones on your specification with a tested product.
Door frames
Frame gaps are usually hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size.
Why it’s worth doing now in Seaview
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now means you can show the action was taken. In a small place like Seaview, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Why choose Mr Mastic in Seaview
- Experience in homes, commercial sites and hotels
- Tidy, careful work
- Old sealant always removed completely
- 4.9 on Google from 180+ five-star reviews
See our cost guide or our reviews.
How the visit works
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Seaview, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Let us know about stairs, lifts or work at height
- Mention any leaks or damp you’ve noticed
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.