Isle of Wight · England
Fire Rated Sealant in Spring Vale
Fire-stopping gaps in Spring Vale need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Unsealed gaps where pipes and cables go through a wall
- Seals cut through by electricians, plumbers or data installers
- Open joints along the top of partitions
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Fire rated sealant for homes and businesses in Spring Vale
Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. If you have joints picked up in a fire-stopping survey and fire stopping disturbed by later work, we can put it right, on flats & HMOs, plasterboard & masonry and pipe & cable gaps alike.
If you have holiday lets, a converted barn used for business or a community building near Spring Vale, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
We stand behind the work with a 12-month guarantee, so you’re covered after we have gone.
- Where
- Spring Vale (PO34)
- Wider area
- Isle of Wight
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
When to call us in Spring Vale
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It looks sealed, but it isn’t fire-rated.
If you can see any of these, it’s time to have the joints looked at:
- Sealant items on a fire risk assessment action list
- Holes left by a change of layout
- Unsealed gaps where pipes and cables go through a wall
- Open joints along the top of partitions
If you let a flat or house near Ryde St Johns Road station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Before booking anyone
- Whether they’re fully insured
- Is the old sealant removed completely?
- How hidden problems are handled
- Which sealant they’ll use, and why
What happens if it’s left?
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. Around Spring Vale, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email.
What you get with us
- Over 20 years’ experience
- One-year guarantee on every job
- An ARBOMaster approved applicator
- Homes, businesses and hotels
Surface by surface
Flats and HMOs
Conversions generally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product.
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Workplaces and buildings in Spring Vale
If you run a hotel, guest house or holiday let in a coastal place like Spring Vale, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like St. Peter's Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there. Managing a site like Nettlestone Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Spring Vale is about 2 miles east of Ryde, in the Isle of Wight. Spring Vale gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 125 towns and villages across the Isle of Wight. We also work in Portsmouth, about 6 miles from Spring Vale.
Postcode districts we cover here for fire rated sealant: PO34. You’ll find streets such as Springvale Road and Oakhill Road. Neighbouring places we cover for fire rated sealant include Puckpool (1 mile west), Pondwell (1 mile south), Seaview (1 mile south-east), Appley (1 mile west) and Nettlestone (1 mile south-east). We also work in nearby towns such as Newport (8 miles west), Cowes (8 miles west), Sandown (5 miles south), Shanklin (7 miles south), Ventnor (10 miles south-west) and East Cowes (7 miles west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Spring Vale
Around Spring Vale, our work takes us to homes and buildings near Ryde Academy and The Boat House. The closest station to Spring Vale is Ryde St Johns Road station, about 1.4 miles west of the centre. A little further out are Cothey Bottom Heritage Centre (1.2 miles south-west) and Gosport War Memorial Hospital (4.9 miles north). Open spaces near Spring Vale include Brading Down and Alan Hersey Nature Reserve.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Get damaged fire seals looked at promptly
- Never patch a fire seal with standard sealant
- Make resealing part of every contractor’s brief
- Look in service cupboards and ceiling voids from time to time
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot, so ask us which we used.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
The process
There isn’t much for you to do on the day. Show us the job and we will take it from there. The work itself takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. In a small place like Spring Vale, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Mention any parking rules near the property
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
How to get a quote
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. We will send you a clear quote before any work starts.
Read more
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
FAQs for Spring Vale
Can you help a landlord with a rental near Ryde St Johns Road station?
Yes. We work for letting agents and landlords as well as homeowners. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Is Spring Vale within the area you cover?
Yes. Spring Vale is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
How long will you be here?
Most jobs take anything from a few hours to several days, depending on how many gaps there are, including preparation and clearing up. We will confirm how long when we quote.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Can I add another job to the visit?
Yes. Just list everything you need and you’ll get one quote.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.