Perth and Kinross · Scotland
Fire-rated sealant in Scotlandwell, Perth and Kinross
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Scotlandwell and across Perth and Kinross. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps filled with a product that isn’t fire-rated
- Joints picked up in a fire-stopping survey
- Unsealed gaps where pipes and cables go through a wall
Fire rated sealant in Scotlandwell, done properly
We often work from an action list drawn up by a fire risk assessor. Send us the list or the survey and we will quote for the fire-rated sealant work on it. Common call-outs are for gaps around pipes and cables through fire-resisting walls and door frames with gaps between frame and wall, on plasterboard & masonry, linear gaps and service penetrations.
If you look after holiday lets, a guest house or a community building in or near Scotlandwell, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Your job is guaranteed for a year, as with all our work.
- Where
- Scotlandwell (KY13)
- Region
- Perth and Kinross
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Commercial buildings in Scotlandwell
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
If you let a flat or house near Lochgelly station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Portmoak Parish Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Scotlandwell is about 5 miles west of Glenrothes, in Perth and Kinross. If you need fire rated sealant in Scotlandwell, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Perth and Kinross from our Crawley base. Across Perth and Kinross, we cover 107 places, Scotlandwell among them. Our Edinburgh page covers work nearby, about 18 miles away.
We cover every part of the KY13 postcode area for fire rated sealant and the streets around it. You’ll find streets such as The Causeway, Wellside Park and Friar Place, and we cover them all. Other places close to Scotlandwell include Ballingry (3 miles south), Lochore (3 miles south), Crosshill (3 miles south), Glencraig (4 miles south) and Maryburgh (5 miles south-west). We also work in nearby towns such as Perth (15 miles north), Kinross (4 miles west), Letham (15 miles north-west), Oakbank (14 miles north-west), Hillyland (15 miles north-west) and Bridge of Earn (11 miles north).
Near you in Scotlandwell
Locally, jobs take us to homes and businesses close to The Well Country Inn and the streets around them. Scotlandwell’s nearest station is Lochgelly station, about 4.5 miles south of the centre. Well-known places in the area include Glenrothes Hospital (5.1 miles east) and Strathenry Castle (2.5 miles east). Open spaces near Scotlandwell include Loch Leven National Nature Reserve and Loch Leven.
What happens on the day
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Scotlandwell depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Before we arrive
- Mention any parking rules near the property
- Try not to wet indoor joints just before the visit
- Mention if the joints have been sealed before
How to get a quote
Want a quote for fire rated sealant? Please send an email to info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Common questions in Scotlandwell
How do Scotland’s building regulations apply to fire-rated sealant in Scotlandwell?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Do you work for landlords with property near Lochgelly station?
Yes. We work for letting agents and landlords as well as homeowners. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
What does fire rated sealant cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Do you provide details of the products used?
Yes. You get a list of where we worked and what we used for your files.
How long does fire rated sealant take?
As a guide, most jobs take a few hours for a handful of gaps, and longer for a whole building. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Do you carry out fire risk assessments?
No. We work from the specification you give us and install to the manufacturer’s details.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Photograph sealed gaps before they’re covered up
- Do not paint over fire sealant until it has cured
- Include hidden areas like risers in routine checks
- Keep the record of products and locations with your fire safety documents
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so the item can be closed.
What the job involves on each surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Nearby places to Scotlandwell
Other services in Scotlandwell
How we quote for fire rated sealant
Jobs vary more than people expect. The main factors:
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- Any mould that needs treating
- How easy the joints are to reach
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts.
Helping us quote
When you contact us, it’s useful to know:
- The address or postcode of the job
- A few pictures by email, if you can
- Roughly how big the job is
- Whether it has been sealed before
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Landlord and commercial work in Scotlandwell
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Large holes that need a different fire-stopping system
- Fire risk assessments, which need a qualified assessor
- Certifying a building or signing off its fire safety
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Service penetrations
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Linear gaps
What happens if it’s left?
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the sealing itself is often a contained piece of work. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- We leave the area clean and tidy
- 180+ five-star Google reviews
- Anti-fungal sanitary silicone in wet areas
- Full insurance on every job
Take a look at our cost guide or customer reviews.