Fife · Scotland
Fire-rated sealant in Keltybridge, Fife
Fire rated sealant across Keltybridge and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Seals cut through by electricians, plumbers or data installers
- Door frames with gaps between frame and wall
- Gaps flagged on a fire risk assessment
Fire rated sealant for homes and businesses in Keltybridge
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. Typical jobs include sealant items on a fire risk assessment action list and seals cut through by electricians, plumbers or data installers, on pipe & cable gaps, plasterboard & masonry and linear gaps.
For holiday lets, guest houses and community buildings in or near Keltybridge, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is covered for a year after we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Where
- Keltybridge (KY4)
- Region
- Fife
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Make resealing part of every contractor’s brief
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Don’t paint over fire sealant until it has cured
- Keep the record of products and locations with your fire safety documents
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
Landlords, agents and businesses in Keltybridge
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
What affects the cost of fire rated sealant
The price is agreed before any work begins. It takes into account:
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- Whether the work is at height
- Working hours on commercial sites
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- The type of property
- The problem you’ve noticed
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Why deal with it now?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Why book with us
- Approved under the ARBOMaster scheme
- We’re fully insured
- We leave the area clean and tidy
- We never seal over old sealant
Read our cost guide or our reviews.
When to call us in Keltybridge
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Signs it’s time to call us include:
- Gaps around pipes and cables through fire-resisting walls
- Open joints along the top of partitions
- Cracked or shrunken fire-rated sealant
- Sealant items on a fire risk assessment action list
Community buildings like Parish Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- Which sealant they’ll use, and why
- What happens if they find a problem under the old sealant
- What the quote includes, VAT included or not
- Whether they seal over old material or remove it
Also in Keltybridge
What happens on the day
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the amount of work. Outdoor work around Keltybridge depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
- Let us know if you’ve seen damp or leaks
Getting a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
Different surfaces, different methods
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Flats and HMOs
Conversions usually leave a mix of old and new service holes. We seal the ones on your specification with a tested product.
Keltybridge questions
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
I let a flat near Cowdenbeath station. Can you help?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
How do I get a quote for fire rated sealant in Keltybridge?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply drop us a line at info@mrmastic.co.uk.
What does intumescent mean?
Intumescent means it swells when heated. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Where is Mr Mastic based?
We work from Crawley. We cover Keltybridge and the rest of Fife.
Can you quote for more than one area?
Yes. Just list everything you need.
What fire rated sealant looks like in Keltybridge
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
For landlords with property near Cowdenbeath station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Beath High School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Keltybridge is about 6 miles north of Dunfermline, in Fife. Whether you are in the middle of Keltybridge or further out, fire rated sealant is available for homes and businesses alike. Across Fife, we cover 133 places, Keltybridge among them. We also work in Edinburgh, about 16 miles from Keltybridge.
Here we cover the KY4 postcode area for fire rated sealant. Streets in the area include Abbot's Wynd and Middleton Park, and we cover them all. Other places close to Keltybridge include Maryburgh (1 mile north-west), Kelty (1 mile south), Crosshill (2 miles east), Lochore (3 miles east) and Glencraig (3 miles east). We also work in nearby towns such as Dunfermline (6 miles south), Kirkcaldy (9 miles east), Glenrothes (9 miles north-east), Leven (15 miles east), Cowdenbeath (3 miles south-east) and Dysart (10 miles east).
What’s near Keltybridge
For rail, the closest station is Cowdenbeath station, about 2.8 miles south-east. Well-known places in the area include Lathalmond Railway Museum (3.3 miles south-west) and Lochore Castle (2.2 miles east). Not far away are Loch Fitty and Benarty Hill.