West Sussex · England
Fire Rated Sealant in Pulborough
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Pulborough, with a 12-month guarantee on every job. Ask us for a quote.
- Sealant items on a fire risk assessment action list
- Open gaps behind door architraves
- Linear gaps at the head of walls
About our fire rated sealant in Pulborough
We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on flats & HMOs, plasterboard & masonry and pipe & cable gaps, and common reasons people get in touch are gaps where walls meet ceilings or slabs and fire seals that have cracked with movement.
For a pub, café, guest house or shop in or near Pulborough, the washrooms and kitchen need the same attention as a big site.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Place
- Pulborough (RH20)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service against the product’s tested range.
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run.
When to call us in Pulborough
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
Most people get in touch after spotting one of these:
- Unsealed gaps around fire door frames
- Holes left by a change of layout
- Old fire sealant that has split or come away
- Gaps around pipes and cables through fire-resisting walls
If you let a flat or house near Pulborough station, any gap left by new services in shared walls should be closed with a fire-rated product.
Before booking anyone
- What happens if the job turns out different
- Which colour the sealant will be
- How long to leave it before use
- The length of the guarantee
Questions from Pulborough
Will you come out to Pulborough?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Pulborough station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Can I choose the sealant colour?
We help you choose a colour that suits. The product needed can limit the range.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can you give us a record of the work?
Yes. When the job is done, we give you the locations and products. Tell us if your assessor needs it in a particular format.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Can you tell me which gaps need fire stopping?
No, assessment is not something we do. When your assessor or designer has set out what’s needed, we will quote for the sealant work on it.
Workplaces and buildings in Pulborough
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as St Mary's Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in. Community buildings like The Parish Church of St Mary are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Pulborough is about 10 miles north of Littlehampton, in West Sussex. Whether you are in the middle of Pulborough or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Across West Sussex, we cover 371 places, and Pulborough is one of them. Crawley is on our list too, about 17 miles from Pulborough.
We cover every part of the RH20 postcode area for fire rated sealant and the streets around it. You will find streets such as London Road, Station Road and Rectory Close, and we cover them all. You will find Pulborough on the A283, so it’s easy for us to get to. Nearby, we also carry out fire rated sealant in Hardham (1 mile south-west), Pickhurst (1 mile north-west), Coldwaltham (2 miles south-west), Fittleworth (3 miles west) and Bedham (3 miles west). Within a short drive, we also cover Horsham (11 miles north-east), Worthing (10 miles south-east), Bognor Regis (14 miles south-west), Chichester (15 miles south-west), Littlehampton (10 miles south) and Shoreham-by-Sea (13 miles south-east).
Around Pulborough
Typical jobs here are in homes near The Oddfellows Arms. For rail, the closest station is Pulborough station, about 0.6 miles west of the centre. Nearby you’ll also find The Storrington And District Museum (3.8 miles south-east) and Coates Castle (3.8 miles west). Open spaces near Pulborough include Amberley Wildbrooks RSPB Reserve.
Nearby places to Pulborough
More services for Pulborough
What affects the quote in Pulborough
You’ll get a clear quote before any work starts. It’s based on:
- Mould in or behind the old joints
- How easy the joints are to reach
- Working hours on commercial sites
- The product the joint needs
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.
Helping us quote
When you contact us, it’s useful to know:
- A few photos by email, if you can
- The rough size of the job
- If someone has resealed it before
- Access, such as stairs, a lift or height
Asking for a quote is easy: let us know what needs doing and where and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
What sealant work can’t fix
We’ll always be straight with you, so here’s what new sealant will not do:
- A wall that is not a fire-resisting element to begin with
- Doors that aren’t fire doors in the first place
- Openings too large for sealant, which need batts, boards or another system
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Service penetrations
- Pipe & cable gaps
- Plasterboard & masonry
- Linear gaps
- Door frames
- Flats & HMOs
What happens if it’s left?
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own. Around Pulborough, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Call for a quick quote and we’ll explain what it covers.
Why choose Mr Mastic in Pulborough
- We never seal over old sealant
- Tidy, careful work
- Homes, businesses and hotels
- An ARBOMaster approved applicator
Take a look at how sealant jobs are priced and what customers say.
The process
Before we leave, we go over the finished joints with you. The visit itself generally takes a few hours for a handful of gaps, and longer for a whole building, depending on the amount of work. For a job in Pulborough, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Let us know about earlier repairs to the joints
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and give you a clear quote.
Related advice
Work for landlords, hotels and businesses
For anyone letting property in or around Pulborough, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.